Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Quanum GoPro Brushless Gimbal mit Quick Release

Quanum GoPro Brushless Gimbal mit Quick Release

Discontinued Product

Please continue searching for a similar product.
Gewicht:
427 g
SKU:
9387000038-0
WANT FREE SHIPPING? Click here to find out more!

Quanum hat einen Blick auf alle Action-Cam kardanisch genommen und machte sich auf ein neues Design zu verfeinern, eine bessere Leistung und Benutzerfreundlichkeit bieten.

Der neue Quanum GoPro Gimbal begann mit einem 4 Mount-Kompression Stil Isolation Design, die eine bessere Leistung und Sicherheit über den hängenden Stil-System bietet. Die untere Kohlenstoff Montageplatte Häuser, die 2-Achsen-Voreingestelltes Kardan-Controller und standardisierte 45mm Montagepfosten. Der Tragrahmen ist alle CNC-gefräste Aluminium für Stärke und geringes Gewicht. Der Rahmen nutzt integrierte 2208 Brushless-Kardan-Motoren bietet ultraglatte Stabilisierung. Eines der besten Features des Quanum GoPro Gimbal ist die GoPro Halterung, einen einfachen Zugang zu den Häfen und SD-Karte bietet. Es gibt zwei Befestigungsmöglichkeiten für die GoPro, eine CNC-Schraube am Haltering oder eine schnelle Freisetzung O-Ring-Stil.

Die Quanum GoPro Gimbal bringt ein neues Maß an Qualität und Funktion der GoPro Markt zu einem unschlagbaren Preis.

Eigenschaften:
• Kompression Stil Schwingungsisolierung
• Schnell GoPro Montage
• Pre-tuned und einrichten
• CNC Aluminiumrahmen
• Leicht
• Zwei Montagemöglichkeiten
• Einstellbare Tonhöhe über einen RC-Kanal

Specs:
Größe: 83x90x100mm
Gewicht: 198 g
Betriebsspannung: 2 ~ 4s 7.2 ~ 16V
Motorgröße: 2208
Kamera - Kompatibilität: GoPro 3 - Serie und kompatible

  • Artikelbezeichnung 9387000038-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 427.00
  • Länge 180.00
  • Breite 90.00
  • Höhe 140.00
  • Quanum Brushless Gimbal
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great functioning gimbal EXCEPT for two things:

this has an HMBGC v1.01 board which is KNOWN to have faulty/very poor quality 3.3v and 5v rails which will blow out when there is too much resistance on the motors while running at 12 volts. Loads of people have these boards fry because of it, so HK please use something worth more than 8 dollars.

ALSO, the motor mounts are really poorly designed and will break after time because of poor/small size bolts holding too much weight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great functioning gimbal EXCEPT for two things:

this has an HMBGC v1.01 board which is KNOWN to have faulty/very poor quality 3.3v and 5v rails which will blow out when there is too much resistance on the motors while running at 12 volts. Loads of people have these boards fry because of it, so HK please use something worth more than 8 dollars.

ALSO, the motor mounts are really poorly designed and will break after time because of poor/small size bolts holding too much weight.

I received mine from the international warehouse yesterday. One of the motors was locked up and sure enough when I powered it up, only the one axis worked. I'm not about to return this because I'll be waiting two months to get a replacement. What kind of quality control does Hobbyking have, apparently none. If Hobbyking makes this right, I will remove this review. I order a ton of stuff from them, but this is ridiculous. I'll be looking elsewhere for items now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received mine from the international warehouse yesterday. One of the motors was locked up and sure enough when I powered it up, only the one axis worked. I'm not about to return this because I'll be waiting two months to get a replacement. What kind of quality control does Hobbyking have, apparently none. If Hobbyking makes this right, I will remove this review. I order a ton of stuff from them, but this is ridiculous. I'll be looking elsewhere for items now.

Well if there was support available it might be a decent gimbal. Mine vibrates and is a little off axis in the roll. It also will not allow to tilt strait down. No instructions any where to be found.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well if there was support available it might be a decent gimbal. Mine vibrates and is a little off axis in the roll. It also will not allow to tilt strait down. No instructions any where to be found.

i looks very good but when i make the gopro to face down the gimbal will not work well and it will vibrate alot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i looks very good but when i make the gopro to face down the gimbal will not work well and it will vibrate alot

Strong vibrations from the engines and abnormal movement of the axes.

Really very unhappy, terrible!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Strong vibrations from the engines and abnormal movement of the axes.

Really very unhappy, terrible!

I ordered two of these gimbals and both had faults. The first one I ordered, the control board burnt out while using a 3S battery. The gimbal was functioning well for about 5 minutes before the control board stopped working.
The second gimbal I ordered had a faulty pitch axis that would vibrate and not stabilize. I've given up on this gimbal and I will try another brand.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered two of these gimbals and both had faults. The first one I ordered, the control board burnt out while using a 3S battery. The gimbal was functioning well for about 5 minutes before the control board stopped working.
The second gimbal I ordered had a faulty pitch axis that would vibrate and not stabilize. I've given up on this gimbal and I will try another brand.

I haven't had mine in the air yet, but it works fine when testing it on the ground. My problem is that the pitch control from RC is very slow and won't tilt more than -45 degrees. I want -90 degrees. My setup is FrSky Taranis with 2 X8R one for the hex operation and one for camera operation. For pitch control I've selected switch RS and channel 9. What GUI should I use to access the controller board?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I haven't had mine in the air yet, but it works fine when testing it on the ground. My problem is that the pitch control from RC is very slow and won't tilt more than -45 degrees. I want -90 degrees. My setup is FrSky Taranis with 2 X8R one for the hex operation and one for camera operation. For pitch control I've selected switch RS and channel 9. What GUI should I use to access the controller board?

I've been using it for a few days and am happy with it. I wrote a short review at Flitetest in the forum. I'm still paranoid about using anything but 2S. Here's the link.

//forum.flitetest.com/forumdisplay.php?109-Electric-Multirotors

(put http in front)

However, if the link doesn't well , it can be found in the electric multirotor section in the forum.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've been using it for a few days and am happy with it. I wrote a short review at Flitetest in the forum. I'm still paranoid about using anything but 2S. Here's the link.

//forum.flitetest.com/forumdisplay.php?109-Electric-Multirotors

(put http in front)

However, if the link doesn't well , it can be found in the electric multirotor section in the forum.

I just mounted this gimbal on my Turnigy Hex. The mounting was not very level hence the tilt in the video (see video). The GoPro is a breeze to put on and take off for charging, card access, etc.. The only downside to this gimbal is a lack of hook-and-rod mounting options.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just mounted this gimbal on my Turnigy Hex. The mounting was not very level hence the tilt in the video (see video). The GoPro is a breeze to put on and take off for charging, card access, etc.. The only downside to this gimbal is a lack of hook-and-rod mounting options.

Customer files
SimpleBGC_2_2b2.null Download [86]
TBS DISCOVERY + Quanum GoPro 2D Gimbal Download [109]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save