Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • Global
  • USA

Sbach 342 EPP 3D Flugzeug 900mm (KIT)

Sbach 342 EPP 3D Flugzeug 900mm (KIT)

QTY:

Now save Speichern 0,00 € 0,00 €

39,85 €
Stock:
Gewicht:
1150 g
SKU:
095000021

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
servo
motor
Product
Description

Super einfach zu bauen, um Spaß zu fliegen - Hard zu brechen! Diese drei Dinge summieren sich die EVP 3d Sbach auf.

Hergestellt aus super elastischen EPP und verstärkt mit Kohlenstoff Torsionssteifigkeit auf den Rumpf, Flügel und Steuerflächen zu addieren - diese 3D'er nehmen die rauen und von den angehenden 3D-Pilot während auch erfreulich ist für den erfahrenen 3D-Assistenten zu fliegen!

Montage aus der Box ist schnell und genau, vielleicht etwa eine Stunde zu montieren, installieren Sie Ihr Radio und Stromversorgungssystemen.

Sie erhalten einen 2212 1250Kv Motor, 20-30 amp ECS, 9x5 langsam fliegen Propeller und 4 Micro Servos benötigen, um Ihr Modell zu vervollständigen.

Specs:
Spannweite: 900 mm
Länge: 990mm
Fluggewicht: 420-490g (mit Batterie)

Benötigt:
Servo: 8-10g Mikroservo x 4
Radio: 4 oder mehr Kanal
Motor: 2212 1250Kv Brushless Outrunner
Propeller: Slow Fly 9x5
ESC: 20-30 Amp
Akku: 11.1V 1000-1200mAh Lipo 25C

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    095000021
  • Brand:
    Nein
  • Gewicht ( g)
    1150.00
  • Länge
    840.00
  • Breite:
    70.00
  • Höhe:
    270.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Very fun and no need long field for take off
Quality
Value
Overall
Quality
Value
Overall
good little 3d trainer. you can crash it as much as you want and you'll be still able to fly it again with minimum efforts. I start learning fixed wing flying on similar one (yak 54) just reduce the rates too much and it'll fly as easy as Cessna.

excellent. shipping weight could be little less to keep the price reasonable.
Quality
Value
Overall
Quality
Value
Overall
Great little plane, balanced perfectly out of the box, using the list below:-

Plane - sbach 342 kit
Motor - Turnigy D2836/8 1100KVA BL Outrunner
Servo's - 929MG Metal Gear Servo 12.5gm (bought 4)
Speedy - Turnigy Plush 25A (didn't have 30A in stock)
Batt - Zippy Compact 3S 25C 1300mAh (bought 4)
Connectors - Nylon XT60 M/F 5- pack (for speedy)
Bullets - PolyMax 3.5mm Gold Connectors (for speedy)
Prop - SF E-prop 10x4.7 (5-pack) (Tried 9x4.7's but too small)
Servo Extensions - I think I used some 30cm's I had around

Assembly :- I/we assembled this over a few beers with some mates. Took about 2 hours all up taking our time with no urgency. A couple of points to not to save some time :-
* Cut the servo horn extensions with side cutters so that the servo screw can be accessed even with the horn extension screwed to the horn.
* I put the rudder clevis on the inside of the servo horn on the rudder to try and keep the throw more linear.
* Use the rubber grommets and brass ferrels with the 929MG's, they'll screw neatly in to the plywood servo mounts with the supplied screws
* 929MG's in the wing were faced as per the instructions and the cable was 'just' long enough for the receiver
* 929MG's were turned around on the tail so the cable would go forward to gain some length
* The plane was assembled entirely with CA only. Kicker will interfere with the paint if you touch it before it
Quality
Value
Overall
Quality
Value
Overall
Just had the maiden today, flies ablolutely awesome!

Electronics:

- Turnigy DST 1200kV Motor

- Hobbyking Blue 30A esc

- HXT900 Servos (of course)

- 9045 Slowfly prop

- 1300mAH Lipo

The airframe was a breeze to build, instuctions werent bad and the rigidity of this thing is superb! Flies brilliantly with D/R (Ailerons: 40pcnt, Elevator: 40pcnt, Rudder: 55pcnt)



Would definately recommend, great work Hobbyking!
Quality
Value
Overall
Quality
Value
Overall
Fantastic plane, highly recommended. The motor mount is VERY strong, but predrilled holes didnt match ant of my motors. So I drilled the holes bigger & used cable ties to mount the motor. Mostly prebuilt, just glue on the wing & tail, add electrics & youre finished. Plenty of pre-installed carbon. USE METAL GEAR SERVO's . The slot for the landing gear is on a strange angle, I didnt use the small lading gear, just belly land it. Not as floaty or maneuverable the Reaktor, the wing may be a bit small for the plane, but can fly in wind & is very maneuverable . I think it should be fairley crashproof, great for me just trying to learn 3D.
Quality
Value
Overall
Quality
Value
Overall
Finally arrived today so opened with anticipation and guess wot a load of crock the 2 wing halves are different thicknesses shurley when they were glued together in the warehouse this would have been seen, its not the hard to see so i as who do they have working for themselves Monkeys i think.
Quality
Value
Overall
Quality
Value
Overall
A good 3D flyer, not as precise as a Reaktor. Neutral C of G 108mm back from LE of wing at root. 45 to 50 gram motor, 1200 to 1400 kv, APC 9 x 4.7 prop, 18 to 25 amp speedy, 9 gram servos all round with 3D arms, Nanotec 3C 950mah Lipo. 5 Min flight. 50pcnt expo on Ail & Elev None on rudder. Mine needed right thrust ( 2 washers) up thrust ( 1 washer).
Quality
Value
Overall
Quality
Value
Overall
Excellent plane, this was my first epp plane, I use a donkey 3007 1100kv, with 25A ESC, 10 x 4.7 propeller and a 1300 3S battery, and it's amazing, this is the plane that I always carry with me in my car because I know that I will fly wherever I go, not to mention that I fall 06 times and is still in great condition
Quality
Value
Overall
Quality
Value
Overall
This is my first Parklyer/3d plane, so cant compare it to others but this is an awesum plane for those on a budget, it's perfect for beginners like me and super fun for the more experienced Pilots (friends that are really good Pilots) they luv it!.. what it lacks in looks it makes up for in fun!.. Recommended

Quality
Value
Overall
Quality
Value
Overall
Awesome, Awesome, Awesome.
Using a Turnigy 980kv and a 9X4.7 slowfly, with a nanotech 3s 1300. Very precise and does exactly what you tell it to do. Extremely satisfied and would reccommend this airframe.
Quality
Value
Overall
View all reviews
Upload
Videos
  • Sbach 342 EPP 3D Airplane 900mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [154kb]
No File Name download now [3643kb]
No File Name download now [4794kb]

Combine

essential items and
esc
battery
servo
motor

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.