RC Hochsee - Racing Yacht 2.2m
Mit ihm ist riesig Segel und hellen Farben ist dies eine sehr auffällige und schnelle R / C Yacht.
Alle erforderlichen Elemente installiert sind, einschließlich Großsegel Winde, Lenkservo und alle Tauwerk, Segel und Hardware. Alles, was Sie tun müssen, ist Ihre eigenen Empfänger und Akku hinzuzufügen!
Bootsrumpf basiert vollständig auf einem Ozeanrennyacht zu gehen und in Fiberglas mit einem perfekten Gelcoat und Emaille lackiert geformt.
Nicht verwechselt in der Annahme, diese Boote sind langsam und boaring. In einer steifen Brise können sie extrem schnell sein und Wendungen schnell ausführen, erweist sich als sehr spannend zu werden.Spec.Länge: 1000 mmHöhe: 2200 mmGewicht: 3565gDie Umgebung von Sails: 0.52m2Ballastgewicht: 1,3 kgWassertiefe: 50 cm +Entwurf von der Wasserlinie bis zum unteren Kiel: 400mm
Rig Höhe vom Deck an die Spitze des Mastes: 1110mmErforderlich.
Radio System (2-Kanal)
Empfängerakku.Hinweis: Bitte stellen Sie sicher, den Kiel Ballast 1,3 kg oder schwerer zu füllen. Bleischrot, Lager oder Schrauben / Muttern ausreichend. Halten sie an Ort und Stelle mit Epoxidharz.
Kapazität ( mAh)
Gewicht ( g)
Schreiben Sie Ihr eigenes ReviewBoot kam mit abgefallenen Einbauen, Haken löste sich auch gleich. Oberflächen innen kein Untergrund für Befestigungen, Kielschwert wakelig, Ruder auch. Äußere Oberflächen super. Gute Ideen im Boot! Einfache Verstellmöglichkeiten am Segel. Segelfläche = IOM
also 0,6 m². Kielgewicht zu klein, nur Platz für 1,65 kg Bleischrot. Schwerer Bootskörper trägt aber nicht mehr. Also nur für wenig Wind. Segelwinde ist Mist, nach zwei Schlägen
sprang die Großschot von der Spule, weil Kapsel nicht eng anliegt. Boot lief trotzdem am Wind zurück zu Steg. Ist ein schöner Rundspanter mit gutem Wasserablauf. Kann aber wohl mit Regatta IOMs nicht mithalten. Käufer sollte etwas Erfahrung haben- für Reparaturen und Tuning, wie Ersatz der Litze im Vorlieg des Groß. Fazig: Boot ist
konkurrenzlos günstigI hope that this follow-up to my previous review is fair warning. After the maiden sailing, (which was a real pleasure not only because it was my first ever RC yachting experience), I noticed some slop in the keel fitting. I put it down to 'bedding in', and so, adjusted the nut on deck, to secure it. My next outing resulted in a recurrence of the same. Having an engineering background, I realised that something other than the nut slackening off was amiss. The third outing resulted in more of the same, with the keel being looser than the previous times. A not so strenuous pull on the keel resulted in it parting from the securing rod completely. Wonderful!!! I WOULD NOT ADVISE BUYING THIS MODELAfter receiving the first boat with a broken hull, I ordered this boat anew (before it would be on backorder). Everything fine with the new boat. Quick assembly. Everything in good shape, great hull. Moving parts dont work precisely, but for that price it is very acceptable. Had it in the water once. Great fun. The biggest replacement what I will do: put a new buld on it with 2KG at least. The boat - due to its height - puts itself aside very fast in gusts. Some more modifications will follow.
Would always buy this boat again.Very fast delivery from the EU warehouse (except for the GLS guy, who dropped the parcel in a far away post shop, pretending he did a delivery attempt - this happened twice now).
Great boat. Looks very complete. Unfortunately, the hull was broken on the back end. Wondering how this could happen. But, as I ordered multiple parts, the warehouse guy opened the box to put the remaining items ordered in. I don't like that.
This was my 60th order at HK and the really bad thing is the service. When something arrives broken (happened for the 2nd time), you have to ship it back at your costs. The service location is not in Germany but in the UK, which costs me bloody 15 Euros for the parcel. This is 15pcnt of the item's price. No, hobbyking, this is no service orientation.
I bought this yacht now for the second time in order to get a fast replacement before summer ends and before the boat is sold out agin.
Nice sailing can been seen and controlled even from 400m distance. Light set should be added for night sailing!Had a phantom previously and had a blast , but this boat. .... It's even better looking and faster, both running on stock gear (gonna change it though), with little and cheap modifications this boat is water proof, some guy here recommended making a mold to cast a bulb out of lead, I did this and it's the best modification you can do, a little over 2kgs !! Great performance, great boat.I have purchased the ocean racer I very pleased with it,when adding ballast I would say put at least,2.3kg and it will sail great, jimI don't know what the negative fuss is all about this product. I ordered mine and it was shipped in four days; it stayed in customs for 5 days and received it in excellent condition. So nine days in all, not bad! The product was packed tightly inside and out; no damages and the servos work as they should. I assembled it with ease using the supplied instruction - very simple! I packed the Bulb with steel BB's and a five minute epoxy. I don't know what the weight of the bulb is after this procedure but rest assured that the boat is exactly on the marked water line. I had great fun with the sailboat on her maiden voyage in the pool. No modification is needed. I will bring it to the marina next time now that I know that this sailboat is capable of what it's suppose to do. I am a very satisfied customer, thanks Hobby King!The boat definately needs more balast in the bulb,to do this I have cut the bulb into 2 halves,made a plaster of paris male plug.thoroughly dried it with a heat gun,then sprayed a coat of paint to make it water proof then used this to make a female mould to cast the lead in to both halves then glued it back together and painted it,the B rig off an IOM is perfect for this boat in
I just bought an Ocean Star, grate I thought? Well it arrived to day with a rattle in the box? Witch I thought was unusual? Got home from the post office & opened the box it was in.. Is this a new boat or a S/Hand one? ok 1 mast has paint missing, scratches on it ?.. 2 The hull has paint missing looks like more scratchers?.. 3 Servo block broken away from hull?4 the screws holding the servo & the winch are Rusty ? I was not imprested at all,
Then what to do? Take some pic
Will send it back, then Id have to what too long, plus to cost too send it back?
well got it all ready to sail to windy not to bad for its fist run
2nd run so so ended up no wind?? :
3rd run the bulb was lose, went to tighten it up the bolt holding it to the keel fell out??
The keel had split????
The keel is split on the back edge about 4 1/2inc from the hull, down?? The leading edge is split 2 inc in the middle of the keel,
The rudder shaft is bent?? Went to straiten this, & split the rudder, were the mask fits in too the deck, it has broken away.. SO??
and the cost to send it back ??? who nows could go too a new boat, & the cost to TAKE it back,7 hour's drive, I could buy 3 boats, ITS not Hobby Kings fault, it look's like I got all the crap thrown in a box and was sent out