Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Switchblade 200 Folding Mini FPV Quad-Copter (200mm) (KIT)

Switchblade 200 Folding Mini FPV Quad-Copter (200mm) (KIT)

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 7,37 € 7,37 €

Special Price 8,70 € 8,70 €

You save Speichern 7,37 € 7,37 €

Was  16,07 €

Status:
Auf Lager
SKU:
366000016-0
WANT FREE SHIPPING? Click here to find out more!

Der Switchblade 200 ist ein alle Verbundkonstruktion 200mm baumumarmen Rennen FPV Quadcopter. Der Switchblade hat, was eine saubere und unsaubere System genannt wird, die Vibrationen Fingerhüte verwendet Motor zu isolieren und Schwingungen vom FC und Kamera stützen. Die Clean-and-Dirty-System können Sie straffer PID laufen und haben eine Gello kostenlose Video-FPV-Sitzung. Genau wie der Name schon sagt, klappen Sie die Arme nach innen, nur 62mm breit für den Transport zu machen!

Die Arme Unterstützung Motor von 16x19mm und 12mm Abstand Montage. Die max prop Größe ist 5 Zoll und eignet sich perfekt für die 1704 ~ 2206-Klasse-Motoren. Die robuste Verbundkonstruktion kommt mit vielen Einrichtungen für die Montage und Riemen, eine Schnapp machen installieren. Der Rahmen verfügt über 8 Vibrations Fingerhüte zur Isolierung sowie eine neue zukunftsweisende FPV Kamera zwischen den Rahmen montieren. Der Switchblade hat einige schlanke Optik mit heißen roten eloxiertem Aluminium Standoffs und kühlen mattes Finish, das ist ein großes kleines Quad machen Ihren lokalen Flugplatz zip herum, und die Gelenkarme machen dies zu einem der am meisten tragbaren Mini-Quads zur Verfügung!

Eigenschaften:
• Composite-Konstruktion
• Große Auswahl an Motor und Leistungsoptionen
• Große sekundäre Schwingungsisolationsrahmen für mehr Raum und einfacher Layout
• Kompakte Größe für die Nähe von Hindernissen fliegen
• Klapparme für einfachen Transport

Specs:
Radstand: 200 mm
Gewicht: 150g
Höhe: 56 mm mit ausgefahrenem Fahrwerk und Mitte Käfig

Erforderlich:
4 x Motors 1506 ~ 2208
1 x Batterie 800 ~ 1300mAh 7.4 ~ 11.1V (2 oder 3 Zellen Lipo)
4 x Propellers bis 5in
4 x WSA 7 ~ 12A
1 x Multirotor-Flugregler
4-Kanal-Radio (6-Kanal empfohlen für FPV und FC Verwendung)
FPV Getriebe (optional)

  • Artikelbezeichnung 366000016-0
  • Brand Unknown
  • Kapazität ( mAh) -
  • Gewicht 206.0000
  • Länge 210.00
  • Breite 30.00
  • Höhe 110.00
  • FPV250 Low Hung
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It's a good but little awkward frame. I have found the folding part being very impractical and personally when I used this frame I just left the arms unfolded. You really need to get some sort of thread locker for the frame since the constant small vibrations while flying WILL undo the screws and you're going to have a bad time. Other than that, if you want a hanging style frame this is a good pick.

TL;DR Good frame if you like the design.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a good but little awkward frame. I have found the folding part being very impractical and personally when I used this frame I just left the arms unfolded. You really need to get some sort of thread locker for the frame since the constant small vibrations while flying WILL undo the screws and you're going to have a bad time. Other than that, if you want a hanging style frame this is a good pick.

TL;DR Good frame if you like the design.

Like other people have said, making the whole cage dampened creates unnecessary oscillations for the camera. I have to zip tie the cage to the top plate so it's stiffer. The frame is decent quality, but a little heavy for my setup (mutlistar elite 2204, afro 12A 5030 GF prop, kk2.1 mini, mobius, 600mw fpv transmitter, turnigy 1000mah 3s). It flies pretty fast since it's on 5in props, but it needs ~65pcnt throttle to hover so it lacks punch out power. Maybe I need to get some higher C batteries.
That aside, the folding mechanism is pretty neat. Would prefer a screw-less folding mechanism like the trifecta or the HK H-quad 240. But at this price point I can't complain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Like other people have said, making the whole cage dampened creates unnecessary oscillations for the camera. I have to zip tie the cage to the top plate so it's stiffer. The frame is decent quality, but a little heavy for my setup (mutlistar elite 2204, afro 12A 5030 GF prop, kk2.1 mini, mobius, 600mw fpv transmitter, turnigy 1000mah 3s). It flies pretty fast since it's on 5in props, but it needs ~65pcnt throttle to hover so it lacks punch out power. Maybe I need to get some higher C batteries.
That aside, the folding mechanism is pretty neat. Would prefer a screw-less folding mechanism like the trifecta or the HK H-quad 240. But at this price point I can't complain.

best backpack quad ever

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

best backpack quad ever

nice, light, short quad will add video after maiden,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice, light, short quad will add video after maiden,

Nice idea, but dampening the whole FPV cage really asks for problems as it will oscillate the vibrations. Only separate components like the recording camera and flight controller need dampening. This kit in a reigid version would be much more functional.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice idea, but dampening the whole FPV cage really asks for problems as it will oscillate the vibrations. Only separate components like the recording camera and flight controller need dampening. This kit in a reigid version would be much more functional.

Customer files
My quad Download [2333]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save