Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

RotorBits Tricopter Kit Mit Baukastensystem (KIT)

RotorBits Tricopter Kit Mit Baukastensystem (KIT)

Now save Speichern 25,10 € 25,10 €

Special Price 4,33 € 4,33 €

You save Speichern 25,10 € 25,10 €

Was  29,43 €

Status:
Ausverkauft!
SKU:
171000412-0
WANT FREE SHIPPING? Click here to find out more!

Nur weil Sie Ihre Sätze Legos und Erector entwachsen haben, bedeutet nicht, der Spaß aufhören muss. Einführung in RotorBits, den modularen Aufbau Reihe von unendlichen Möglichkeiten. Basierend auf der Idee der standardisierten Anschlüsse und die Dimensionen, um die einzige Grenze, was gebaut werden kann, ist Ihre Fantasie.

Die RotorBits Tri-Copter ist eine geniale Anpassung der RotorBits modularen Teilen, eine einzigartige verein nehmen auf dem beliebten und großen Fliegen tri-Copter zu erstellen. Eines der einzigartigen Bits in der Tri-Copter verwendet wird, ist das Getriebe verzahnt Kippmechanismus. Der Neigungsmechanismus führt den zuvor komplexe motorische Neigungs Montage und vereinfacht es nur zwei Gänge nach unten und einem Servo. Die modulare Neigungseinheit kann nur gleiten auf einem RotorBits 10mm Welle. Die bunten TRI Mittelplatte hat Beiträge für den Flugregler und verschiedene Bestimmungen zur Anpassung anderes Zubehör und Bits 45x45mm integrierten Anbau. Die Landekufen haben eine Zip-tie abtrünnigen Design und Mond lander abgerundete Tasse Füße für Boden Skimming Spaß. Die einfache modulare Idee macht die Montage zum Kinderspiel, Spaß zu bringen zurück zu einem manchmal über komplexe Idee.

RotorBits Komponenten können zwischen mehreren Projekten ausgetauscht werden, so dass Sie Ihre Herzenslust zu mischen und anzupassen! Wie Sie Ihre Sammlung von Bits wächst und Konzepte entwickeln, werden Sie feststellen, dass die Möglichkeiten sind endlos. Wer weiß, was Sie als nächstes überraschen wird! RotorBits ist eine Idee, die nur neu konfiguriert nie veraltet, werden.

Eigenschaften:
• Modulare rutschen zusammen Konstruktion
• Dauerhafte glasfaserverstärktem Nylon und Carbon Teil
• Geringes Gewicht
• Anpassungsfähig und wiederverwendbar RotorBits Teile
• Getriebe angetrieben Schwenkrotor

Specs:
Höhe: 155 mm
Gewicht: 258g
Radstand oder Größe: 555mm

RotorBits enthalten:
3 x Kohleholme
3 x Landung Füße
3 x Landung Beine
1 x Tri Zentrieraufnahme
2 x DST Motorhalterungen
1 x Tilt-Servomotorhalterung
1 x-Beutel Montage Befestigungen und Kabelbindern

Erforderlich:
3 x DST-1200KV oder vergleichbarer Motor
3 x 20 A Multirotor WSR
1 x 9g Servo
3 x 10 Zoll Requisiten 2 cw 1 ccw
1 x Flugregler
1 x 1500 ~ 2200mah 3s 11,1V LiPoly Batterie
1 x 5-Kanal Funksystem

  • Artikelbezeichnung 171000412-0
  • Brand RotorBits
  • Kapazität ( mAh) -
  • Gewicht 630.0000
  • Länge 330.00
  • Packaging Width 120.00
  • Höhe 180.00
  • RotorBits TriCopter Kit With Modular Assembly System
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.

Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.

The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!

Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.

Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.

I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.

Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!

Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.

This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!

  1. 1
  2. 2
Customer files
No File Name Download [4430]
Theunsie'sTri copter Download [4430]
Total weight 829G,RobbotheDrifter Download [1396]
Y6 LAYOUT Download [99]
Y6 I Download [1007]
Servo Saver Download [176]
Fishing Line Download [120]
Manual Download [499]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save