Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Sprint F3 Fiberglas Tunnel Hull Brushless Rennboot w / Motor (630mm)

Generating Links

Sprint F3 Fiberglas Tunnel Hull Brushless Rennboot w / Motor (630mm)

Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9194000002
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der Sprint F3 ist das Ergebnis mehrerer Jahre Design-Tests und Entwicklung eine in hohem Maße wettbewerbsfähige, Rennen bereit Tunnel Hull zu schaffen, die sich nicht selbst bauen erfordert. Die innovative Außenbordmotor-Setup wird von einem drehmomentstarken Brushless Outrunner Motor angetrieben zu einer Flexwelle Direktantrieb verbunden, um die Stütze welche Kräfte.

Die Glasfaser-Arbeit ist erstklassig, so dass für eine glatte Oberfläche ohne Mängel. Die Farbe und Aufkleber wurden mit einer abschließenden Klarlack glänzend fachmännisch aufgetragen entlang der Oberfläche zu versiegeln. Die Farbgebung ist hell, scharf und sehr detailliert.

Die Leistung ist wirklich das, was die Sprint F3 geht. Die vorinstallierte 3000KV Brushless Outrunner Motor liefert große Mengen an Energie an der Stütze. Der Außenbord Setup kommt als komplette Einheit, die einfach auf den Rumpf für die schnelle Montage / Demontage ermöglicht Schrauben auf. Wasserkühlung wird vorinstalliert.

Eine Batteriemontageplatte ist vorinstalliert sowie eine Servohalterung. Die Servo Schrauben einfach an Ort und Stelle für eine sehr einfache, aber sichere Installation zu machen. Das Batteriefach ist groß und wird eine große Auswahl an Packungsgrößen anzupassen.

Eigenschaften:
• Schön fertig Fiberglas-Rumpf
• Innovative Außenbordmotor Design
• Authentische Rennen inspirierte Farbgebung
• Leistungsstarke 3000KV Brushless Läufer-Motor
• Lage extreme Geschwindigkeiten
• Hochwertige Hardware im Lieferumfang enthalten

Specs:
Rumpflänge: 630mm
Breite: 295mm
Höhe: 150 mm
Motor: 3000KV Brushless Outrunner (vorinstalliert)

Benötigt:
60 ~ 90A Brushless Wassergekühlt ESC
Standardgröße 3kg + Servo
2-Kanal-Sender und Empfänger
3S 2200 ~ 3000mAh LiPoly Batterie

  • Race Boat
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

wade | Verifizierter Käufer

  • Overall
  • Value
  • Quality

Good for beginner

Apr 15, 2018

Good for a begginer as its not very fast out of the box. I ran it on a zippy compact 3s 2200mah 60c lipo. Motor mount was glued in place which took a bit of force to get it to come loose to adjust the outboard.

Mark | Verifizierter Käufer

  • Overall
  • Value
  • Quality

Exceeded Expectations

Apr 11, 2018

This boat exceeded expectations, the finish and quality of the boat and motor is VERY good. The hull finish is beautiful with all the decals nicely applied and the gloss clear finish is very smooth, tough and clear.
The motor is nicely made and appears very solid, follow advice and grease the shaft regularly and you will have no problems.
This boat is fantastic value for the price and i am so glad i bought one, lots of fun...

kathleen | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Sep 09, 2016

Nicely moulded hull with a great high gloss finish. A good looking boat. However, be warned,
the steel shaft seized in the "brass" bush locking up the propeller after 30 secs running.
This caused the motor to burn out. There was no sign of oil or grease anywhere inside the outboard assembly, very poor quality control. Hobby king would not entertain my complaint unless I submitted a video. Of a seized outboard motor, really !!.
A replacement motor (scorpion) and upgraded shaft and bush from TFL Germany solved the issue at great cost. The boat performs beautifully now, but this has been a very expensive exercise. If you purchase this boat, before you do anything, strip the outboard and grease/oil the solid and flexi shaft.

olivier | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 24, 2015

Vraiment une magnifique coque :)
Premier run en 4S 5500mA avec un ESC Hobbyking 90A, a trace dj pas mal et suffisamment pour le retourner.

JDspecial1 | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

May 01, 2015

This boat is much nicer than I expected. The outboard system is amazingly machined and detailed. The only problem I've run into so far is the motor wire insulation wore away and the salt water I'm running in shorted the motor and burnt it up. It's pretty quick out of the box. I've upgraded to the turnigy hk 2865 -2900kv on 4s w 160A aquastar spinning a 335-3 prop. Patiently waiting for the right conditions to test this setup. I'll will let you all know. Overall, great value.

sean | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 22, 2015

I grabbed this boat when it was on sale for $140 aus.
installed a 120amp hobbyking esc and I use a turnigy 4s 4000mah 40c lipo.
the boat has done about 6 packs of run time and it works very well, checked it on the gps and it pulled a run of 71kph, great hull im very happy with it. motor temp was around 35c and esc was 45c with the lipo also at 45c.

valiantGLX | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 20, 2015

When I unboxed mine there were screws and hardware loose in both the box and hull, luckily I could find everything. Where the hatch connects to the nose is a joke, it requires modifications before running. Instruction manual is next to useless, doesn't even tell you how to grease the outboard. Also nothing is properly sealed at the back. However this boat handles speed runs like it i on rails, on 3s it is pretty fast and on 4s it is insane. I run with my prop angled down slightly on 3s and a bit further down for 4s. I had a shaky start with this boat, but now I love it, it is my go to RC at the moment. I have heaps of youtube vids, and a discussion thread on RCgroups, look me up, ValiantGLX

| Verifizierter Käufer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 09, 2014

Looks really nice. Unfortunately UK seems not to be part of EU for some, as I needed to send it with a help of friends.

Midnightsun | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Oct 06, 2013

I have had some time now with this boat and am extremely pleased with the overall package. Finish on this is next to none, beautiful. Lots of room inside for a 24" hull as the motor is obviously on the back. Have upgraded to a Turnigy Typhoon 3450 running twin 5800 Nano tech packs for a total of 4S to the motor. Also upgraded the prop to a CNC 32mm x 1.7. Getting about 10 mins run time and a maximum speed of 48mph with the mods. Batteries need to be as far forward as possible and drive needs to be trimmed so it is slightly down. Remove the drive shaft and grease after every run, also add a few drops of oil to the oil fitting as this keeps the strut bushing lubricated. This is one fast well built boat.

Dave | Verifizierter Käufer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 16, 2013

Great boat. Run well the very first time. It only needs just a few minor tweaks otherwise well worth the money

  1. 1
  2. 2
Kundendateien
HK Outboard Motor Download [124]
Outboard motor Download [61]
No File Name Download [47]
hull from below Download [49]
hull from below Download [49]
hull from front Download [37]
hull from below Download [49]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!