Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Brushless Inrunner Motor 3674 2250KV (1:10th - 540)

Generating Links

Brushless Inrunner Motor 3674 2250KV (1:10th - 540)

Preis:

Now save speichern 0,00 € 0,00 €

24,23 €
Versendet aus:
  • USA
  • Global
Bereits gekauft
Voraussichtliche Ankunftszeit: Keine Voraussichtliche Ankunftszeit [ ? ]
Status:
Ausverkauft!
SKU:
9912000006-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Features:
• Hand wound for maximum copper fill
• Precision balanced rotor, boost's the efficiency and performance of the motor
• Nickel-plated neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions

Specs
Kv: 2250
Max Current: 80A
Max Power: 1800
Idle current: 4A
Resistance: 0.0076
Shaft: 5mm
Weight: 305g
Suggested ESC: 120A
Input Voltage: 7.4-14.8V (2-4 cell LiPoly)
Bolt Hole Spacing: 25
Bolt Thread: 3
Connector Type: 4mm Bullet-connector

  • Kv (rpm / v) 2250.00
  • Max Current (A) 4.00
  • Widerstand ( mh) 0.01
  • Max Spannung (V) 4.00
  • Leistung ( W) 1800.00
  • Welle A ( mm) 5.00
  • Länge B (mm) 91.00
  • Durchmesser C (mm) 36.00
  • Kann Länge D (mm) 74.00
  • Gesamtlänge E ( mm) 91.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Chris | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Works as expected on an old RC

Mar 03, 2021

Works as expected on an old RC10T2 truck. Replaced the brushed motor with this one. I also purchased a 120A Speed Controller for it. Pretty slow on 2S. Will try 3S and see how it performs. Motor can handle 4s but speed controller only good for 3S. Running very cool with 17/87 Gearing.

Paul Panzer | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Super Spitzen Ware

Jan 21, 2021

Wiedermal ein HK Produkt was vorbehaltslos zu empfehlem ist,weiter so

Onkel Hotte | Verifizierter Käufer

  • Quality
  • Overall
  • Value

TOP Teil

Jan 16, 2021

Super Teil zum Top preis...jederzeit gerne wieder.

Onkel Hotte | Verifizierter Käufer

  • Quality
  • Overall
  • Value

TOP Teil

Dec 03, 2020

Sehr gute qualität zum spitzen preis...

Jimmy | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Works great in my basher

Jun 05, 2020

I was pleasantly surprised with the power of this thing in my 1/8 basher truggy

Josh | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Great wee motor - goes good

Jun 17, 2019

No issues runs great.
Just posting this review as I see stefan can't get it working. no idea why he's on a 40A esc.. for a motor like this you'll be wanting a big one. I run a 120A esc with this motor and have pushed it hard (over its current rating). No issues yet. Be aware though, if you do get water into the motor there is bare metal (winding cores) in there that can start to corrode.

Josh | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Great wee motor - goes good

Jun 17, 2019

No issues runs great.
Just posting this review as I see stefan can't get it working. no idea why he's on a 40A esc.. for a motor like this you'll be wanting a big one. I run a 120A esc with this motor and have pushed it hard (80+ amps). No issues yet. Be aware though, if you do get water into the motor there is bare metal (winding cores) in there that can start to corrode.

Stefan | Verifizierter Käufer

  • Overall
  • Value
  • Quality

Simply not working

Feb 26, 2019

I searched for a simple and cheap way to get rid of my combustion motor in my REELY Car. Sadly this motor does not want to run with any controller i got.
For example a Hobbyking ubec 40A.
The Problem seems to be the Fact that the inductivity of the motor is more or less zero.
We tried another controller and the motor turned but loses sync at a few hundred rpm.
only way we got it running whith a small controller was to use small spules as inductivity. but this was just a test and inside a rc model there is simply not the space for spules that can hold 40 or more Amps.
The other sad thing is that i am not able to find any further information about this motor on the internet

Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Related Tags

Zubehör