RunCam Swift 2 600 TVL FPV Camera w/2.3mm Lens (Black)

The RunCam Swift 2 is the go-to FPV camera of choice. It comes with an OSD with voltage monitor and a timer, this allows you to see the battery voltage at all times and lets you know exactly when to land. There is also a small timer on the screen as back up to let you know how long you have been flying. On top of all this RunCam have fixed all the small niggles that some of you had with the original Swift and have come up now with a near perfect camera.

The RunCam Swift 2 is a lightweight 600TVL camera with a 1/3" Sony Super Had II CCD image sensor, this sensor has been a favorite with FPV pilots for a long time. It is optimized for FPV use with custom auto exposure algorithms and a very low latency, this provides you with a constant very clear picture. The ground will never get too dark and the sky will not get overexposed, perfect for fast FPV racing and many other FPV uses. This package comes with an OSD key press programming board and a full set of the necessary cables.

Features:
• Able to adapt to a variety of FPV scenario's
• Integrated OSD with voltage monitor and timer
• Accurate exposure algorithms
• 2.3mm wide angle lens
• Top connections for easy access
• Perfect for FPV racing and other FPV uses
• Small, compact and lightweight (only 14g)
• Supplied with adjustable mount

Specs:
Image Sensor: 1/3″SONY Super HAD II CCD
Horizontal Resolution: 600TVL
Lens: 2.3mm
Signal System: PAL
Integrated OSD: Yes
Integrated MIC: Yes
S/N Ratio: >60dB (AGC OFF)
Electronic Shutter Speed: PAL: 1/50~100,000
Auto Gain Control (AGC): Yes
Back Light Compensation (BLC): Yes
Min. Illumination: 0.01Lux@1.2F
WDR: D-WDR
DNR: 2DNR
Day/Night: Color/Auto/B&W
Power: DC 5-36V
Net Weight: 14g
Dimensions: 28.5x26x26mm

Contents:
1x Camera
1x Aluminum bracket
1x Set of screws
1x OSD Key-press Board
1x 3pin FPV silicone cable
1x 5pin FPV silicone cable
1x 2pin extension cord for menu cable

Please Note: A user manual is available under the "Files" tab.