Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Ersatz komplette Zündung Set für Einzylindergasmotoren

Ersatz komplette Zündung Set für Einzylindergasmotoren

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

29,06 €
Status:
Auf Lager
SKU:
CM-6spcap
WANT FREE SHIPPING? Click here to find out more!

Ersatz komplette Zündung Set für Einzylindergasmotoren.

Eingeschlossen sind:
Zündeinheit
Hall-Sensor, Lead & Bracket
CM6 & 14mm Stil Steckerkappe
Zündenergie Blei
Schlangen-Verpackung
Schlösser Servokabel

  • Artikelbezeichnung CM-6spcap
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht 172.0000
  • Länge 160.00
  • Packaging Width 30.00
  • Höhe 110.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Die Zündung ist super
Habe sie an einem DA 50 verbaut Hallgeber musste um 30grad versetzt werden
Motor läuft Top über das ganze Drehzahlband und hat ein super anspringverhalten
Kann die Zündung nur Empfehlen und würde sie sofort wieder kaufen

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

Die Zündung ist super
Habe sie an einem DA 50 verbaut Hallgeber musste um 30grad versetzt werden
Motor läuft Top über das ganze Drehzahlband und hat ein super anspringverhalten
Kann die Zündung nur Empfehlen und würde sie sofort wieder kaufen

Ich habe bisher 3 Motoren mit der Zündung ausgerüstet. 1x King 70 und 2X 3W 60 Heindel.
Alle 3 funktioniere bisher einwandfrei. Zündakku ist jeweils ein 4-Zeller NIMH.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich habe bisher 3 Motoren mit der Zündung ausgerüstet. 1x King 70 und 2X 3W 60 Heindel.
Alle 3 funktioniere bisher einwandfrei. Zündakku ist jeweils ein 4-Zeller NIMH.

replaced my dieing DLE20 module, excellent bit of kit, loads of spares too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

replaced my dieing DLE20 module, excellent bit of kit, loads of spares too.

I bought this electric ignition system a few months ago and it turned out to be a great investment. It works fantastic on my 7 year old 3MM TOC 53cc gas engine which has over 500 flights in it. I was having trouble with starting (both cold and hot), rough idle, inconsistent top end rpm and fouling spark plugs.. The old engine ran but I just knew it was not all correct. As soon as I installed this HK ignition system and hall sensor all my problems went away. Cold starts are easy and reliable and warm/hot starts are just 1 flip, every time! Idle is down around 1600 and top end is 7000 with 22x8 wood prop. Transition is excellent. The only question left is how long will it last? We shall see. But for the price, I would recommend this HK ignition system to all my fling buddies.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this electric ignition system a few months ago and it turned out to be a great investment. It works fantastic on my 7 year old 3MM TOC 53cc gas engine which has over 500 flights in it. I was having trouble with starting (both cold and hot), rough idle, inconsistent top end rpm and fouling spark plugs.. The old engine ran but I just knew it was not all correct. As soon as I installed this HK ignition system and hall sensor all my problems went away. Cold starts are easy and reliable and warm/hot starts are just 1 flip, every time! Idle is down around 1600 and top end is 7000 with 22x8 wood prop. Transition is excellent. The only question left is how long will it last? We shall see. But for the price, I would recommend this HK ignition system to all my fling buddies.

Die Zndung wurde an einen RCGF 26ccm Motor montiert. Funktioniert damit absolut perfekt. Eher besseres Anspringverhalten als mit der original Zndung.
Der Kerzenstecker musste vom montierten CM6 Kerzenstecker auf den beiliegenden 14mm Kerzenstecker umgebaut werden, was jedoch kein Problem darstellt.
Ich verwende einen 5-zelligen Eneloop Akku; 2000mAh

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Die Zndung wurde an einen RCGF 26ccm Motor montiert. Funktioniert damit absolut perfekt. Eher besseres Anspringverhalten als mit der original Zndung.
Der Kerzenstecker musste vom montierten CM6 Kerzenstecker auf den beiliegenden 14mm Kerzenstecker umgebaut werden, was jedoch kein Problem darstellt.
Ich verwende einen 5-zelligen Eneloop Akku; 2000mAh

Super kid zapalovania vhodny pre DA, DLE, DLA a vetky motori co pouvaju CM6 sviecku. Jednoduch intalcia.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super kid zapalovania vhodny pre DA, DLE, DLA a vetky motori co pouvaju CM6 sviecku. Jednoduch intalcia.

Fitted to a DA50R ran and started better than ever, had to drill and tap new mounting holes for pickup to get correct timing on this engine.recomended great replacement

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fitted to a DA50R ran and started better than ever, had to drill and tap new mounting holes for pickup to get correct timing on this engine.recomended great replacement

Bought this to replace the original ignition unit on a DLE20. No fuss, no fiddling, no adjustments, and no problems. Great value as well. I compared prices on a well known auction site, and this was a complete package including 'all' leads, sensor, and caps. The auction site was ignition box with attached leads only, and including carriage, was more expensive! No brainer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this to replace the original ignition unit on a DLE20. No fuss, no fiddling, no adjustments, and no problems. Great value as well. I compared prices on a well known auction site, and this was a complete package including 'all' leads, sensor, and caps. The auction site was ignition box with attached leads only, and including carriage, was more expensive! No brainer.

this ignition set works with my 61cc gas engine exactly like its original ignition set. the cap fits with the ngk cm6 and so i did not have to change the cap. easy to install

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this ignition set works with my 61cc gas engine exactly like its original ignition set. the cap fits with the ngk cm6 and so i did not have to change the cap. easy to install

I used one of these to convert an ASP180FS to petrol very sucessful it is too , good advance reliable pickup too, dosn't miss a beat . I changed the plug cap to work with a 1/4X32 plug and used a small bar magnet as a trigger added an old ex chainsaw carb and Bingo ! Turns up to a 20x7 or 18x8 wooden prop with ease and hauls my 80" PT19 like a rag doll . Great product and value , cheers HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used one of these to convert an ASP180FS to petrol very sucessful it is too , good advance reliable pickup too, dosn't miss a beat . I changed the plug cap to work with a 1/4X32 plug and used a small bar magnet as a trigger added an old ex chainsaw carb and Bingo ! Turns up to a 20x7 or 18x8 wooden prop with ease and hauls my 80" PT19 like a rag doll . Great product and value , cheers HK

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
Hoja Instrucciones Download [1186]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save