Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

OrangeRX öffnen LRS 433MHz Transmitter 1W (JR / Turnigy kompatibel)

Generating Links

OrangeRX öffnen LRS 433MHz Transmitter 1W (JR / Turnigy kompatibel)

Preis:

Now save speichern 10,15 € 10,15 €

Special Price 22,22 € 22,22 €

You save speichern 10,15 € 10,15 €

Was  32,37 €

Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9171000284-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Die alle neuen OrangeRX öffnen LRS TX-Modul ist ein Open-Source-Sendemodul, die programmiert werden können, Ihre Wahl des Protokolls und einen beliebigen Kanal im Bereich von 400 ~ 460MHz Bereich zu verwenden. Es ist ein voll benutzerdefinierbare HF-Sender-System. Es kann sogar zusätzliche Funktionen wie Telemetrie, wenn sie mit dem OrangeRX OpenLRS Rx-Modul verwendet zu nutzen programmiert werden.

Die OrangeRX öffnen LRS TX-Modul ein sehr vielseitiges Gerät ideal für kundenspezifische Projekte.
Es nutzt eine 1000mW RF-Einheit und Atmega328 Prozessor mit Arduino Bootloader so dass Sie bereits geschriebenen Codes oder schreiben Sie Ihre eigene zu laden Sie Ihre Sender Bedürfnisse anzupassen.

Der Standardcode verwendet 3-Kanal-Frequenz-Hopping. Wenn Sie ein anderes Protokoll verwenden möchten, können Sie Ihre eigenen Hopping-Codes schreiben oder einfach eine der vielen bereits geschriebenen OpenLRS Code-Sets Download bereits verfügbar.

Eigenschaften:
• 3,3 V FTDI Unterstützung für die einfache Programmierung (NICHT 5V seriell / AVRISP Adapter verwenden)
• Serielle Schnittstelle für Firmware-Upload und Telemetrie-Anwendung
• I2C-Anschluss für Sensoranwendungen (Wii Motion Plus basierte Headtracker)
• 16 MHz Atmega328 Prozessor mit Arduino Pro Mini kompatibel Bootloader.
• LM2937 3,3 V Spannungsregler
• UFL-Anschluss zwischen PCB und Antenne
• Summer für akustische Informationen
• 1000 mW Leistung, Frequenz-Hopping-Fähigkeit und Hunderte von Funktionen

Specs:
Kompatibilität: 5-polig JR kompatibles Modul-basierte Sender
Frequenz: 433 MHz
Spannungseingang: 6,8 ~ 12VDC
IC: ATMEGA328P
Leistung: 1000mW
Strecke: Umfassendes Angebot System

Eingeschlossen sind:

OrangeRx OpenLRS Tx-Modul (JR-kompatibel)
Antenne

* Anmerkung: Die Einrichtung und Nutzung von Open LRS erfordert Computer Programmierkenntnisse und grundlegende Arduino Erfahrung. Dies ist kein "Plug and Play" -System. Siehe die beigefügten Dokument unter der Registerkarte "Dateien" für Ressourcen zur Programmierung Info, Firmware-Downloads und vieles mehr.

* Hinweis: Open LRS verwendet Unterstützung 3.3V FTDI, wird nicht auftreten , eine 5V - Seriell / AVRISP Adapter oder Schaden.

* Hinweis: Bitte kontaktieren Sie Ihren örtlichen Behörden den Betrieb dieses Gerätes in Bezug auf, bevor Sie kaufen. Verordnungen über die Leistung, nutzbaren Frequenzen und Lizenzen "zu betreiben variieren von Region zu Region.

* Hinweis: Dies ist kein Original Arduino Markenprodukt.

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

paolo | Verifizierter Käufer

  • Overall
  • Quality
  • Value

ok

Mar 09, 2021

tutto ok

Bordas | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Bonjour

Mar 19, 2020

good

Vanja ZD | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Excellent device

Feb 28, 2020

Fantastic device for DIY long range systems Open LRS or ULRS. Power is about 400 mW out of box but it can be easy step up to 1 or 2 Watts.

grabberr | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Inexpensive long range system!

Dec 31, 2019

These are a good price for a long range system. Module quality is good, but the included antenna is not very good. Make sure you read up on the mods these require to really work well, the tx voltage must be increased to get an actual 1W of power, but this is simple to do. I am using it with Ultimate LRS and it is working well so far.

NEVdD | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 08, 2016

This was the best emitter that could even be used as receiver using the Ultimate LRS software. Compatible with Ardupilot telemetry, it provides an awesome range.
Considering that you don't even need the hkpilot telemetry set when you use these, I can say the value for the price is amazing. Please HK we need restock! Check the ultimate LRS website to see the improvments that you should make to this module to get the best range possible.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 14, 2015

Best LRS option considering its price in the market so adviced.

RicardoS | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 05, 2015

good for mods with my apm. nice

joseph | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 14, 2015

these have crap range out of the box but all you need is to turn the stock antenna into a half wave whip all you need is a wire and antenna tube start at 350mm and slowly cut it back checking rrsi dont cut shorter than 310mm use a quarter wave on rx i left the rx in my house and walked half way across town without lossing signal i didnt go to the max range ill never fly that far away

illusive | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 21, 2015

WARNING! I bought 3 of these orange lrs modules and in ALL of them the ground plane on the pigtail was broken. If you are getting 200-300m range probably yours is broken too. And here is the real fun part: You probably burned the TX at this point(practically run the module without antenna)

I strongly recommend running a continuity test on the pigtail before ever turning the module on. Also if you have an soderin iron put dab of soder on SMA's pins. That was botced one of my modules too. Seriously messed up QC

Eurny666 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 20, 2015

After a couple of months I have been trying to get my OpenLRS Orange RX 1W TX to work correctly. It's still not, at least not as good as you'd expect it to work.
No problem with the flashing process (OpenLRSNG) and binding, so far everything was fine. However, even with decent antennae (SR771 on TX and Sander on RX), the maximum range I could achieve was 1.8Km, beyond that the RX went into failsafe. Not even close to what you can get with FrSky system (I have achieved 2.5Kms easily).
I also had a defective pintail that was replaced by an SMA cable directly soldered onto the board. At full power, the transmitting power is ~420mW which is supposed to give ~50Km range with good antennae.
A friend of mine had the same setup and didn't manage to get it to work correctly having a range even worse than mine. We decided to go back to FrSky which works way beyond what you can expect of a 2.4G system.

  1. 1
  2. 2
  3. 3
Kundendateien
Conexión externa FTDI al receptor Download [3366]
how connect tx module to hk usb tool Download [2623]
Flash OrangeRX LRS FW and Taranis Download [1236]
this document helped me alote Download [164]
ULRS - Go for it Download [773]
better photo of pcb Download [4350]
No File Name Download [2054]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!