NTM Rotorantrieb 450 Series 3400KV / 500W

• Overall
• Quality
• Value

Certified Buyer Rated

May 26, 2015

good over all well made

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 15, 2015

No issues, only thing I found a little strange was the motor wires were stiff and stayed in whatever position they were bent. Did give the feeling they would snap if bent back and forth too much

• Overall
• Quality
• Value

Customer Rated

Dec 19, 2014

Bought it for HK 450 heli. This is not fit. Different distance for mounting holes, comes without screw. HK 450 using 3mm screw and 3.17mm pinion holes. This one has 2.5mm mounting screw and 3.5mm holes. Building my first heli from scratch so I did not know about differences pinion and mounting holes. I hope this info can help someone else with similar experience :)

• Overall
• Quality
• Value

Customer Rated

Oct 17, 2014

Purchased this motor for a HK450 pro and it wont fit unless you grind away to carbon frame i think its a waste of money also wires are solid not flexible wont recommend this one

Andy

• Overall
• Quality
• Value

Customer Rated

Sep 21, 2014

Great motor, run very efficient on a hk 450 pro FBL TT. But remember its not 3.17mm pinion, you need an align 3.5mm pinion.

• Overall
• Quality
• Value

Customer Rated

Jul 06, 2014

I've tried several replacement motors on my B450x, and so far this has been the best. Fitted with a lynx slant 12t pinon, I still have plenty of power for sport 3d flying on my tired batteries. Drop in a 13t if your batteries are a true 45c rating. Contrary to the description it is 6 pole, and note that it is a 3.5 shaft and 2.5 mounting holes.

• Overall
• Quality
• Value

Customer Rated

Apr 26, 2014

I've just bought one of these. The issue isn't the mount centres nor the screw size. It's the fact the shaft is 3.50mm and not the standard 3.17mm so my pinion doesn't fit.
My fault really, should have checked. Just got to get a new pinion now. Not the cost that's an issue, but had I realised atvthe time I ordered it I could have bought a matching pinion at the same time.
Or a different motor. . . . . .

• Overall
• Quality
• Value

Customer Rated

Dec 12, 2013

Preisgnstiger, sehr starker Motor fr den 450er Heli. Die Verarbeitung ist Erwartungsgem nicht ganz so schn wie bei einem Align oder Scorpion. Der Statortrger ist scharfkantig genauso wie die Lcher im Geblse. Auf der Glocke war ein trber Schmier, der mit Aufkleberentferner runter ging.
Motor luft vergleichsweise leicht mit wenig Rastmoment. Kein Lagerspiel und vibrationsfreier Lauf. Wrde ich wieder kaufen.

• Overall
• Quality
• Value

Customer Rated

Nov 02, 2013

I've just bought one as recommended for a HK-450GT PRO V2 3D Belt-Drive Helicopter Kit.
The bolt holes are not 16 x 16 mm but 11 x 11 mm instead, which doesn't match the receiving part of the hell (would need 16 x 16 as specified above. The bolt thread isn't 2mm - 2.5mm may be correct if it's not imperial.

Disappointing - I'll have to buy a different one, hoping that it will fit.

• Overall
• Quality
• Value

Customer Rated

Jul 01, 2013

Excellent motor for my 450 TT PRO V2. So much more torque and power than the motor I was using before. Before I was flying with a lesser motor and crashed more than once due to a lack of power when I needed to get out of a hairy situation. With this motor I can hover at near half stick as long as the battery lasts with great control and an excess of reserve power when i need it.