Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

S3650-3300 Brushless Inrunner 3300kv (15.5T)

S3650-3300 Brushless Inrunner 3300kv (15.5T)

Discontinued Product

Please continue searching for a similar product.
SKU:
S3650-3300
WANT FREE SHIPPING? Click here to find out more!

Motor Größe: 3650
RPM / V: 3300kv (15.5T)
Max Belastung: 59A
Max Volt: 14,8 2 ~ 4s
Max Watt: 750
Widerstand: 0,0129

Durchmesser: 36 mm
Montage Frontlochabstand: 25 mm
Frontmontage Gewindegröße: M3.0
Wellen - Durchmesser: 5mm
Schaftlänge: 16mm
Kann Größe: 540
Steckertyp: 4mm Kugel-Stecker
Gewicht: 222 g

  • Artikelbezeichnung S3650-3300
  • Brand -
  • Gewicht 290.0000
  • Länge 140.00
  • Packaging Width 55.00
  • Höhe 55.00
  • Kv (rpm / v) 3300.00
  • Max Current (A) 59.00
  • Widerstand ( mh) 0.00
  • Max Spannung (V) 14.00
  • Leistung ( W) 800.00
  • Welle A ( mm) 5.00
  • Länge B (mm) 50.00
  • Durchmesser C (mm) 36.00
  • Kann Länge D (mm) 50.00
  • Gesamtlänge E ( mm) 66.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Comprei o motor, ele foi usado apenas duas cargas de bateria, digamos que algo entre 45 e 60 minutos, para minha surpresa, o rolamento frontal dele se desmontou, suas esferas foram atradas pelo m e prensadas contra os fios do enrolamento partindo vrios desses fios... Alem disso, apesar de ele indicar uma potencia de 750wts, perde feio em potencia para um clone dos EZ-run (3600Kv).
Vantagens: eixo 5mm, pinhes fceis de encontrar ( no Brasil) desvantagens: rolamento de qualidade duvidosa, potencia mediana.
S recomendo para on-road, onde dificilmente ter sujeira ou algo do tipo para detonar rolamentos, e em geral so modelos mais leves.
Ps.: montado em um DST/DBX convertido.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Comprei o motor, ele foi usado apenas duas cargas de bateria, digamos que algo entre 45 e 60 minutos, para minha surpresa, o rolamento frontal dele se desmontou, suas esferas foram atradas pelo m e prensadas contra os fios do enrolamento partindo vrios desses fios... Alem disso, apesar de ele indicar uma potencia de 750wts, perde feio em potencia para um clone dos EZ-run (3600Kv).
Vantagens: eixo 5mm, pinhes fceis de encontrar ( no Brasil) desvantagens: rolamento de qualidade duvidosa, potencia mediana.
S recomendo para on-road, onde dificilmente ter sujeira ou algo do tipo para detonar rolamentos, e em geral so modelos mais leves.
Ps.: montado em um DST/DBX convertido.

Fantastic item. I use them all the time. In planes, in quadcopters, in cars, in boats - you name it. Nice durable motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic item. I use them all the time. In planes, in quadcopters, in cars, in boats - you name it. Nice durable motor.

Use this in my Tamiya DT-02 buggy. Drilled out sprocket to fit 5mm shaft. Very good power and good quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Use this in my Tamiya DT-02 buggy. Drilled out sprocket to fit 5mm shaft. Very good power and good quality.

hammer motor,hammer preis

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hammer motor,hammer preis

Espero que de certo em uma stampede!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Espero que de certo em uma stampede!

Otimo produto! Recomendo a compra!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Otimo produto! Recomendo a compra!

This motor is amazing. I installed it on the stock Trooper and got excellent results. The model has become much faster. She started jumping even on a small hill, and under hard acceleration the front part off the ground. All this on the battery Lipo 3S. Of the small negative - the motor is heated to 50-60 degrees, but it may not affect anything.From ESC to 60A and more will be just fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is amazing. I installed it on the stock Trooper and got excellent results. The model has become much faster. She started jumping even on a small hill, and under hard acceleration the front part off the ground. All this on the battery Lipo 3S. Of the small negative - the motor is heated to 50-60 degrees, but it may not affect anything.From ESC to 60A and more will be just fine.

i,m planning too use this engine in a 70cm deep v hull with a 120a esc
And 2 5000 mah 2s 30c lipo's. Will this engine survive?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i,m planning too use this engine in a 70cm deep v hull with a 120a esc
And 2 5000 mah 2s 30c lipo's. Will this engine survive?

UWAGA niskiej jakoi oyska naleao by je wymieni na dobrej jakoci , oyska zatary mi i po 30 minutach pracy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

UWAGA niskiej jakoi oyska naleao by je wymieni na dobrej jakoci , oyska zatary mi i po 30 minutach pracy

I bought this motor to use on a 4wd hpi mt2. It is a 2 pole motor with a 5mm shaft and a low kv rating. Overall appearance is good. I used it with a 2s set up. With a 16t pinion the motor got warm. Speeds were around 28mph. I would only recommend this motor for someone that has a 2wd car and is looking for better speeds over a stock motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this motor to use on a 4wd hpi mt2. It is a 2 pole motor with a 5mm shaft and a low kv rating. Overall appearance is good. I used it with a 2s set up. With a 16t pinion the motor got warm. Speeds were around 28mph. I would only recommend this motor for someone that has a 2wd car and is looking for better speeds over a stock motor.

  1. 1
  2. 2
Customer files
Ball bearing FAIL! Download [2606]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save