Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

RX3S OrangeRX 3-Achsen Flugstabilisator

Generating Links

RX3S OrangeRX 3-Achsen Flugstabilisator

Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9171000102
Kostenloser Versand? Klicke hier um mehr zu lernen!

Mit Hilfe eines einzigen hochpräzise 3-Achsen-MEMS-Kreisels ist die OrangeRX 3-Achsen Flugstabilisator fähig Flug zu stabilisieren, auf fast jedem Starrflügler! Es sorgt für zusätzliche Stabilität, indem es automatisch die Quer-, Höhen- und Seitenruder Kanäle im Flug zu korrigieren. Dies kompensiert unerwünschte Änderungen in der Haltung des Flugzeugs aufgrund von Wind und anderen Faktoren. Kurz gesagt, ist es Ihr Flugzeug viel stabiler im Flug!

Die OrangeRX 3-Achsen Flugstabilisator ist ideal für diejenigen, die in den windigen Bedingungen zu fliegen neigen, wie es für die Windböen kompensieren, die normalerweise Ihr Modell um schieben würde. Es ist auch ein idealer Zusatz zu Ihrer Lieblings FPV Modell, das es auf dem geraden und Niveau zu halten, während des Fluges.

Dieses Gerät ist sehr einfach zu installieren und zu verwenden. Die einstellbaren Gain-Einstellungen werden auf 50% voreingestellt milden Stabilisierung an. Sie können ganz einfach die Verstärkung für jeden Kanal einstellen wie gewünscht zu erhöhen oder die Entschädigung für den jeweiligen Kanal (AIL, ELE, RUD) zu verringern.

Weil wir, Test entwerfen und diese Einheiten vollständig in Eigenfertigung (von 3D / 2D-Zeichnung zu Materialbeschaffung usw. Endmontage) können wir vollständig Produktion steuern und Produktkonsistenz vom Entwurf bis zum Versand des Produkts an Sie zu gewährleisten. Auch hat die Entfernung der mittleren Männer bedeutete, dass wir ein besseres Preis auf den Markt und Einzelhandel, diese Einheiten im Werk (unsere) Preise fahren kann!

Eigenschaften:
Fähig zu auf fast jedem Starrflügler Flug zu stabilisieren
Unterstützt 3D-Flug ohne die Stabilität zu untergraben
Unabhängige Gyro-Gain-Einstellung für Quer-, Höhen- und Seitenruder
Easy-to-Zugang Gyro-Schalter auf der Vorderseite des Geräts Umkehren
Kompaktes Design und geringes Gewicht

Specs:
Größe: 51x32x14mm
Gewicht: 14g
IC: Atmega168PA
Gyro: 3-Achsen - MEMS
Eingangsspannung: 4.8-6.0V
AVR - Schnittstelle: Standard 6 - polig
Signal vom Empfänger: 1520us
Signal zu Servo: 1520us

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Foxyy | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

May 17, 2013

Great gyro, cheaper than buying 3 individual gyros and works better. I haven't had any flutter with it unlike some other gyros. It is very easy to set up using the pots. I mounted it on a gyro pad to reduce vibrations.

WayToo | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 06, 2013

This is the only Hobby King product I have ever given a 5 crown rating. I bought three of these because the price was good but i was very surprised at how well they worked. I put the first one in a Bixler for experimental purposes and found that once you get it set up correctly the airplane becomes almost unconditionally stable in any wind. It does take a little time and effort to adjust the gain settings and they are not the same. I have more gain on the rudder than the ailerons and a bit more still on the elevator but when I put the Bixler in level flight it will maintain level flight. These are not an auto pilot but they actually work and are very good if you fly in wind the way I do. Thumbs up.

Bill | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 05, 2013

Excellent value, have 6 of these, some I am useing the 5v bec in the speed controllers and 2 i am using them coupled direct to a zippy Life 1100ma 6.6v rx batt, i do not know the voltage tolerances but presumed they would expect you could run them in conjunction with their own range of receivers, have had over 20 fiights on this set up and it has performed faultlessly, certainly makes you look a better pilot than what you actually are, one thing i know is when most have packed up because of windy conditions i am able to keep flying and i am only a very average pilot, only time will tell if i am running too high a voltage with the 6.6 volt but until then i am having alot of fun

Emmanuel | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 27, 2012

I never imagined flying in strong winds but my friend encouraged me to try. Not a pleasant experience. I bought this stabilizer to aid my flights. Initially i almost crashed had no clue how it worked. Now i have a good understanding and fly in very strong winds with hands off the radio. Cross wind landings are fun, crabbed all the way with hands off the radio and even touch down crabbed...lol

Just change the attitudes and it holds. I mostly use rudder and elevator and the plane flies fine.

Only thing bothering me was during no wind days had to manually disconnect the stabilizer else not fun. But with the V2 this is also resolved, already ordered the day it came in stock. Just waiting for it to come.

Dan | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 14, 2012

I bought 2 and I'm impressed by the design. One of the dip switches didn't work on the rudder, so I put that one in my little beater jet, the other one works fine. I need a few more and see there is a V2 for 3 dollars more, I think I will try the new one and a megapirate flight controller for my FPV. I have also use head lock gyro's with real time gain but you need 3 to do the same job....you do the math, lol.

Yaroslav07b | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 13, 2012

This is a great product i highly recomend this for your plane

s.l.oliver | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 09, 2012

The stabilizer is quite easy to install and logical to use. However, i am Not Super happy with the single aileron channel. There are ways to use it - but I do not like it !

Emmanuel | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 06, 2012

I tried it on my supercub LP with park 480 in winds 20-25 knots. It was fun. Initially took a while to get the hang of it but after that its been fun fun fun... I do not use aileron option and use only rudder (90pcnt gain) & elevator (75pcnt). Just set your attitude and the plane stays there. I do my approach in strong winds without even touching the controls. Its so much fun. Now i have ordered the newer model with remote option to switch it off.

Ben | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 01, 2012

While I wish there was more on HK's website about the technical aspects of this flight stabilizer, I have to admit that it is great in the wind. I was able to float my Bixler in 40 mph winds and thanks to this stabilizer, I had to do very little inputs on my transmitter.

Does a good job for aerial photography, the main reason I bought it. Would be 5 crowns if more documentation was available.

vargasesteban | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 29, 2012

Very nice product , be careful with the gain it is very sensitive and dont forget to order the extentions from fre receiver to this Gyro
they are MALE TO MALE http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=21758

Kundendateien
ATmega168AP Download [608]
ITG3205 Download [1126]
No File Name Download [1447]
weight of board alone Download [741]
weight of case alone Download [649]
complete unit weight Download [782]
back of the board Download [769]
Orange Rx Manual R3 by MyCoolRC Download [145]
Larger Pic Download [127]
Larger Pic Download [109]
  1. 1
  2. 2
  3. 3
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör