Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Nylon Spinner 3.25inch

Nylon Spinner 3.25inch

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

3,74 €
Status:
Auf Lager
SKU:
OR002-00308
WANT FREE SHIPPING? Click here to find out more!

Nylon Spinner w / Zubehör
Adapterringe lieferte eine Vielzahl von Wellengrößen zu akzeptieren.

  • Artikelbezeichnung OR002-00308
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 40.0000
  • Länge 85.00
  • Breite 82.00
  • Höhe 82.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The quality is what you would expect for a cheap item, not to bad for the money but definitely not precision.
The main issue is that larger sized props with a large hub will not fit between the screw hole lugs for mounting the cone to the backplate, and as this a larger sized spinner that cant take larger props it is a bit of a WOFTAM, this is the reason for the poor overall rating that I gave it and it doesn't matter how cheap the spinner is, if you cant use it then that's not very good value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The quality is what you would expect for a cheap item, not to bad for the money but definitely not precision.
The main issue is that larger sized props with a large hub will not fit between the screw hole lugs for mounting the cone to the backplate, and as this a larger sized spinner that cant take larger props it is a bit of a WOFTAM, this is the reason for the poor overall rating that I gave it and it doesn't matter how cheap the spinner is, if you cant use it then that's not very good value.

Great spinner and backing plate not only for the money but very well done in fit and finish. That being said, always be sure to fit and match the assembly as it was when polished to equal mass at the factory., for it will go together both matched, or 180 degrees out from factory finish which is used as the means of balancing. To determine which position the spinner should address the backing plate., be sure when fitted the 2 surfaces are matching perfectly with regard to the polished outer surface at the junction of the two pieces. If there appears to be a slight step where they come together or a slight shoulder., rotate the mating point 180 degrees to achieve a perfect match at the mating of the outer surfaces. Be sure to balance your prop first. These are very well done units and must be installed correctly to reap the best results....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great spinner and backing plate not only for the money but very well done in fit and finish. That being said, always be sure to fit and match the assembly as it was when polished to equal mass at the factory., for it will go together both matched, or 180 degrees out from factory finish which is used as the means of balancing. To determine which position the spinner should address the backing plate., be sure when fitted the 2 surfaces are matching perfectly with regard to the polished outer surface at the junction of the two pieces. If there appears to be a slight step where they come together or a slight shoulder., rotate the mating point 180 degrees to achieve a perfect match at the mating of the outer surfaces. Be sure to balance your prop first. These are very well done units and must be installed correctly to reap the best results....

Buen producto, de excelente terminacion en relacion del precio del mismo con. Lo he he utilizado en un ASP 108 y no he tenido problemas. Ademas tiene un peso muy bajo no afectando del centro de gravedad. Gracias HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buen producto, de excelente terminacion en relacion del precio del mismo con. Lo he he utilizado en un ASP 108 y no he tenido problemas. Ademas tiene un peso muy bajo no afectando del centro de gravedad. Gracias HK

this spinner does not fit my ftl52cc with 20x10 and 20x8 NOT WORK , The holes dont fit with the propeller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this spinner does not fit my ftl52cc with 20x10 and 20x8 NOT WORK , The holes dont fit with the propeller

bought one of these about 6 months ago and it works fine

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought one of these about 6 months ago and it works fine

The cone overhangs the backplate by about 0.5mm. The hole appears to be like an APC prop with a 9.5mm "precision" hole and a 9mm inner hole. It comes with 4 inserts and 4 wood scres to hold it together. The colour is off white and the shape is a cross between a P-51 parabolic and a P-40 ogive.



Compared to the twice as expensive GP big spinners this is another case of "you get what you pay for".

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The cone overhangs the backplate by about 0.5mm. The hole appears to be like an APC prop with a 9.5mm "precision" hole and a 9mm inner hole. It comes with 4 inserts and 4 wood scres to hold it together. The colour is off white and the shape is a cross between a P-51 parabolic and a P-40 ogive.



Compared to the twice as expensive GP big spinners this is another case of "you get what you pay for".

. . 85

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

. . 85

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!