Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Quanum NEON 250 Carbon-Rennrahmen Kit mit LEDs

Generating Links

Quanum NEON 250 Carbon-Rennrahmen Kit mit LEDs

Preis:

Now save speichern 0,00 € 0,00 €

42,02 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9323000077-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Die Quanum NEON ist die Entwicklung der 250-Klasse FPV Rennen Hardware. Die NEON enthält alle Notwendigkeiten, Luxus und Wahnsinn Sie jemals in einem super dauerhaften Vollcarbon Rennen Exoskelett wünschen kann.

Der Neon Hat Cyborg sieht Trend weg von den mittleren Platte gestapelt Rahmen der letzten Saison. Und ein niedrigeres Profil hinzufügt, während Stärke CG Masse für gestochen scharfe Kontrolle zu verbessern.

Der Neon wurde für den Rennsport gebaut und von Anfang an für eine lange Lebensdauer konstruiert, aus Vollcarbon gefertigt, werden die Stapel dicht nebeneinander montiert mit reichlich CNC-Hardware, so dass diese eine fliegende Festung ... Mit komplett geschlossenen Motorschutz und Batteriefach. Alle Komponenten sind intern für volle Exoskelett Schutz vor den härtesten Hits untergebracht. Die Vorder- und Rückseite sind bereift CNC Diffusoren LED für eine Neonart gut um den Kurs Zoomen glühen. Die Front trägt eine in Rahmen FPV Kamera bis zu 30 mm. Die Rahmenstapel werden bei nur 10mm für Torsionsfestigkeit Abstand aber lässt viel Raum für ESC, FC, FPV Ausrüstung und vieles mehr.

Die Quanum NEON ist ein Show-Stopper auf Aussehen, Qualität, Langlebigkeit und FPV Insanity.

Eigenschaften:
• Vorder- und Hinter CNC LED-Diffusoren für eine Neonglüheneffekt
• Kohleplattenkonstruktion mit Low Profile Exoskelett Stärke
• Geschützte Motor Arm-Design und Batteriefach
• Große Auswahl an Motoren und Requisiten bis 22 Serie und 6inch Requisiten
• CNC-Hardware für Gewichtseinsparungen

Specs:
Radstand: 250 mm
Gewicht: 155g
Motoren: 1806 ~ 2206 (12 ~ 19mm Montage)
Requisiten: 5 ~ 6 Zoll
ESC: 10 ~ 20A
FPV Cam: bis 31x13mm
LED: Blau Front Rote Heck

Erforderlich:
4 x Motors 1806 ~ 2208
1 x Batterie 800 ~ 1500mAh 2 ~ 4s
4 x Propellers bis 6in
4 x WSA 10 ~ 20A
1 x Multirotor-Flugregler
4-Kanal-Radio (6-Kanal empfohlen für FPV und FC Verwendung)
FPV Getriebe (optional)

  • Quanum Neon 250 Frame Kit----
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

tim | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2016

This frame looks great. But it's weak and breaks very easily. I bought two.... both are now trash. Pretty disappointed with my purchase, enough so that I have come back here to write this review warning others.

This frame has potential... but the design is such that cutouts in the base plate mean that the front arms are only attached by a couple of mm2 of material. The top plate only attaches to the front arms by one screw.

If you plan on using your quad purely for photography at minimal risk of crashing, then this frame will make it look badass.

Bartomiej | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2015

Great design. Good fit. Sadly you can't buy spare spacers, only screws. Original LED strips are not dense enough. only got 3 LEDs. It's not full carbon laminat. Inside it has glass fiber. only on top, and bottom there is carbon fiber. Big mistake is week nose section, because two forearms are hanging only on few milimeters of plate, which is main reason of destruction. You need to add your own carbon structure or something. Laminat is 1,2 mm thick, which would be great, if it was full carbon, now it's a bit weak. After all I think, that's more for the look, but it isn't bad product.

ulf | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2015

Generally a nice frame, but probably not suitable for fpv-racing. It cant even take a slow fall on grass, without breaking and shearing off screws.
Cannot recommend.

Reinis | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 21, 2015

Although this in very nice looking frame but its design is poor. I would even go as far as to claim that frame is made weak with intention! If you look at lower frame - notice that front of it is connected to whole frame with just two weak and thin carbon lines. I can not find other reason than intention to make this frame break for this poor design. Obviously - after crash front simply broke off.. And.. there are no spare parts available for this frame...

ad_wing | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 08, 2015

Quad perfeito para indoor noturno. Fica muito bonito.

Erwin | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates. It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource. I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate, Hobbyking should make a version off this kit with plates that are twice as thick as this one , beside that it is a great frame to fly and it looks really great in the air.

Erwin | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates.
It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource.
I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate,
Hobbyking should make a version off this kit with plates that are twice as thick as this one beside that it is a great frame to fly and it looks really great in the air.

|TAB| | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 01, 2015

nice and strong, enough space for everything

mrlee03 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2015

After reading stories about how weak this frame is i still ordered one as it looks fantastic, i have been flying it now for over a month and had my first big crash with it today (lost orientation) 20-25 metre freefall and hit the ground nose first at 45 degrees. im delighted to say that it survived with minimal damage. the battery tray screws have bent slightly and that is all.

Great value
Great looking
Fun to build
Would recomend this to everybody, Everybody needs a neon 250 at least once.


However i would not advise this frame for close proximity racing (woods, abandoned building etc etc) only because it is highly likely that this frame will break in hardcore racing and crashing circumstances.

BOSS302 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2015

for the FUN Factor it is good !! but if starting out? might be disappointed? not in a bad way? but it is a little geared if you been flying a little bit? this out of the way if your skills are good to Novice not a bad FRAME! this is one of my "Personal Favorates" now with the Superior CC3D Controller it has a Somewhat "Predictable Feel" and I use it for my FPV racing and just having fun thing, the I highly recommend NOT getting the KK-Mini board! of 3 we tried it did not like this "Frame"???? and the KK bigger one will NOT FIT it "Can" but probably not how 99.999999pcnt would like to fit, get the
"Superior NAZE or CC3D boards" and "SMALL" 12a ESC's ,I now have 3 and there my "GO TO" ones for just fun fly !! but starting out? this may not be for you? but good to have for when you feel more confident in skills !!

  1. 1
  2. 2
  3. 3
Kundendateien
No File Name Download [256]
Factory LEDs Download [512]
Factory LEDs Download [600]
Factory LEDs Download [797]
Factory LEDs-off Download [897]
Factory LEDs-off Download [857]
Complete no Fpv Download [2281]
ESC Wiring Download [2776]
Modification 1 Download [239]
Modification 2 Download [252]
  1. 1
  2. 2
  3. 3
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör