Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Servoeinfassung / Protektoren Weiß (1set / bag) 64mm x 67mm

Servoeinfassung / Protektoren Weiß (1set / bag) 64mm x 67mm

Shipped From:
  • Global

Now save Speichern 0,00 € 0,00 €

1,72 €
Alert me
Status:
Ausverkauft!
SKU:
OR020-00203
WANT FREE SHIPPING? Click here to find out more!

Servoeinfassung / Protektoren Weiß (1set / bag) 64mm x 67mm

Perfekt für Ihre Servos in die Flügel Montage, sie kommen mit dem Servohaltestange, ohne Leim oder Montageband notwendig. Geeignet für Standardgröße Servo 36g ~ 55g

Farbe: Weiß

  • Artikelbezeichnung OR020-00203
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht 25.0000
  • Länge 105.00
  • Breite 40.00
  • Höhe 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Would use them to cover & protect the servos under the wings DG600 but tey are a litllebit too big. I'll use them to modify some covers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Would use them to cover & protect the servos under the wings DG600 but tey are a litllebit too big. I'll use them to modify some covers.

These are very large compared to your standard light duty servo. Suitable for larger servos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are very large compared to your standard light duty servo. Suitable for larger servos

Great Mount, hard staff!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Mount, hard staff!!!

These are the best way to mount servos in the wings of models - these take standard type servos (I used futaba 3003's) and fit nice and neatly in the wing for easy installation and maintenance and positive control - highly recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are the best way to mount servos in the wings of models - these take standard type servos (I used futaba 3003's) and fit nice and neatly in the wing for easy installation and maintenance and positive control - highly recommend.

zeer goede afwerking en passen zonder probleem op een cularis mpx

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

zeer goede afwerking en passen zonder probleem op een cularis mpx

The distance from Servo to the extension where the arm is located is way too short. Even a standard servo doesn't fit since the distance from flange to servo arm underside is way too close to the servo arm cover. I tried 4 different standard servo and non fits. That's frustrating since the over all quality is not that bad. A little flexible but good for most apps.
Make sure you tape the servo with double sided glue tape to the bottom of the servo slot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The distance from Servo to the extension where the arm is located is way too short. Even a standard servo doesn't fit since the distance from flange to servo arm underside is way too close to the servo arm cover. I tried 4 different standard servo and non fits. That's frustrating since the over all quality is not that bad. A little flexible but good for most apps.
Make sure you tape the servo with double sided glue tape to the bottom of the servo slot.

For use with full sized servos. The protection bit at the top is also very tall, not the most aestheticly pleasing cover but if you have long control horns would work great

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For use with full sized servos. The protection bit at the top is also very tall, not the most aestheticly pleasing cover but if you have long control horns would work great

Wenn sie berlackiert sind, siht man die Servos kaum noch

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wenn sie berlackiert sind, siht man die Servos kaum noch

fit well with mini servo, will use it on the flaps on my falcon 120 with mg16 hk servos and on elevator with corona servos.
It's better to glue servo to make covers solid

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fit well with mini servo, will use it on the flaps on my falcon 120 with mg16 hk servos and on elevator with corona servos.
It's better to glue servo to make covers solid

Might seem a little flexible but use double sided tape when fitting the servo and they become quite rigid. Have yet to find a way of getting paint to stick for long.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Might seem a little flexible but use double sided tape when fitting the servo and they become quite rigid. Have yet to find a way of getting paint to stick for long.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!