Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

P1 High Voltage Wattmeters (100amp)

P1 High Voltage Wattmeters (100amp)

Discontinued Product

Please continue searching for a similar product.
SKU:
HKP1HV
WANT FREE SHIPPING? Click here to find out more!

Die Hobbyking P1 High Voltage Wattmeters ist ein Muss Werkzeug für jeden Werkzeugkasten EP-Flyer. Das Messgerät zeigt Watt, Ampere und Volt auf dem gleichen Bildschirm und verfügt auch über eine Hold-Funktion, die die Peak-Messungen während des Tests genommen werden aufgezeichnet und angezeigt werden soll. Zu diesem Preis können Sie eine für die Werkstatt haben und eine für den Werkzeugkasten!

Dieses Messgerät verwendet einen P1 HV Stromsensor, der eine genauere Messung als die weniger teuren PO-Typ Widerstand Shunt gibt.

Specs:
Spannungsbereich: 6 ~ 50V
Strombereich: 0 ~ 100A
Anzeige: Volt / Amp / Watt
Manuelle Kalibrierung
Datenaufnahme

Erforderlich:
Anschlußstecker

  • Artikelbezeichnung HKP1HV
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 79.0000
  • Länge 125.00
  • Breite 20.00
  • Höhe 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Have received this product today. Power button missing and floating somewhere inside the body. Screen died whilst still calibrating with 6S attached. Sorry - utter rubbish at this price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have received this product today. Power button missing and floating somewhere inside the body. Screen died whilst still calibrating with 6S attached. Sorry - utter rubbish at this price!

The quality isn't great, but for the price it's okay. HK needs to check before shipping because mine arrived without the little blue button. It had come apart inside. The button was obviously glued to something to allow it to reach the pcb mounted switch on the circuit board. Luckily the enclosure pops apart easily and I made up a new button and fixed it. Once the unit is calibrated I think the readings are pretty close but obviously this is not a precision instrument.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The quality isn't great, but for the price it's okay. HK needs to check before shipping because mine arrived without the little blue button. It had come apart inside. The button was obviously glued to something to allow it to reach the pcb mounted switch on the circuit board. Luckily the enclosure pops apart easily and I made up a new button and fixed it. Once the unit is calibrated I think the readings are pretty close but obviously this is not a precision instrument.

Very nice. Bought this specifically to measure the power usage on my H.A.L. hex. It's very light and not an issue for the hex. Stores max values so you can check them when you land.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice. Bought this specifically to measure the power usage on my H.A.L. hex. It's very light and not an issue for the hex. Stores max values so you can check them when you land.

Love this unit. I have this on my PSU to make sure I dont go over in Amps with 3 chargers connected to it. So far I have it at 18v and up to 45A for over 1hr. A perfect addition to a charge station

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this unit. I have this on my PSU to make sure I dont go over in Amps with 3 chargers connected to it. So far I have it at 18v and up to 45A for over 1hr. A perfect addition to a charge station

Good: Small and handy meter. Pointed correct voltage and current with 12 V input.

Bad: 'Hold' button is too deep in the case to use with fingers. If push it with a tool tip the button tends to jam itself down.

When first time tested it with 40 V input the meter died. So at least my example did not live nearly up to the specified 50 V input.

Could not test with high current because the meter was so short lived.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good: Small and handy meter. Pointed correct voltage and current with 12 V input.

Bad: 'Hold' button is too deep in the case to use with fingers. If push it with a tool tip the button tends to jam itself down.

When first time tested it with 40 V input the meter died. So at least my example did not live nearly up to the specified 50 V input.

Could not test with high current because the meter was so short lived.

Great little item. I use this for setting up motors/props/esc's/battery combinations. A must if you want to avoid overloading and destroying your equipment.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little item. I use this for setting up motors/props/esc's/battery combinations. A must if you want to avoid overloading and destroying your equipment.

Today, i got a this item and then soldering with D-jack.

When i connected between battary and P1 high voltage wattmeter and then display voltage of battary.

Lastly, when i plugged in an ESC and then LCD display was gone...

How can i repair this item?



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Today, i got a this item and then soldering with D-jack.

When i connected between battary and P1 high voltage wattmeter and then display voltage of battary.

Lastly, when i plugged in an ESC and then LCD display was gone...

How can i repair this item?



Fairly accurate wattmeter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fairly accurate wattmeter

The watt meter read the voltage of my battery as 12.75 when actually it was 12.48. I did a manual calibration and did a test run of the motor. When the test finished, it again went off mark. The display is also flimsy. I suggest adding $10 and getting the Watts up meter instead, which has pretty good reviews.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The watt meter read the voltage of my battery as 12.75 when actually it was 12.48. I did a manual calibration and did a test run of the motor. When the test finished, it again went off mark. The display is also flimsy. I suggest adding $10 and getting the Watts up meter instead, which has pretty good reviews.

Good product works as advertised.I make use of the small size and lower(hopefully more accurate) current readings to make a special small motor meter by soldering mini(red) JST plugs to the shortened leads.Very useful for setting up Park and indoor flyers with correct prop etc.I obviously have other meters for normal applications.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product works as advertised.I make use of the small size and lower(hopefully more accurate) current readings to make a special small motor meter by soldering mini(red) JST plugs to the shortened leads.Very useful for setting up Park and indoor flyers with correct prop etc.I obviously have other meters for normal applications.

  1. 1
  2. 2
Customer files
P1 Manual Download [93]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!