Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

PBY Catalina 1380mm (PNF)

PBY Catalina 1380mm (PNF)

Now save Speichern 0,00 € 0,00 €

100,32 €
Status:
Ausverkauft!
Gewicht:
2487 g
SKU:
CATA607-PNP
WANT FREE SHIPPING? Click here to find out more!

Die Catalina ist wohl das berühmteste Flugboot jemals gebaut wurde und mit Sicherheit eines der am weitesten verbreitete, das Luftfahrt-Symbol sah Service vor und nach dem 2. Weltkrieg sowohl mit der militärischen und zivilen Betreiber. Diese erstaunliche Flugzeug wurde für die Feuerwehr verwendet, U-Boote Jagd, Air Sea Rescue die Liste geht weiter und weiter.

Dies ist eine große Größe Plug N Fly-Modell mit einem sehr niedrigen Flächenbelastung, die ausgeschaltet werden kann Wasser geflogen oder aus Gras, es ist sehr einfach zu fliegen und es won''t die Bank zu sprengen! Sein Plug N Fly, es mit 4 x 9g Servo '' s und 2 x leistungsstarke bürstenlose Motoren & Regler "kommt das, es kommt auch mit allen Verlängerungskabel, y-Leads und sogar ein paralleles Webstuhl für die der 'ESC Verbindungs zu einem einzigen LiPoly. Für Wasser fliegen weg, es gibt ein Wasserruder und Flügel Schwimmer ist, entfernen Sie einfach Gras zu fliegen!

Das Entfernen der magnetischen Vordach entpuppen sie sich eine große Lagenplatte alle Getriebe RC für die Montage und LiPoly fern zu halten von jeder möglichen Wassereintritt ermöglicht die riesige Menge an Baldachin Raum auch für eine große Auswahl an LiPoly Kapazitäten, von so wenig wie 1000mAh bis zu 2200mAh 3s. Dies ist ein fantastisches Preis-Leistungs-Verhältnis Wasserflugzeug, die Stunden Spaß an entweder dem Flugfeld oder fliegen aus Wasser geben wird, wenn Sie noch nie versucht haben, Boote vor dem Fliegen, das ist das Richtige für Sie!

Specs:
Spannweite: 1380mm
Länge: 880mm
Fluggewicht: 850g
Motor: Brushless Outrunner 1300kv x 2
ESC: 25A w / BEC x 2
Servo: 9g x 4

Eingeschlossen sind:
Alle Hardware
Servo Verlängerungskabel & Y-Leads
Werkzeuge
Kleben
4 x Propeller
Anleitung
Wasserrutsche Abziehbilder

Benötigt:
Ihre eigene 4-Kanal-TX / RX
1000Mah 3s ~ 2200mAh 3s Lipo Akku

  • Artikelbezeichnung CATA607-PNP
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 2487.00
  • Länge 1070.00
  • Breite 210.00
  • Höhe 290.00
  • PBY Catalina 1300mm
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Adding to previous : The model is basically well powered and suffers looping on water when taking off .. this can be controlled better by Differential throttles. Simply divide throttle on your Rx and add program line mixing in rudder. This can in fact benefit more than the water rudder.
The props used are 8x5 two bladers and provide more than enough thrust. I am seriously thinking to reduce props down to smaller and use 3 bladers. At present I have 6x4 Gemfans fitted ready to test once water smooths out. I would expect 7x4 3 blade props to be about right. If staying with 2 blades - I would recc'd 7x5 instead of the 8x5. The 8x5 do catch water at times and exaggerate the looping on water.
The ESC's have now been moved into fuselage to avoid the usual wetting out they get up in the nacelles. I have already swapped out 3 ESC's for this reason.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Adding to previous : The model is basically well powered and suffers looping on water when taking off .. this can be controlled better by Differential throttles. Simply divide throttle on your Rx and add program line mixing in rudder. This can in fact benefit more than the water rudder.
The props used are 8x5 two bladers and provide more than enough thrust. I am seriously thinking to reduce props down to smaller and use 3 bladers. At present I have 6x4 Gemfans fitted ready to test once water smooths out. I would expect 7x4 3 blade props to be about right. If staying with 2 blades - I would recc'd 7x5 instead of the 8x5. The 8x5 do catch water at times and exaggerate the looping on water.
The ESC's have now been moved into fuselage to avoid the usual wetting out they get up in the nacelles. I have already swapped out 3 ESC's for this reason.

As others have found ... the ESC's are not the best. I have replaced both now with 30A units and also slightly modified one motor mount which was poorly aligned.
I have had two grub screws fall out of motor mounts even though checked fully tight. They now have blue loctite.
Prop spinners are useless and after one decided to screw up into a ball - removed both and now fly without.
I fly with 1800 to 2250 3s packs and CoG change is only slight.
The tip floats are weak and do not mount securely - so I have pushed cocktail sticks without glue down through wing into the legs to secure upright but not so too much damage will occur.
Water rudder needs sorting to get to work. Initially I accepted this was fixed straight ahead as rudder did not move it ... but then realised that screw thread is not tight enough and top of water rudder binds on fuselage. I partly filled the threaded hole of water rudder and added blue loctite ... wound it back onto the threaded pin so no binding when tight on thread. NOW it turns with rudder fine. Without water rudder this model pirouettes on water too easily.
Motor power is more than enough for flight ... she cruises on 60 - 65pcnt throttle. I have separated throttles so now have differential on motors to give better steerage on water. Any little breeze and she refuses to turn without diff.
Do I like it - yes in the air it is an attention puller. People st

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As others have found ... the ESC's are not the best. I have replaced both now with 30A units and also slightly modified one motor mount which was poorly aligned.
I have had two grub screws fall out of motor mounts even though checked fully tight. They now have blue loctite.
Prop spinners are useless and after one decided to screw up into a ball - removed both and now fly without.
I fly with 1800 to 2250 3s packs and CoG change is only slight.
The tip floats are weak and do not mount securely - so I have pushed cocktail sticks without glue down through wing into the legs to secure upright but not so too much damage will occur.
Water rudder needs sorting to get to work. Initially I accepted this was fixed straight ahead as rudder did not move it ... but then realised that screw thread is not tight enough and top of water rudder binds on fuselage. I partly filled the threaded hole of water rudder and added blue loctite ... wound it back onto the threaded pin so no binding when tight on thread. NOW it turns with rudder fine. Without water rudder this model pirouettes on water too easily.
Motor power is more than enough for flight ... she cruises on 60 - 65pcnt throttle. I have separated throttles so now have differential on motors to give better steerage on water. Any little breeze and she refuses to turn without diff.
Do I like it - yes in the air it is an attention puller. People st

Um Gottes Willen,Hände weg von diesem Modell. So ein grotten schlechtes Modell hatte ich noch nie. Material minder wertig. Servos, eines davon ging erst gar nicht. Die Aufnahme für die Motoren auf einer Seite komplett verzogen. Da streift der Motor fast an der Gondel. Dann wohin mit den Kabeln, die vom Regler ins Modell führen. Kein Platz dafür vorgesehen. Servoabdeckungen passen überhaupt nicht. Die Aufnahme der Tragfläche bekam bei der ersten Landung in hohem Gras einen Riß. Das war eine ganz normale Landung. Ach ja, beim ersten Start ist gleich mal nach ca. 50m ein Motor raus geflogen, usw. usw......

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Um Gottes Willen,Hände weg von diesem Modell. So ein grotten schlechtes Modell hatte ich noch nie. Material minder wertig. Servos, eines davon ging erst gar nicht. Die Aufnahme für die Motoren auf einer Seite komplett verzogen. Da streift der Motor fast an der Gondel. Dann wohin mit den Kabeln, die vom Regler ins Modell führen. Kein Platz dafür vorgesehen. Servoabdeckungen passen überhaupt nicht. Die Aufnahme der Tragfläche bekam bei der ersten Landung in hohem Gras einen Riß. Das war eine ganz normale Landung. Ach ja, beim ersten Start ist gleich mal nach ca. 50m ein Motor raus geflogen, usw. usw......

This plane is far from a PNF. There is a lot to do till it would be able to fly! Unfortunately one ESC and one Servo was broken, so lets see if Hobbyking will send some replacement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is far from a PNF. There is a lot to do till it would be able to fly! Unfortunately one ESC and one Servo was broken, so lets see if Hobbyking will send some replacement.

Excellent bi moteur. Un peu de retouche faire quand on montage. Il faut pas hsiter retoucher les pices fournies afin de prserver la symtrie de l'avion.
Avion extrmement lger (faire attention au bourrasque de vent), trs bonne puissance de moteur. Peut tre lancer la main et atterrir sur le ventre. Si vous choisissez cette option, il faudra renforcer le dessous avec un revtement blanc.
N'hsitez pas non plus changer les hlices pour des Tri pales pour un meilleur effet.

Pour : Trs beau modle, bien quilibr, bonne puissance, lancement la main sans risque

Contre : Beaucoup de peaufinage afin d'avoir un appareil symtrique et bien rgler pour viter les mauvaise surprise / Trs lger.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent bi moteur. Un peu de retouche faire quand on montage. Il faut pas hsiter retoucher les pices fournies afin de prserver la symtrie de l'avion.
Avion extrmement lger (faire attention au bourrasque de vent), trs bonne puissance de moteur. Peut tre lancer la main et atterrir sur le ventre. Si vous choisissez cette option, il faudra renforcer le dessous avec un revtement blanc.
N'hsitez pas non plus changer les hlices pour des Tri pales pour un meilleur effet.

Pour : Trs beau modle, bien quilibr, bonne puissance, lancement la main sans risque

Contre : Beaucoup de peaufinage afin d'avoir un appareil symtrique et bien rgler pour viter les mauvaise surprise / Trs lger.

Just took it out for maiden flight, flying around ok until the wing snapped and crashed.
Lasted about 5 mins, if you buy one of these strengthen the wing or it will go the same way as mine, in the dustbin, I would not buy another.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just took it out for maiden flight, flying around ok until the wing snapped and crashed.
Lasted about 5 mins, if you buy one of these strengthen the wing or it will go the same way as mine, in the dustbin, I would not buy another.

veramente pessimo! il materiale si sbriciola solo a guardarlo! la prima volta che sono atterrato non proprio dolcemente si distrutta la fusoliera! Ripeto nessun crash ma atterraggio brusco sull'acqua e il modello si distrutto. Non PNF infatti devi montare servi, motori ed esc che non hanno una sede nemmeno per i cablaggi e nemmeno compaiono nelle istruzioni.
Sconsigliato

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

veramente pessimo! il materiale si sbriciola solo a guardarlo! la prima volta che sono atterrato non proprio dolcemente si distrutta la fusoliera! Ripeto nessun crash ma atterraggio brusco sull'acqua e il modello si distrutto. Non PNF infatti devi montare servi, motori ed esc che non hanno una sede nemmeno per i cablaggi e nemmeno compaiono nelle istruzioni.
Sconsigliato

Nice plane, Your getting what you pay for so just be aware that you will need to beef up and make some minor modifications to ensure many flights. WATERPROOFING, SEALING, I'm not a fan of the type of foam being used on this plane. ITs of a more brittle type of foam.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice plane, Your getting what you pay for so just be aware that you will need to beef up and make some minor modifications to ensure many flights. WATERPROOFING, SEALING, I'm not a fan of the type of foam being used on this plane. ITs of a more brittle type of foam.

Recived this last Tuesday have been dying it all weekend about twenty flights
Great no problem flying it of a grass strip.really enjoyable so easy to fly lands like a dream .
Loks good in the air and does not mind a bit of wind .Value for money.
Loved it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Recived this last Tuesday have been dying it all weekend about twenty flights
Great no problem flying it of a grass strip.really enjoyable so easy to fly lands like a dream .
Loks good in the air and does not mind a bit of wind .Value for money.
Loved it

Esc:s are BAD mine where DOA.
I put new escs on place and it worked wery nicely.
It tends to fall on its wing but swims great and gets to air very easily.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Esc:s are BAD mine where DOA.
I put new escs on place and it worked wery nicely.
It tends to fall on its wing but swims great and gets to air very easily.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
Black Jack Shelack Download [339]
Black Cat 1 Download [342]
No File Name Download [124]
No File Name Download [124]
No File Name Download [378]
Servo Mounting Download [72]
Receiver and Servo Mounting Download [185]
No File Name Download [1810]
RAF PBY Bomb Drop Download [43]
RAF PBY Low Pass Download [70]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save