Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

RotorBits Servo Halter Set w / Gear (Schwarz)

RotorBits Servo Halter Set w / Gear (Schwarz)

Shipped From:
  • Global
QTY:

Now save Speichern 3,78 € 3,78 €

Special Price 1,91 € 1,91 €

You save Speichern 3,78 € 3,78 €

Was  5,69 €

Status:
Auf Lager
SKU:
171000393-0
WANT FREE SHIPPING? Click here to find out more!

Nur weil Sie Ihre Sätze Legos und Erector entwachsen haben, bedeutet nicht, der Spaß aufhören muss. Einführung in RotorBits, den modularen Aufbau Reihe von unendlichen Möglichkeiten. Basierend auf der Idee der standardisierten Anschlüsse und die Dimensionen, um die einzige Grenze, was gebaut werden kann, ist Ihre Fantasie.

RotorBits können in andere Kreationen recycelt und wiederverwendet werden, mischen und verschiedene Bits Anpassen eines Y6 oder Bi-Rotor zu machen! Wie Sie Ihre Sammlung von Bits wächst und Konzepte mit Plug & Play entwickeln einfach, wer weiß, was man mit oben kommen kann? Haben Klubwettbewerbe für kreative Ideen oder Rennen für schnellste Box Luft baut. RotorBits ist eine Idee, die niemals nur rekonfiguriert veraltet sein.

RotorBits Servo Halter Set w / Gear (Schwarz)

Specs:
Größe (LxBxH): 84 x 30 x 18mm
Montagerohröffnung: 10 x 10 mm
Servo - Kennzeichen (L x B): 24 x 23,5 mm
Servo Apator: 21 Zähne
Motorbefestigungsbohrung: 17mm (Loch zu Loch)
Gewicht: 39,1 g
Farbe: Schwarz

  • Artikelbezeichnung 171000393-0
  • Brand RotorBits
  • Kapazität ( mAh) -
  • Gewicht 48.0000
  • Länge 60.00
  • Breite 25.00
  • Höhe 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This Yaw mount is superb. It is good option for DIY Tricopters. The only problem I found is you need to use 10x10mm booms. Would be good if they had 13x13mm option as well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This Yaw mount is superb. It is good option for DIY Tricopters. The only problem I found is you need to use 10x10mm booms. Would be good if they had 13x13mm option as well.

Great solution but poor quality. Aluminium parts should be cut me more precise. I had to glue in tail part to motor mount. Tail screw didn't fit because of imperial diameter vs metric from the opposite side. Its now M3 and holds tight. Had to purchase HK servos, standard servos didn't fit at all.
After all modifications works great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great solution but poor quality. Aluminium parts should be cut me more precise. I had to glue in tail part to motor mount. Tail screw didn't fit because of imperial diameter vs metric from the opposite side. Its now M3 and holds tight. Had to purchase HK servos, standard servos didn't fit at all.
After all modifications works great.

The injection molding is pretty dead on for tension fitting onto the rotorbits shafts. But, the amount of backlash in this gear to gear setup is really bad. The servo has to push perpendicular to the servo shaft (you could wrap a rubber band around both to solve) and the gears aren't cut to reduce backlash. They are good for prototyping, but in the long run I'm switching to something stronger and more accurate.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The injection molding is pretty dead on for tension fitting onto the rotorbits shafts. But, the amount of backlash in this gear to gear setup is really bad. The servo has to push perpendicular to the servo shaft (you could wrap a rubber band around both to solve) and the gears aren't cut to reduce backlash. They are good for prototyping, but in the long run I'm switching to something stronger and more accurate.

found this page if any one wants to know how to make this

http://blacktieaerial.com/2014/12/11/assembling-rotor-bits-servo-mount/

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

found this page if any one wants to know how to make this

http://blacktieaerial.com/2014/12/11/assembling-rotor-bits-servo-mount/

good design for a tri tail

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good design for a tri tail

Im using the TGY 9018MG, I noticied that this mount does force too much the servo, expect some broken gears ;)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im using the TGY 9018MG, I noticied that this mount does force too much the servo, expect some broken gears ;)

balla tutto e ha la tendenza di stincarsi brucciando il servo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

balla tutto e ha la tendenza di stincarsi brucciando il servo

works great - - if you find a fitting servo 8-)))

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great - - if you find a fitting servo 8-)))

For the price you can't beat it. The fact that the servo has to be zip tied is kind of weak but I will 3D print something for it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the price you can't beat it. The fact that the servo has to be zip tied is kind of weak but I will 3D print something for it.

I replaced the delicate X900 assembly with one of these. Much more crash resilient and spares available.

04B14393-7765-433A-B53B-4688C68B3732

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I replaced the delicate X900 assembly with one of these. Much more crash resilient and spares available.

04B14393-7765-433A-B53B-4688C68B3732

  1. 1
  2. 2
Customer files
exploded view of rotorbits servo mount Download [234]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save