Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • Global

Red Swan Laser Cut Balsa KIT 1250mm (Kit)

Red Swan Laser Cut Balsa KIT 1250mm (Kit)

QTY:

Now save Speichern 0,00 € 0,00 €

26,35 €
Stock:
Gewicht:
935 g
SKU:
099000032

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
servo
motor
acc
Product
Description

Hier ist ein weiterer großer erschwinglichen wenig Balsa-Kit für die traditionelle R / C-Bastler und Baumeister, die Modelle von Kit-Form genießt zu konstruieren.

The Red Swan ist ein alles aufgebaut, 4-Kanal, elektrisch betriebene Park Fliegensegelflugzeug. Es verfügt über scharfe genaue lasergeschnittene Teile, die einfach zusammen mit wenig Aufhebens Schlitz und der Flügel sieht fantastisch aus, wenn sie mit transparenten Abdeckung bedeckt der Konstruktion zu zeigen.

Das Antriebssystem kann eine einfache kleine outrunner und 2s Batterie sein, sich mittels Micro-Servos ihr schön leicht zu halten.

Das resultierende Modell ist ein großer kleiner Park Elektrosegler fliegen, die gut funktioniert, Querruder / Höhe / Seite / Motorsteuerung hat, dennoch robust genug ist, um die ungerade zu handhaben "oops!" Moment vom Anfänger Flyer und kompakt genug, um leicht transportiert werden.

Specs:
Span: 1250m
Länge: 810 mm

Benötigt:
4-Kanal-Funksystem und 4 x Micro-Servos
1550kv 15amp Kundschafterschulterstücke
15Amp Esc
2 oder 3 s 1300mAh Lipo Akku
Propeller (8 x 4)
CA Kleber
Abdeckfolie
Grund Hobby Werkzeuge (Messer, Sandpapier usw.)

Erstellen Sie manuell unten unter der "Dateien" Registerkarte aufgelistet

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    099000032
  • Brand:
    Nein
  • Gewicht ( g)
    935.00
  • Länge
    800.00
  • Breite:
    70.00
  • Höhe:
    140.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Nice little kit for the money. need a bit of experience to build it. instructions a little bare to say the least!
Quality
Value
Overall
Quality
Value
Overall
fantastico, ne ho presi 2 a magazzino e uno sempre con me, 1400k lipo 1500-1600 prop 9*4
Quality
Value
Overall
Quality
Value
Overall
This kit is THE kit for those who love the old school balsa kit..
Wood is good in general and laser-cut parts saves valuable time.

That said, this is not for beginners, the building notes are nonexistent and it is necessary to go on the net to find build logs, fortunately quite numerous.

I just have two disappointments, after assembling and flying with the Red Swan:
First, it is quite heavy. Ready to fly weighed approx 700gr.
For a wingspan of 1224mm he had to fly fast enough to generate the necessary lift.

Then, the weak point is the horizontal stabilizer. It is very close to the ground and the landing must be perfectly horizontal on a very flat surface. The slightest clod of dirt or grass can easily pull the horizontal stabilizer off.
This happened to me twice. The first time the tail has been torn, I rebuilt the entire tail section in plain balsa, much stronger.
Alas, he clung to a clump of grass and the section of the fuselage near the tail (with holes for pushrods) broke ... :(

That said, it's a nice old school kit for a handyman with experience and a good flat ground for landing.

I posted 3 pictures of my Red Swan ( The under files section Cardinal ) just before the maiden flight
Quality
Value
Overall
Quality
Value
Overall
NIcely cut kit. A lot of fun to build, and they look great when complete. I wish hobbyking would stock more laser cut kits.
Quality
Value
Overall
Quality
Value
Overall
Fine construction, precise laser-cut parts, but wrong building instructions:
First, the 2 fuselage sides must be prepared with strengthening sticks first, then glued together with bulkhead parts, servo tray and motor mount in one step to avoid distortion!
Second, the order of wing ribs is wrong in the picture as well as in text part 2.02. Correct is 6 pc. B3 in the middle, then on each side one pc. B4, 5 pc. B5, each parted by a pair of B7 glued at both sides of the balsa spars, finished by one pc. B6. The construction should be done on a board using needles to fix the parts, thus obtaining a straight wing.
Quality
Value
Overall
Quality
Value
Overall
Fine parts, fitting well, but:

Wrong instruction manual!

The two sides of the fuselage must be built symmetrically without yet glueing the bulkhead parts, the motor mount and the servo base. Only when finished, both sides and the mentioned parts must be fitted together in one glueing step.

Otherwise the fuselage will turn out rather distorted!



Second mistake: the denotation of the wing ribs in the picture of the middle wing part and in textpassage 2.02 is wrong. As there are only 2 ribs B4, but 12 pc. B5 and 4 pc. B6, the correct order must be:

6 (or 8? There are 8 pc.!) ribs B3 in the middle, then, spaced by B7, one rib B4, followed by 5 pc. B5 on each side, each spaced by one B7 part, and one B6 rib to strengthen the edges.

The other two B6 should strengthen the edges of the outer wing parts.
Quality
Value
Overall
Quality
Value
Overall
Soft package, no cover film, no plans.
Quality
Value
Overall
Quality
Value
Overall
I missed drawing, so I draw him, I upload to files.
Servos will use HXT500.
Motor temporarily 24 grams hexTronik Brushless Outrunner 1300kv.
Quality
Value
Overall
Quality
Value
Overall
First flight today with a 2822/17 3s and 8*4 prop. Good 3 axes glider slow rolls, loops, inverted flight. Can be used by a beginner (but foamies will be much more crash rsistant...). The manual is really not here to help and 9 gr servos are too big for the ailerons. I have also replace the supplied leading ege of the wing by a carbon fiber tube 3mm. Despite the inexisting and wrong manual, we had good time with my son building this kit and at the end.... Good surprise....great flying capacities!
Quality
Value
Overall
Quality
Value
Overall
So much potential ruined by horrible plans. I'm about 2/3 done and am looking forward to flying it. Search for my build thread on RC Groups . Com for build information. It's been a fun build so far (other than the lack of instructions). Wood quality is decent but heavy, packing is good, and fit of the laser cut parts is ok.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
REDSWAN Pepa drawing PDF ALL download now [41kb]
REDSWAN Pepa drawing DXF download now [39kb]
REDSWAN Pepa drawing DWG download now [43kb]
REDSWAN Pepa drawing PDF 5x6 download now [79kb]
REDSWAN Pepa drawing DXF download now [39kb]
REDSWAN Pepa drawing DWG download now [43kb]
REDSWAN Pepa drawing PDF ALL download now [41kb]
Construccion RedSwan Mexico3 Terminado download now [442kb]
Construccion RedSwan Mexico download now [521kb]
Construccion RedSwan Mexico 2 download now [502kb]
Photo download now [310kb]
Red Swan Build Manual download now [1921kb]
Red Swan with cox engine download now [160kb]
Red Swan with cox engine download now [205kb]
Red Swan Manual download now [1921kb]
From Trentino download now [1662kb]
From Trentino download now [1662kb]
My Swan Laser from Trentino download now [1662kb]
My Swan Laser from Trentino download now [1662kb]
plain laser cut black swan download now [500kb]
No File Name download now [406kb]
Red Swan in TG-3A colors download now [787kb]
Red Swan 1- India download now [67kb]
Red Swan - Sanjay, India download now [1330kb]
No File Name download now [67kb]
RED SWAN PAKISTAN download now [568kb]
PAKISTAN download now [677kb]
RED SWAN MFG PAK download now [615kb]
RedSwan_Custom_Design download now [89kb]
construction Red Swan 2 axes France download now [543kb]
Red Swan modified download now [1120kb]
No File Name download now [1145kb]
No File Name download now [813kb]
My red swan named CARDINAL 1/3 download now [183kb]
My red swan named CARDINAL 2/3 download now [177kb]
My red swan named CARDINAL 3/3 download now [166kb]
Redswan download now [1145kb]
With ap 0.061 nitro engine download now [6188kb]
my first one download now [66kb]

Combine

essential items and
battery
servo
motor
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.