Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren

Skyfun Jet (Kit Only)

Skyfun Jet (Kit Only)

Now save Speichern 0,00 € 0,00 €

49,10 €
Ausverkauft!
Stock:
OUT OF STOCK
Gewicht:
1689 g
SKU:
Skyfun-kit

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
servo
motor
acc
Product
Description

Die skyfun kann durch Anfänger und fortgeschrittene Piloten gleichermaßen verwendet werden. noch eine langsame Stall Rate Bereitstellung Herzgeschwindigkeit Stampfen ist die skyfun ein Park-Jet Sie überall hin mitnehmen wollen.
Hergestellt mit Hochdruck-EPS und einer polierten Form ist die skyfun extrem steif, hat einen Glanz wie Oberfläche und doch sehr Crash beständig!

Spezifikation:
Spannweite: 875mm
Länge: 700 mm
Höhe: 170 mm
Motor Mount Löcher: 19mm oder 16mm
Trockengewicht: 302g (ohne Elektronik)
Motor: 28xx-1800kv Brushless Outrunner (Erforderlich)
Motor Mount Löcher: 19mm oder 16mm
ESC: 25A (Erforderlich)
Servo: 2 x 9g (Erforderlich)
Prop: 6 x 4 (2 im Lieferumfang enthalten)

Erforderlich:
28xx-1800kv Brushless Outrunner
25A ESC
2 x 9g Servos
Ihre eigene TX & RX
Batterie 1800 ~ 2200mAh 11.1V 3S 20C oder höher

Hinweis: Für ein leistungsfähigerer Setup die folgende versuchen.

Motor: Turnigy 2836-2350kv
ESC: Turnigy Plüsch 60A
Batterie: 1800mAh 4S1P 35c Turnigy Nano-Tech Lipo Akku
Prop: 6x4 Sport

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    Skyfun-kit
  • Brand:
    Nein
  • Gewicht ( g)
    1689.00
  • Länge
    750.00
  • Breite:
    195.00
  • Höhe:
    440.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Nice foamy kit and almost finished the build. Using a Turnigy 2200kv with 6x4 prop on 3S 2200 lipo. Draws around 26A and 280W, so a good setup to start with. There was slight wing damage from the packing, definately more foam in the box than what the Skyfun is built with. My elevons were also poorly taped at the hinge joint, one was high and the other low so rather than risk it I have made two new ones from balsa and will use proper hinges. Also added carbon spars to the channels under both wings for added strength. Everything else looks nicely done and they even had two props in the kit with a rather cheesy prop adapter which doesn't fit the Turnigy shaft anyway. I've fitted trusty HXT900 9g servos and with a bit of modifying using heat, the plastic protective covers will fit although I'll tape them in place rather than using glue. Added a fairly decent magnet to the front of the canopy as I believe it decides to part company in some cases.Looking forward to the maiden and possibly running gear upgrade at a later stage. Looking good so far with plenty of room up front
Quality
Value
Overall
Quality
Value
Overall
Betreibe den SkyFun mit einen 80er WeMo Impeller mit ca. 3.2 kg Schuh und 6S 4000er Lipo. Die max. Geschwindichkeit liegt damit bei ca. 230-240km/h. Der Jet ist damit Schnell und durch die Delta Form doch sehr gut mtig unterwegs.
Der Bausatz muss bei solchen geschwindichkeiten allerdings komplett mit GFK beglast und CKK Stben versteift werden, ist dann aber voll Altagstauglich, weil auf kurzem Rasen Bodenstart fhig.
Quality
Value
Overall
Quality
Value
Overall
5 star rating again for the i d i o t that rated it 1 star. This kit needs work, but it's on of the best flying airframes in this format.
Quality
Value
Overall
Quality
Value
Overall
I bought the PNF version and fell in love with the model so I bought a new kit to pimp out with more powerful electronics. This model is excellent at high speeds as well as low speeds!
Quality
Value
Overall
Quality
Value
Overall
OK for the money. Weighs 525 grams all up including added wheels and 1000mah 3 cell, with Turnigy 28261400kv motor and 7x6cut to 6x6 prop producing 170w 15amp max. Decals poorly applied, elevons badly set, cut them off and made balsa ones. Lots of moulding flash needs sanding down. Clear canopy glued just at front and back only, take it off and reglue before you loose it. It would have been better if decals were on a sheet, canopy was supplied loose, elevons & hinges supplied loose and glue was supplied with kit.
it must be cheaper for the supplier rather than paying for poor assembly.
Quality
Value
Overall
Quality
Value
Overall
Havent flown it yet, but I didnt really like the tape hinges and the fuselage seems to be of faulty design, as most of its space is useless if you dont plan to carry only foam with you. 90 percent of the fuselage space is located in front of the CoG...the wings are placed too far back in relation to the fuselage. I think the Funjet has a smarter design
Quality
Value
Overall
Quality
Value
Overall
Great plane for the price, yet to maiden it but am pleased with the quality of the model. The foam is more of a packaging type foam but should hold up fine. I installed several carbon fibre rods to reinforce the wing and motor mounting area as will be running a 2300kv motor out of an efx racer, however the factory done hinges are simply fibreglass reinforced tape and will need replacing if using a high speed set up (in my opinion!) i will be running a 6x4 prop on 3s 2200 packs, model is super lightweight and the thrust to weight ratio should make for a superb flying model!
Quality
Value
Overall
Quality
Value
Overall
Great fun, when upgrades are done for the fast setup, ailerons are very flimsy so i have made some out of balsa and covered, The motor fell off first flight so check bolts on the bottom use loctite. the clear screen part of the canopy fell of just a case of gluing that back on, the wings bend up on high maneuvers so i put a balsa bracket over the esc wires at the back, i will upload some pictures of finished upgrades, Overall very fast not bad for the price just have to spend a fun day modifying
Quality
Value
Overall
Quality
Value
Overall
I've just assembled it, the fit of the wing to the main body is pretty slack with gaps on both sides, heaps of glue and fibre tape fix's that problem, no carbon rods were supplied with the kit luckily I had some 2.5mm solid carbon which I used, the servo covers in the kit were too shallow to cover the servo's, found this out after I glued the servo carrier in, I should have mounted the servo's from the top, it would have been easy, had to make my own servo protection seeing as the servo arms are on the bottom of the plane a very prone position, I've put fibre tape over all the glue joints so I expect it to hold together pretty well, It fly's a dream, I used a 2200kv with a 6x5.5 prop, the plastic motor mount turned out to be painted alloy, it looked and felt like plastic till I drilled a hole out for a bigger screw and it was alloy, with such stable flying I think even being eps, (very smooth eps it looks like epo) this plane should have a good life span :-)
Quality
Value
Overall
Quality
Value
Overall
Not happy with it being eps, but after seeing them fly on youtube I had to get one, there's more foam in the box for transport than what's in the plane! all looks good except for the plastic motor mount may have to make a better one out of light alloy
Quality
Value
Overall
View all reviews
Upload
Videos
  • Chasing Skyfun II with Team Maulwurf

  • Short testflight of a Skyfun

  • Skyfun Chasing - FPV

Upload video
Upload
Files

Combine

essential items and
esc
battery
servo
motor
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.