Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Sadler Vampir SV2 Glow Sport Modell Balsa 1500mm (ARF)

Sadler Vampir SV2 Glow Sport Modell Balsa 1500mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
SadlerVampire
WANT FREE SHIPPING? Click here to find out more!

Der Sadler Vampir SV2 ist ein Glühen angetrieben Sportmodell für Piloten der Suche nach etwas anders. Das verbaute Balsa / Sperrholz Flügel und Schwanz, zusammen mit einem GFK-Rumpf für seine Klasse dies ein sehr geringes Gewicht Modell machen. Fly langsam fliegen schnell, tun, was Sie wollen.

Der Vampir SV2 kommt als Almost Ready-Modell zu fliegen. Ein paar Abende der Arbeit der Installation des Motors und der Elektronik sind alles, was erforderlich, um dieses Modell in die Luft zu bekommen. Ein vorlackiertem Rumpf und Pre-Abdeckung Flügel und Schwanz Ihre Aufbauzeit zu beschleunigen. Fügen Sie die komplette Hardware-Paket einschließlich Kraftstofftank und Rädern, und wir haben die Notwendigkeit beseitigt lokalen Modell Laden zu führen, die alle diese Extras zu holen.

Eigenschaften:
• Almost Ready to Fly - komplette Endmontage, installieren Elektronik und Motor und Fly
• Vorlackierte GFK-Rumpf
• Erschlossen Balsa und Sperrholz Flügel, Ausleger und Schwanz
• Tricycle Fahrwerk mit lenkbaren Bugrad
• Flügel / Schwanz kommen in lebhaften Farbschema vorge bedeckt
• Komplette Hardware-Paket

Specs:
Spannweite: 1500mm
Länge: 1200 mm
Fluggewicht: 2400g
Flügelfläche: 39 dm 2

Erforderlich:
4-Kanal-Sender und -Empfänger
0,46 2-Takt-Motor Glow
7 x-Standard-Servos
Empfänger-Batterie
Misc Bauklebstoffe

  • Artikelbezeichnung SadlerVampire
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 4279.0000
  • Länge 840.00
  • Packaging Width 250.00
  • Höhe 360.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I just got this and I love the price. Of note is the landing gear rod lacking the end piece that prevents the landing wheel from coming off. The ones that with the kit are too small! I am putting a EMP C5055-700KV 1450W 3-8S 80A on this aircraft. Should push 122MPH.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just got this and I love the price. Of note is the landing gear rod lacking the end piece that prevents the landing wheel from coming off. The ones that with the kit are too small! I am putting a EMP C5055-700KV 1450W 3-8S 80A on this aircraft. Should push 122MPH.

nice looking plane and the directions are ok, But here is the flip side, DO NOT try to use the recommended servos as you will waste money just like I did. yes you need a full size servo for the ailerons which I am going to use 2 TGY 4409MD servos. The elevator and rudders are another thing. try using Corona DS238HV Digital Metal Gear will fit the pockets but remember your UBEC has to be set for 6 volts otherwise you may have difficulties running them. Do Not forget only use 2 TGY 4409MD for the ailerons DO NOT by all seven. I am also going to modify the wings to except retracts which after installing and testing I will let you know more. You buy a total of seven servos if you are building a gas model. I am doing electric and most likely 18.5 volts to start.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice looking plane and the directions are ok, But here is the flip side, DO NOT try to use the recommended servos as you will waste money just like I did. yes you need a full size servo for the ailerons which I am going to use 2 TGY 4409MD servos. The elevator and rudders are another thing. try using Corona DS238HV Digital Metal Gear will fit the pockets but remember your UBEC has to be set for 6 volts otherwise you may have difficulties running them. Do Not forget only use 2 TGY 4409MD for the ailerons DO NOT by all seven. I am also going to modify the wings to except retracts which after installing and testing I will let you know more. You buy a total of seven servos if you are building a gas model. I am doing electric and most likely 18.5 volts to start.

Bought this as listed for a 46 engine. The FUS is for an electric version. not GLOW, the firewall is a motor mount for a 50 sized electric motor, goes together very easily and there is plenty of room for batteries. You need a higher KV motor to give you a choice of smaller props to fit between the tail beams .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this as listed for a 46 engine. The FUS is for an electric version. not GLOW, the firewall is a motor mount for a 50 sized electric motor, goes together very easily and there is plenty of room for batteries. You need a higher KV motor to give you a choice of smaller props to fit between the tail beams .

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save