Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

SK BLITZ 480 Quad-Copter Frame (Kit)

SK BLITZ 480 Quad-Copter Frame (Kit)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
931 g
SKU:
426000039-0
WANT FREE SHIPPING? Click here to find out more!

SK BLITZ 480 Quad-Copter Frame (Kit)

Der SK-Blitz ist ein stabiles Quad als Kameraplattform zu nutzen. Es kommt mit starken, leichten, Glasfaser Arme und Rahmen. All dies in einer großen Größe Rahmen mit einem 480mm Radstand. In kommt mit einem integrierten Energieverteiler Ihre Verkabelung ordentlich zu halten. Darin enthalten ist ein 5V 3A BEC sowie ein integrierter in XT60 Batteriestecker.

Dies ist ein einfacher Rahmen mit allen wichtigen Teilen mit vorgeGewindeHülsen mit Montage und Ausrichtung zu helfen, zu bauen. Keine der Suche nach diesen selbstsichernden Muttern auf dem Boden. Um Hilfe bei der Orientierung in Tag und Nacht gibt es LED-Streifen für jedes Bein zu helfen, erhalten Sie in die richtige Richtung gehen.

Die Glasfaser Arme sind mit 16, 19 und 25 mm Motor Löcher, die Sie 10 bis 12-Zoll-Propeller laufen können. Die nach oben geneigte Arme helfen große Stabilität der Plattform geben. Eine einstellbare Batterie und Kamera Kardan-Halterung können Sie die Gewichtsverteilung optimal einzustellen. Verschiedene Kardanringe kann leicht an dem Rahmen befestigt werden.

Ein ausgezeichnetes Universalrahmen zum richtigen Preis. passen Sie einfach Ihr Gang und Sie werden Ihre nächste Drama mit Leichtigkeit filmen.

Eigenschaften:
• Integrierte von Qualität Glasfaser und Polyamid Nylon
• Pre-Gewindemessinghülsen für alle Rahmenschrauben
• Upswept Arme für Stabilität
• Super helle LEDs an jedem Arm zur Orientierung
• Integrierte PCB-Verbindungen zum direkten Einlöten des WSR
• Einfache Montage
• Built-in XT60 für Batterie-Eingang

Specs:
Radstand: 480mm
Höhe: 190 mm
Gewicht: 510g (einschließlich BEC und Beleuchtungssystem)
BEC Eingangsspannung: 8 ~ 28V
BEC - Ausgang: 5V 3A
Motormontagelöcher Schraube: 16 ~ 19 ~ 25mm

im Lieferumfang enthalten:
1 x SK Blitz 480 Rahmen-Kit
1 x-Handbuch

Erforderlich:
4 x 28mm 800 ~ 1000KV Motoren
4 x 20 ~ 30A Drehzahlregler
4 x 10-12inch Propeller
1 x 2200mAh 3S 11.1V zu LiPoly Batterie oder mehr
1 x Flight-Controller
5 ~ 6-Kanal-Radio und Empfänger
Kamera und kardanisch (optional)

  • Artikelbezeichnung 426000039-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 931.00
  • Länge 285.00
  • Breite 55.00
  • Höhe 200.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Loved the integrated nature of the electronics, but the SK Lightning is a bit fragile and there are NO SPARE PARTS! Broke an arm on the first crash and now I have a useless frame because I can't get a replacement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Loved the integrated nature of the electronics, but the SK Lightning is a bit fragile and there are NO SPARE PARTS! Broke an arm on the first crash and now I have a useless frame because I can't get a replacement.

These frames have lots of nice features, but there are some deficiencies.
1. The landing gear legs are VERY fragile. Even a minimally hard landing, especially if the vehicle is drifting at all, they fracture at the notch adjacent to their mounting plate. Fortunately, replacements are available at minimal cost (spare S500 landing gear legs), but they still break too easily. I tried reinforcing the upper surface across the notch by gluing carbon fiber strips with both epoxy and CA, but they didn't stick, even though I roughed up the upper surface of the leg with sandpaper. Plan B is to wrap the upper 4 cm of each leg with 2 oz fiberglass adhered with CA, so I'll see how that works as soon as today's snow melts and the wind dies down.
2. The capacitors on the bottom of the LED and power distribution boards are attached only by their connecting wires, so they dangle below the lower deck. The fix for this is easier with hot melt glue.
3 The translucent covers for the LED strips seem to be pretty brittle. Two of mine fractured. I don't know when it happened, but my quad hasn't had any bad crashes, and they shouldn't break with hard landings or simple tip overs.
Otherwise, the kit goes together well and everything else works

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These frames have lots of nice features, but there are some deficiencies.
1. The landing gear legs are VERY fragile. Even a minimally hard landing, especially if the vehicle is drifting at all, they fracture at the notch adjacent to their mounting plate. Fortunately, replacements are available at minimal cost (spare S500 landing gear legs), but they still break too easily. I tried reinforcing the upper surface across the notch by gluing carbon fiber strips with both epoxy and CA, but they didn't stick, even though I roughed up the upper surface of the leg with sandpaper. Plan B is to wrap the upper 4 cm of each leg with 2 oz fiberglass adhered with CA, so I'll see how that works as soon as today's snow melts and the wind dies down.
2. The capacitors on the bottom of the LED and power distribution boards are attached only by their connecting wires, so they dangle below the lower deck. The fix for this is easier with hot melt glue.
3 The translucent covers for the LED strips seem to be pretty brittle. Two of mine fractured. I don't know when it happened, but my quad hasn't had any bad crashes, and they shouldn't break with hard landings or simple tip overs.
Otherwise, the kit goes together well and everything else works

I highly recommended this product, you can't go wrong for the price. Overall quality is excellent and the parts should stand up to some abuse. The assembly instructions are easy to follow and everything went together without any problems. The electronic components incorporated in the frame are of high quality and worked as stated. The LED strips in each arm are very bright and are adjustable via a push button.

ONLY CON - I just wish HobbyKing would provide spare parts for this kit , which is a bit of a worry.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I highly recommended this product, you can't go wrong for the price. Overall quality is excellent and the parts should stand up to some abuse. The assembly instructions are easy to follow and everything went together without any problems. The electronic components incorporated in the frame are of high quality and worked as stated. The LED strips in each arm are very bright and are adjustable via a push button.

ONLY CON - I just wish HobbyKing would provide spare parts for this kit , which is a bit of a worry.

Customer files
Frame manual diagrams Download [51]
Main board Download [247]
Kit parts Download [227]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save