Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Quanum Q-3D-Brushless 3-Achsen Kameraausrichtung (geeignet für Nova, Scout X4, Phantom, QR X350 etc.)

Generating Links

Quanum Q-3D-Brushless 3-Achsen Kameraausrichtung (geeignet für Nova, Scout X4, Phantom, QR X350 etc.)

Preis:

Now save speichern 111,25 € 111,25 €

Special Price 50,95 € 50,95 €

You save speichern 111,25 € 111,25 €

Was  162,20 €

Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9198000389-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der neue Quanum Q-3D ist eine hohe Leistung, 3-Achsen bürstenlose Kamera Gimbal, die für die Verwendung mit den GoPro Hero 3 und Quanum FPV + Kameras auf 350 ~ 500 Größe Multirotor-Modelle (wie zB die Quanum Nova, Scout X400 konzipiert Tali H500, QR X350 PRO und DJI Phantom).

Wenn es zu einer großen Antenne Videoplattform kommt, sind ein paar Dinge Schlüssel; Design, Größe, Gewicht und Leistung. Die Q-3D ist ein Entwurf, der für die richtige Integration von Anfang an optimiert wurde, auf Größe und Gewicht zu sparen und der voreingestellten Controller wie Sie es von Quanum erwarten würde, durchführt.

Der Q-3D ist eine der kleinsten und leichtesten 3-Achsen brushless kardanisch auf dem Markt. Mit nur 110 mm hoch, kann es die meisten Multirotor-Landekufen löschen und wiegt nur 185g, ideal für 350 ~ 500 große Multi-Rotoren. Sowohl Pitch und Roll on the fly aus einem R / C-Kanal eingestellt werden und verfügt über einen großen Betriebsspannungsbereich von bis zu 28 Volt.

Die Q-3D wird ab Werk vorgestimmt, keine Einstellung erforderlich ist, einfach Schraube auf der Unterseite des Quanum Nova, Scout X4, QR X350 PRO oder DJI Phantom, installieren Sie Ihre GoPro Hero 3 / Quanum FPV + Kamera und du bist bereit, professionelle stabilisierte Antenne Video zu schießen!

Eigenschaften:
• Leicht und duable Aluminium-Konstruktion
• Kompakte Größe
• Anpassung an die meisten 350 ~ 500 Größe Multirotor-Modelle (direkte fit für Nova, Scout X4, TALI H500, QR X350 PRO und DJI Phantom)
• Pitch und Roll-Steuereingänge
• Unterstützung für die GoPro Hero 3 Video Aux-Ausgang
• Sehr große Eingangsspannungsunterstützung (7,4 ~ 28V)
• Versorgungsspannung Verpolungsschutz und Spannungskompensation
• Motorantriebsseite Kurzschlussschutz
• Anfangssteigungswinkel
• Empfindlichkeit Parameter Einstellung

Specs:
Betriebsspannung: DC 7.4V ~ 28V (12V empfohlen, 3S Li-Po - Akku)
Betriebsstrom: 500mA ~ 600mA (abhängig von der Spannung versorgt und Motorleistung)
Betriebstemperatur: -15 ° C ~ 65 ° C
Sensor: 3-Achsen - MEMS - Kreisel und 3-Achsen - MEMS - Beschleunigungsmesser
Regelgenauigkeit: 0,02 °
Winkelregelbereich: -135 ° ~ 90 ° (Neigung); -45 ° ~ 45 ° (Rolle)
Anwendbar Kamera: iLook / iLook + / GoPro Serie / Tunigy ActionCam
Gewicht: 188 g (ohne Kamera)
Dimension: 114.3x97.5x106.6mm
Box Dimension: 150x127x98mm

  • Quanum Q-3D 3 Axis Gimbal
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Ian | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Walkera replacement, Great price and quality matched

Mar 31, 2018

Having point blank refused to pay prices being asked for the Walkera G-3D came across this Quanum Q-3D as a straight swap. So far, as I only received it a day ago it's connected and works perfect. Quality appears to match as identical. I did have to use my existing Tali H500 power input/data con ribbon cable which was not supplied with the Quanum. Great service and terrific delivery time. Ordered Monday and arrived via DHL on Thursday.

Alan | Verifizierter Käufer

  • Overall
  • Quality
  • Value

I mean, it works...?

Nov 23, 2016

While this thing is cheap, I think it's borderline lying trying to call it a 3 axis gimbal when one of the axis is not controllable from a transmitter. That is a minor annoyance compared to the power this thing pulls versus what the documentation says. The documentation states a power draw a bit over half an amp. I have tested this thing and it pulls twice that during normal operation and with NO vibration of any kind affecting it. I have to get a bigger regulator just to feed this thing while it sits on my quad.

Robert | Verifizierter Käufer

  • Overall
  • Quality
  • Value

So so

Nov 01, 2016

Ok given it's just a Walkera G-3D etc you'd think that Hobbyking would A. Release the USB tool and B. The firmware that Walkera did to move roll - yaw. You'd also presume that they'd have bothered to 'check' their product given the 'Passed' Sticker on it right? Nope missnig the counter weight in my box, also noticed that the yaw axis has not been properly calibrated sits 3-8 degree's off axis..

For the price Hobbyking it's a poor effort. You can buy better, more functional gimbals cheaper!

miki | Verifizierter Käufer

  • Overall
  • Quality
  • Value

quanum 3d

Nov 01, 2016

no recomiendo este gimbal , antes de comprar mirar otra opcion , es imposible de ajustar . por otra parte ahora esta muuuuyyyyy caro , ojo !!!!

miguel | Verifizierter Käufer

  • Overall
  • Quality
  • Value

quanum 3d

Oct 30, 2016


This gimbal is crap, is deprogrammed every time I turn it on, I have to set the gains in each flight, and also now worth $ 316.77 a lot, in the market there are other better and much cheaper. I not recommend it, unless you want to problems do not buy it.

miguel | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2016


This gimbal is crap, is deprogrammed every time I turn it on, I have to set the gains in each flight, and also now worth $ 316.77 a lot, in the market there are other better and much cheaper. I not recommend it, unless you want to problems do not buy it.

miguel | Verifizierter Käufer

  • Overall
  • Quality
  • Value

quanum 3d

Oct 30, 2016


I think they have gone mad, this gimbal is not so good to be worth $ 316.77. In the international market exinten other better and not worth much.

Kris | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2016

I want to be as honest as possible with this review. Overall, this gimbal was poorly designed from the start and has several issues.

It's designed to work with GoPro's and I have a Hero3. However, due to the placement of the camera, attaching a USB AV cable is difficult to say the least.

You cannot not control yaw via an RC channel, but I was aware of this when I bought it. It's a minor inconvenience for me, but a bigger problem is how if you want to control pitch via an RC channel, you must also use another channel for roll stabilization. You cannot control just pitch as the roll channel floats and then eventually drifts. That is a pain.

Third, if you plan to use a different camera or add a filter, you must change power and gain settings every time you power up. Apparently, my gimbal does not save settings after I set them. Unfortunately, you would hope there was an easy USB connector to adjust settings via your computer, but you must buy a proprietary adaptor to do so. Why do this at all?

Fourth, vibration isolation to prevent camera jello is sub-par. Decent experimentation is needed even on a fully balanced rig.

Overall, I cannot recommend this gimbal despite it's low price. It's finicky and just wasn't properly designed to "make sense".

miguel | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2016

TENGAN MUCHO CUIDADO CON LA POLITICA DE PRECIOS DE LA MARCA HOBBYKING
HOY TIENEN UN PRECIO Y MAÑANA OTRO , ES INDICNANTE .
TENGAN MUCHO CUIDADO CON ESTOS SEÑORES , PARA MI SON UNOS INCONPETENTES!

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 02, 2016

This product is purchased in order to use the camera for fpv.

There are a lot of expectations.

  1. 1
  2. 2
  3. 3
Kundendateien
manual Download [2915]
No File Name Download [1783]
No File Name Download [1214]
Wiring for CX20 Download [1783]
Wiring for CX20 Download [1783]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!