Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Red Arrows Hawk 35mm EDF Micro Jet EPO (PNF)

Red Arrows Hawk 35mm EDF Micro Jet EPO (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
T45-35-PNP
WANT FREE SHIPPING? Click here to find out more!

Dieser winzige BAE Hawk ist erstaunlich, EPO-Schaum mit seinen Feder Statistiken kombiniert bedeutet, dass es der Quote weniger als 100% der Landung sehr nachsichtig sein. Die 35-mm-Lüftereinheit und ESC sind vorinstalliert, da die Quer- und Höhenruder Servos sind, kommt das Modell in zwei Stücke, so dass alles, was Sie tun müssen, wenn es ankommt ist die vertikale Stabilisator befestigen, die RC-Ausrüstung an einen Reciever anschließen, die Micro verwendet Molex 3 Pin conectors, wie der Hobbyking OrangeRX 4-Kanal-Micro-Empfänger und Sie sind bereit zu gehen ...... wo waren wir? Ach ja, die berühmten Red Arrows Kunstflug in den Park durchführt, einen Basketballplatz, in der Tat ziemlich gut überall sind diese Modelle eine absolute Schrei, wenn sie mit Freunden geflogen, in der Tat genug bekommen von Ihnen zusammen und sehen Sie, wenn Sie einige abziehen können jene atemberaubenden enger Formation Routine die Red Arrows sind berühmt für!

Die Box das Modell in ankommt ist wirklich praktisch, nicht nur dem Transport Aufhänger Ausschlag aber die Ersatz Taschen in der Verpackungsschaum sind ideal für den Transport Ersatz LiPolys zu verhindern, und Sie werden so viel Spaß mit diesem haben, würde ich ein paar tragen! Dieser Hawk ist so süß, auch Ihre Frau wird es mögen!

Specs:
Spannweite: 363 mm
Länge: 431mm
Fluggewicht: 95g
Flügelfläche: 2.35dm2
Flächenbelastung: 40,4 g / dm 2
EDF: 35mm mit 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC
Servo: 3 x 2 g

Eingeschlossen sind:
Optional Missiles
3 Blatt-Ventilator-Rotor
Anleitung

Benötigt:
Ihre eigene 4 - Kanal - TX / RX (kompatibel RX mit 1.25mm Molex 3 Pin - Steckverbinder)
7.4V 450mAh 2s Lipo Akku

  • Artikelbezeichnung T45-35-PNP
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 720.0000
  • Länge 520.00
  • Breite 110.00
  • Höhe 505.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very nice looking Hawk but needed a few modifications. I run this on 3S 450 gensace lips and a H-King 10a esc. Very nice power but didn't try it on 2s. The Aileron control horns needed some glue and tightening and the cockpit is missing the pilots (lol). It's fun to fly but needs a big hard throw to get it moving

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice looking Hawk but needed a few modifications. I run this on 3S 450 gensace lips and a H-King 10a esc. Very nice power but didn't try it on 2s. The Aileron control horns needed some glue and tightening and the cockpit is missing the pilots (lol). It's fun to fly but needs a big hard throw to get it moving

Very cool micro edf. Hand launching takes a bit of practice but a nice firm toss about 45 degrees gets it up ok. Running stock setup and flys well and straight. Orientation is a bit hard at a distance as it's all red. Max throws for elevator as it is very small and set minimum throws on ailerons as it is very responsive and can be very twitchy at full throttle.
Overall a fun, small and great sounding little edf.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very cool micro edf. Hand launching takes a bit of practice but a nice firm toss about 45 degrees gets it up ok. Running stock setup and flys well and straight. Orientation is a bit hard at a distance as it's all red. Max throws for elevator as it is very small and set minimum throws on ailerons as it is very responsive and can be very twitchy at full throttle.
Overall a fun, small and great sounding little edf.

Wow I like this T45. I have the red Bae Hawk version, not the white Gosh Hawk scheme. Mine came out of box lovely but had to do sum surgery to get it sweet. I noticed that one of the aelieron servos didn't have tape on it like the elev and other aelieron servo, on closer inspection it is different so I ashume it should be the elev servo and was put in the wrong spot on assembly line. No matter I swapped the right one into aelieron spot and used a turnigy digital 4g servo for elevator after freeing up the rods and running in the epo hinges, much freeier action. I also made little plastic washers for the control rod links to the horns to take out the freeplay. Shortened all the wires and removed some plugs too, but still with a nano tech 2s 350mah my auw (all up weight) is 120g. It shore makes good thrust testing so maiden shortly, then might go 3s setup and try getting auw down a bit more. Too happy can't wait, I have the twin A10 35mm too, it was heavy but flys excellently like a bigger plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow I like this T45. I have the red Bae Hawk version, not the white Gosh Hawk scheme. Mine came out of box lovely but had to do sum surgery to get it sweet. I noticed that one of the aelieron servos didn't have tape on it like the elev and other aelieron servo, on closer inspection it is different so I ashume it should be the elev servo and was put in the wrong spot on assembly line. No matter I swapped the right one into aelieron spot and used a turnigy digital 4g servo for elevator after freeing up the rods and running in the epo hinges, much freeier action. I also made little plastic washers for the control rod links to the horns to take out the freeplay. Shortened all the wires and removed some plugs too, but still with a nano tech 2s 350mah my auw (all up weight) is 120g. It shore makes good thrust testing so maiden shortly, then might go 3s setup and try getting auw down a bit more. Too happy can't wait, I have the twin A10 35mm too, it was heavy but flys excellently like a bigger plane.

Very powerfull jet. It's my first one, and I'm in love with it. I fly with my nanotech 300mah or 450 2s lipo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerfull jet. It's my first one, and I'm in love with it. I fly with my nanotech 300mah or 450 2s lipo.

Very beautiful jet to fly!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very beautiful jet to fly!!!!

this little red arrow looks very nice and even has 2 little pilots in it,sadly flight wise it is very under powered on the 2 cell set up and barley has enough thrust to stay airborne,will do rolls but forget loops,also it does not like wind at all and get thrown around but this maybe to do with the lack of power again,3 cell is the only way to go with this if you want it to last

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this little red arrow looks very nice and even has 2 little pilots in it,sadly flight wise it is very under powered on the 2 cell set up and barley has enough thrust to stay airborne,will do rolls but forget loops,also it does not like wind at all and get thrown around but this maybe to do with the lack of power again,3 cell is the only way to go with this if you want it to last

ok otimo produto estou no aguardo me recomendaro

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ok otimo produto estou no aguardo me recomendaro

A cute little model. Mine arrived with slightly warped tailplane halves. Easily straightened and strengthened by cutting slots in the underside and inserting some flat carbon strip. Did the same on the wing to prevent flex. Hoping that the extra stiffness will make the model groove better. Fitted a dsm-x 6 CH. Rx and 2s 460 turnigy battery. Had to remove foam in the battery bay to get everything in. Cg was spot on with this set up

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A cute little model. Mine arrived with slightly warped tailplane halves. Easily straightened and strengthened by cutting slots in the underside and inserting some flat carbon strip. Did the same on the wing to prevent flex. Hoping that the extra stiffness will make the model groove better. Fitted a dsm-x 6 CH. Rx and 2s 460 turnigy battery. Had to remove foam in the battery bay to get everything in. Cg was spot on with this set up

Just received my Hawk from UK Warehouse. Please note that it now has NORMAL SIZE type servo plugs and not the Micro Molex type as described above. It also has servo wire extenders, not good in such a small space. The elevator works through snake/wires and the servo does not have enough power to overcome the friction, so I have installed a slightly larger servo. Having got a RX that is compatible with the micro plugs specifically for this model the size of the plugs and extension wires is a major spoiler. The receiver was ordered and included at the same time, no comment from HK, sad really that they make this type of error.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received my Hawk from UK Warehouse. Please note that it now has NORMAL SIZE type servo plugs and not the Micro Molex type as described above. It also has servo wire extenders, not good in such a small space. The elevator works through snake/wires and the servo does not have enough power to overcome the friction, so I have installed a slightly larger servo. Having got a RX that is compatible with the micro plugs specifically for this model the size of the plugs and extension wires is a major spoiler. The receiver was ordered and included at the same time, no comment from HK, sad really that they make this type of error.

Mine also arrived this morning with standard servo connectors. Lovely looking plane. But don't tell the wife coz I'm not supposed to see it till Christmas :). Could someone tell me if there is supposed to be something under the nose of this plane as mine has a small square slot?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine also arrived this morning with standard servo connectors. Lovely looking plane. But don't tell the wife coz I'm not supposed to see it till Christmas :). Could someone tell me if there is supposed to be something under the nose of this plane as mine has a small square slot?

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!