Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren

Q Gehirn 4 x 25A Brushless Quadcopter ESC 2-4S 3A SBEC

Q Gehirn 4 x 25A Brushless Quadcopter ESC 2-4S 3A SBEC

Now save Speichern 0,00 € 0,00 €

28,61 €
Ausverkauft!
Stock:
OUT OF STOCK
Gewicht:
147 g
SKU:
9020000007-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Description

Der Q-Gehirn bietet die perfekte Power-Lösung für Ihre quadcopter durch den Einbau von 4 x 25A WSR in einer einzigen Einheit. Dies hält die Verdrahtung sehr ordentlich und ermöglicht es Ihnen, dieses Gerät in der Mitte des Rahmens zu montieren, anstatt an jedem Arm eine ESC zu montieren ist.

Mit einstellbarer Unterspannungsschutz, Startmodus und Motortiming, ist die Q Gehirn auf Programmfunktionen nicht kurz. Dies und seine Fähigkeit, auf 2 ~ 4S LiPoly oder 5 ~ 12 Zellen Ni-XX macht es zu einem sehr vielseitig ESC zu bedienen.

Der Q-Gehirn hält die Dinge einfach von allen des Motors führt vorinstalliert und beendet mit 3,5-mm-Kugel-Anschlüsse aufweist. Es gibt 4 x Signalleitungen (eine mit Leistung), die direkt in Ihren Flug Controller ESC Ausgangsanschlüsse stecken wird. Ein Drossel Nabe ist auch für den Einsatz in Anwendungen, bei denen die Verwendung eines gemeinsamen Gassignal enthalten.

Jetzt Versand mit OneShot125.
Einige Bestände können verlangen, ESC, um OneShot125 über Flash-Tool in den entsprechenden Artikel verwiesen zu blinken

Eigenschaften:
• Praktische All-in-One-ESC-Design
• 4 x 25A Ausgangs
• Einstellbarer Niederspannungs-Schutz
• Vollständig programmierbar

Specs:
Eingangsspannung: 7,4 ~ 14,8 V (2 ~ 4S LiPoly)
Cont. Strom: 25A x 4
Burst - Strom (10 sec): 30A x 4
BEC Typ: Schalt
BEC Ausgang: 5.25V@3A
Motorkabellänge: 250mm
Abmessungen: 69x62x11mm
Gewicht: 112 g

* Hinweis: Dieser ESC ist kompatibel mit dem Turnigy BESC Programmierkarte (separat erhältlich). Bitte siehe verwandte Artikel unten.

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    9020000007-0
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    147.00
  • Länge
    120.00
  • Breite:
    20.00
  • Höhe:
    100.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Terry, it is common for this type of component to come without a connector, as there are so many out there, and the end user can simply solder on the connector of his/her choice. Far more versatile this way.

I've added an XT60, as that's what all my batteries are (I started with a Nova), and just spun up my Quanum XJ470 with this board, and it seems to work great! After a few minutes of the maiden flight, she wasn't even all that warm, but we'll see what changes when I start flying with a payload (camera, etc.)
Quality
Value
Overall
Quality
Value
Overall
Die Kabel sind lang genug selbst für einen 500er Quad.
Quality
Value
Overall
Quality
Value
Overall
Perfect solution to making a clean looking well balanced quad. No need for power distribution board. Have really pushed these q brains and they are awesome. Using 4 1000kv motors with 10x45 props no real heat build up at all if air can circulate around them. Give them room to breath and you shouldn't have problems. Motor setup is a little confusing for some flight controllers but easy to configure. May have to extend wires for bigger frames ie 600 size plus. Once installed on frame and configured with flight controller you should never have to worry again. Used these on a 450 qaud and 600 quad with extended wires. Have never let me down with over 40 hours use on each. Wish I could say the same for the batteries I bought at same time. Just to sum up clean set up and decent 2200 mah 30c battery 1000kv motors 10x45 props. 10 minutes of solid flying time. What more do you need besides more batteries lol
Quality
Value
Overall
Quality
Value
Overall
a bit bulky, i was saving it for a larger build but went with a cheaper plastic frame and larger motors and it flew nice.
Quality
Value
Overall
Quality
Value
Overall
I have used the Qbrain 12A and now I m putting a Q330 quad so I m gonna try this 25A on it. This is a great ESC.
Quality
Value
Overall
Quality
Value
Overall
Works for Tricopters too. Only slight niggle was that two motor leads were 35mm too short, but made up short extensions and all appears OK. The BEC system works fine and gives a perfectly normal 5.25v but this appears to be enough to destroy small digital servos, so if you are using it for a Tricopter, use analogue servos. Other than that this is a neat and economical unit for a small multirotor
Quality
Value
Overall
Quality
Value
Overall
I really like this ESC. It simplifies everything and fits nicely. I'm running a pair of them in an X8 with a simple power splitter cable between them.
Quality
Value
Overall
Quality
Value
Overall
Very good ESC , I use it with my quad size 450 , DJI Outrunner 920kv and 3S 5000mAh 20C battery . Care should be taken to cooling ESC , to provide the necessary air flow.
Quality
Value
Overall
Quality
Value
Overall
This is my favorite ESC for quad copters. No need for a distribution board. Nice and neat. Works great on 3 or 4S. I have 4 of them on copters with some serious time and no failures.
Quality
Value
Overall
Quality
Value
Overall
Squeezed this into my S500 frame custom quadcopter and had no problems with it so far. Great way to tidy your quadcopter up.
Quality
Value
Overall
View all reviews
Upload
Videos
  • HK Q Brain 25A ESC

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.