RADIOMASTER TX16S MKII 4-in-1 Multi-protocol 16ch FCC 2.4GHz RC Transmitter w/V4.0 Hall Gimbals

The best just got better, the RADIOMASTER TX16S MKII is the ultimate open-source radio. It is still a high-end, low-cost, premium multi-protocol radio that has great features and will allow you to fly or use a countless number of RC products. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, redesigned battery cover, and improved knobs and sliders that are smoother with a better center ident.

The TX16S MKII transmitter supports EdgeTX and OpenTX open source firmware which is fully supported by the OpenTX development team. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. The TX16S MKII is available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

There is a module slot in the back of the transmitter which will accept the popular JR/FrSky/TBS Crossfire type of module which means you can be up and running almost instantly with your favorite protocols. There is no need to remove the external module if you have one plugged in as the TX16S can be switched easily between the internal RF and the external RF. The transmitter is also Mode selectable so it can be either Mode 1 or Mode 2, this does, however, require the back being removed to move some mechanical components from one stick unit to the other.

The supplied battery tray will accept either 2 x 3.7V 18650 Lithium-Ion batteries or 2 x 3.7V LiPo batteries. The large battery compartment (97x52x25mm) also has room for a 2S LiPo pack of your choice. A nice feature of this radio is that the batteries can stay in the compartment and be charged via the USB-C charging port. Another improvement of the MKII is that it now allows for charge rates of up to 2.2A. Other ports include a new 3.5mm audio jack, 3.5mm TRS trainer socket, a USB data port, SD card slot, and 2 UART ports to expand the capabilities of the radio.

Overall this improved MKII version is an easy-to-use, multi-protocol transmitter that removes the need for you to have lots of different types of transmitters at your disposal. This one unit will operate just about all the different protocols on the market today.

Features:
• Internal 4-in-1 multi-protocol RF system
• Supports EdgeTX and OpenTX (EdgeTX is installed by default)
• Supports telemetry (protocol and receiver dependent)
• 16 model memories (can be expanded with SD card)
• Accepts JR/FrSky/TBS Crossfire style modules
• Available in FCC and EU LBT versions (see specs)
• V4.0 Hall sensor gimbals for superior centering

Specs:
Type: RADIOMASTER TX16S MKII 4-in-1 Multi-protocol 16ch FCC 2.4GHz RC Transmitter w/V4.0 Hall Gimbals
Transmission Frequency: 2.400~2.480GHz
No of Channels: 16 (receiver dependent)
Internal RF Module: 4-in-1 FCC multi-protocol (CC2500/CYRF6936/A7105/NRF2401)
External Module Slot: JR/FrySky/TBS Crossfire
Modes: Modes 1~2 (selectable)
Model Memories: 16 (expandable with SD card)
Compatibility: EdgeTX and OpenTX (EdgeTX installed as default)
Antenna Gain: 2db (transmit power adjustable)
Screen: 4.3" color, daylight readable
Gimbals: V4.0 Hall sensor
Speakers: Built-in dual speakers
UART Ports: 2
Upgrade Method: USB-C (online) / SD card (offline)
Input Voltage: 6.6~8.4V DC
Working Current: 400mAh (excluding external module)
Battery Compartment: 97x52x25mm
Dimensions: 287x129x84mm
Weight: 750g (excluding batteries)

Includes:
1 x RADIOMASTER TX16S MKII 4-in-1 Multi-protocol 16ch FCC 2.4GHz RC Transmitter w/V4.0 Hall Gimbals
1 x 18650 Lithium-Ion battery tray
1 x USB-C charge/data lead
1 x Screen protector
1 x Pair of flat hand grips
1 x Pair of raised hand grips (fitted to TX as default)
1 x TX16S key chain

Please note: A copy of the User Manual is available under the "Manuals/Files" tab.