Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

P40 Funfighter - EPO 700mm (PNF)

P40 Funfighter - EPO 700mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1462 g
SKU:
P40-PNP

Combine

essential items and
battery
acc
Product
Description

Also, Sie wollen einen schnellen Parkflyern!?
Vergessen Sie langweilige Skala Details und Regal Königin gutes Aussehen dieses P40 auf Geschwindigkeit ausgelegt ist und alle aus Spaß! Hund kämpfen mit Freunden auf 3S oder verwenden Sie ein 4S Pack für Herzklopfen mit hoher Geschwindigkeit passiert, so oder so den Spaß Kämpfer haben Sie abgedeckt. Die Kombination aus geringem Gewicht EPO Zelle, eine hohe Leistung Brushless Motor und einem einfachen Quer- und Höhenruder Setup Ort diese Modelle unter den aufregendsten Park Flyer , den Markt in diesem Jahr zu schlagen. Lassen Sie sich nicht aus dem Spaß gelassen werden!

Dieses Modell kommt Plug-and-fly und erfordert nur wenige Minuten von der Montagezeit und fliegt wie seine auf Schienen durch die Formtechnik ein Stück in der Konstruktion verwendet. Alles , was Sie den P40 in der Luft zu haben , erfordert eine 3 ~ 4S 850mAh 20C Lipo Akku und Ihren eigenen Sender und Empfänger (Tx / Rx)

Specs:
Spannweite: 700 mm
Länge: 540mm
Fluggewicht: 330g
Prop: 5.5x4.5 (3x im Lieferumfang enthalten)
Motor: 2825-1950kv Brushless Läufer - Motor
ESC: 20A [Upgraded Wahr 4S]
Servo: 3 x 8gram

Erforderlich:
850mAh 3 ~ 4S 20C Lipo Akku
4-Kanal-Sender und Empfänger

Hinweis: Für eine wirklich Ballistic Upgrade versuchen , die Turnigy Nano-Tech - 850mAh 4S 45 ~ 90C Lipo - Pack. Siehe die zugehörige Artikel unten.

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    P40-PNP
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    1462.00
  • Länge
    750.00
  • Breite:
    90.00
  • Höhe:
    395.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Wow fast and fast lol seriously great little flyer bit twitchy but its always going to be with its weight and size. I used a turnigy 800mah 35c and has plenty of speed
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ok plane,just dont listen a word to instuctions on weight and balance on this thing.put battery right forward.had more trouble with balance than all my other planes combined(about 7 planes)flown 20 times and had 3 flights over 5 seconds.weght too far bak running turnigy 3s 850ma nanos in it.flys like an angry ferritt but at least it takes a huge amount of punishment.be sure to buy a BIIIG bottle of glue to fix this thing ae.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome speed off zippy compact 1000mAh 35C 3S. Ensure you balance the prop and spinner.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Had first flight today in really windy conditions . Went well . Tried 1300 nano 3 cell battery first . Not a lot of spare room in there . Then tried 850 4 cell and went much much better . Hardly any trimming needed . Factory ESC from my T28 funfighter went in this as all the bullet connectors and xt 60 plug were already attached .Peeled the shrinkwrap of the heatsink and after mixed flying ESC was fairly warm but not as bad as I thought it would be. May make an air scoop ( from half of a KFC spoon, just cut the spoon bit in half , drill hole throgh the fuselage, then glue scoop on over hole ) ) to divert air onto ESC .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A real good plane. Fun to fly with.
fast on 3 cell's. DONT'T FLY 4 CELL'S ON THE STOCK REGULATOR. IT WILL BREAKE !!!
flies verry fast.
a bit tricky to hand launch.
Best practice is to let a partner hand launch it.
a hard push, a bit up is best.
good advice : put dual rate on 40pcnt on for launching. When the plane hase not enough speed it listens verry hard to the airlerons.
Dont fly to slow when landing.
NOT a beginners plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very easy to build, good instructions and with correct cg 32mm behind leaning edge. This plane does not come with XT 60 connecters it comes with bullets. Hand launch is tricky because the plane always wants to roll left (torque from motor). In the air it tracks straight when trimmed out and i fly with a 3s 1300 perfect cg and power and is clocking at least 60 mph. half throttle. Warning: THIS PLANE TIPSTALLS VERY EASILY IN LOW SPEEDS. The plane at less then 1/4 throttle will tipstall coming in for a landing. This is how you should land: make sure you are far away to get slowly low to the ground about 5ft. or1meter off the ground at 1/3 throttle soon cut throttle at about 2 ft. off the ground and it glides in hot but if you have grass it should not be a problem. I have crashed 2 times because of tipstalls but this means I can test how easy the repair is. Its very easy if your motor mount get loose it has epo to guide how much torque you need no counteract thrust. I do recommend to take pics of the motor and torque just in case. Over all you are paying for a very good motor/esc (don't run this on 4s just saying) that are worth at least 80 dollars and if you crash hard you make a scratch build racer:D. I do recommend this product to all experienced pilots but not to new comers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Top Modell fliegt wie Sau der Vogel... mit 4S und 5,5X5,5 nicht zu bremsen ;-) macht einfach nur spa!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Out of the box, both aileron servos were stripped. One completely stripped, the other had a skip in it. I replaced both with HTX900 servos. After the 8th flight, the elevator servo developed a random twitch, causing the plane to go into a loop. So, I changed that servo out to an HTX900, too. I wish HK would sell the Fun Fighters as kits, the components that come with the plane as a PNP are sub par. I also changed out the ESC to a 30 amp. Finally, the plane is dialed in and is a blast to fly. Worth the extra work to get it right!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received mine yesterday,well packaged, and no damage,assembly was easy,and I'm looking fwd to the scare!
Cheers aus hk
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Love this little airplane! It's fast, fun and a handfull to handle: ) I didn't got the recomended cg to work. The manual says 32mm from the leading edge, but my p40 works best at ( strange enough) 15mm from the leading edge! I use the nano-tech 4s 850mha. But anyway, I really like this one!! Just buy it and have the time of your life:)
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • P40 Funfighter - EPO 700mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.