Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Super-3D-Flachform EPO-R / C Flugzeug w / Brushless Motor

Super-3D-Flachform EPO-R / C Flugzeug w / Brushless Motor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
696 g
SKU:
3D-Hawk80
Product
Description
Super-Kunstflug, und sehr stark. Das EPA 3D-Flachform wird für Parkfly große 3D gebaut. Jeder kann lernen, mit dieser Ebene zu schweben, Harrier und Messerkante!
Wir haben die entsprechenden ADH300L Brushless Motor und 8x4 Propeller für Sie enthalten, so dass alles, was Sie brauchen, ist ein 10A ESC und 3 x 5 g Servos ist, Ihre eigene tx / rx und eine Packung 500mAh 2S bereit zu sein, zu fliegen!
Spec.
Rumpflänge: 842mm
Spannweite: 800 mm
Fluggewicht: 310 - 350 g
Motor: ADH300 Brushless Outrunner (im Lieferumfang enthalten)
Propeller: 9x5 (im Lieferumfang enthalten)
 
Notwendige Grundlagen
Servos: 3 x 9g
ESC: 20A ESC  
Akku: 11.1V 3s1p 1200mAh ~ 1500mAh Lipo Akku
Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    3D-Hawk80
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    696.00
  • Länge
    830.00
  • Breite:
    40.00
  • Höhe:
    290.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I'm in the process of my build and after I had installed the rudder horn in the precut slot I found the C.F. push rod interfered with full elevator travel. I had to remove the rudder horn and move it up about 3/4". Did I route my push rod the wrong way?
Glenn
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The plane took about 3 hours to assemble; loved the stickers! What a selection. Was a little uneasy with the carbon tube, Z hook and heat shrink but it appears to work. Didn't have any foam safe so put it together with hot glue; worked fine. Set the CG about 25 mm behind the carbon spar. The plane flew right off the board. It was a delight to fly and on the first flight did a tail walk, loops, hover, knife edge but got a bit cautious when I saw the wings flexing! Might beef that up with some CF spar or something or wing braces; not sure yet. But hey, it is cheap and it flies and it is fun. Would like a U/C though...think on that I will. Good bang for bucks and a fun bird.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Still flying great after one year
great first plane.
I will buy another one after a few more crashes.
I use a 9x 4.7 prop - works great
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What an awesome plane! Flying great good to learn ! And durable as nails !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Achet depuis 3 mois maintenant , cet avion me donne entire satisfaction .
Il est trs robuste , si il y a une grosse chute , de la colle et c'est reparti .
J'ai un esc de 20A , une lipo 1300 mAh , un bon compromis entre puissance et poids .
Je vole entre 10 et 15 min suivant le style de vol
J'ai rigidifi les aile avec un fil car elles sont un peu trop souple mon gout .
Ne pas hsiter une seconde sur cet avion , idal pour commencer et continuer la 3D Outdoor pour moi .

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Flew this yesterday - oct 2012
Hxt500 on rudder and elv
Hxt900 on wings
1000mah 3cell
20amp esc
First 3d foam plane. Went straight from the sim to this with no issues
Flys very good. Take your time with the setup.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good plane for the price. you cant hover with it cause its to unstable. when you try to harrier the wings wanna rock back and forth excessively.
but i guess for $30 you cant expect the perfect plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Debutant dans la 3D , mais ayant de bonnes bases dans les planeurs et autres , je me suis lanc dans l'achat du flatform 3D , la construction reste simple bien qu'il faille avoir l'envie et la patience de bricoler car tout est a faire , seules les dcoupes sont deja faite . assemblage du fuselage , des ailes , scotch des ailes et drives ( vous avez bien lu , les articulations sont faites au scotch ( j'ai utilise un autre scotch arm car celui fourni me semble peu solide a la longue ) l'hlice fournie avec le kit est demesuree et surtout mal equilibree donc j'utilise une 7X6 qui va trs bien avec mon esc 20 A et la lipo 1200 mAh en 3S
L'avion est bien conu , d'une puissance acceptable pour la 3D ( une monte verticale lui fait pas peur )
Solidit car tres souple ( petit bemol pour la fixation moteur un peu fragile )

Je pense que cet avion est parfait pour dmarrer en 3D , beaucoup de bricole , prix tres acceptable

Encore un bel article que nous propose HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pretty happy with this plane so far. Flown it a few times. I taped all the edges with clear shipping tape. Also added cross bracing with carbon rods. Cross bracing and not a wing spar makes the plane much more rigid, way too floppy otherwise. 500 mah seems a little too light and 1300 mah 3s seems a little too heavy. Fun, cheap, flys good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received mind all was great until plug in the motor,pcnt#*&pcnt Got a bad motor, man that sucks - what can you do?
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
manual download now [296kb]

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.