Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Zieldrohne Fiberglas FPV Plattform 1520mm (ARF)

Zieldrohne Fiberglas FPV Plattform 1520mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1450 g
SKU:
189000058

Combine

essential items and
esc
battery
servo
motor
acc
Product
Description

Die Zieldrohne ist eine große kleine FPV-Plattform, die für den Job speziell entwickelt und wurde nicht nur ist der Kit billig, diese große kleine Modell zu kaufen ist auch billig in die Luft zu bekommen.

Die Zieldrohne verfügt über einen FG Rumpf, der an der Front für die Kameramontage geöffnet ist, gibt es auch eine Blendabdeckung eingebaut. Das Modell für einen Schiebermotor ausgelegt ist, wie man erwarten würde, und es verfügt auch über eine Mitte angebracht ist, große Luke für Batterie und Ausrüstung Zugang, die große und offene Rumpfbereich hat für die FPV Ausrüstung viel Platz nicht nur und LiPoly, sondern bietet auch viel Batterie und ESC Kühlung aus dem offenen vorderen Rumpf. Der Unterwagen ist robust, mit Schraube in Legierung Bein an der Rückseite und ein lenkbares Bugrad vorne.

Die Zieldrohne ist ein ziemlich schnell zu bauen, Servoverlängerungskabel sind bereits vorinstalliert in die Balsa Flügel, der auf einer CF-Stange befestigt ist und an Ort und Stelle geklebt. Die mitgelieferte Hardware ist comprensive und die Gesamtteilezahl gering ist, das heißt, Sie FPV im Eiltempo werden erleben. Die Zieldrohne, mit ihm tailess ist, Pfeilung ist einer der ungewöhnlichsten und interessant EP FPV Modelle in seiner Klasse noch und ist sicher, dass die Aufmerksamkeit der Leute zu bekommen, wohin es fliegt!

Eigenschaften:
Robuste FG Rumpfs
Vorne offen Kamerahalterung mit Anti-Glare-Abdeckung
Große Mid-Mounted-Zugang Hatch
Balsa Konstruiert Flügel & Winglets
Robuste Unterwagen
Steuerbare Bugrad
Niedrige Teilezahl
Alle Hardware wird mitgeliefert
Pusher-Konfiguration

Specs:
Spannweite: 1520mm
Länge: 500 mm
Fliegen Gewicht: 500g ~ 700g
Flügelfläche: 17.2dm2
Flächenbelastung: 29 g / dm 2 ~ 40,6 g / dm 2

Benötigt:
Ihre eigene 4 ~ 6-Kanal-TX / RX mit Elevon Misch
28-36 Brushless Outrunner Motor 1800kv
3 x 9g Servo
30A ESC w / BEC
1300mAh ~ 2200mAh 3s Lipo Akku
FPV Ausrüstung

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    189000058
  • Brand:
    Nicht zutreffend
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    1450.00
  • Länge:
    850.00
  • Breite:
    140.00
  • Höhe
    180.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The plane flies very well, if you set the correct CG. (250mm from the rear edge) The downside - very heavy landing gear. Buy the right carbon 120mm height. Fold back the front landing gear, otherwise it will tear off landing))) Good luck!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its very small and looks crap. I dont know how you fly this thing. You can probably build something like this at home.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Target Drone flies :-). And its very fast. Quality is good, but neet to be sreghten Nose Wheel. Hers My maiden flight video - http://www.youtube.com/watch?v=DsXqzUnCIgg&list=UUgu1IJ5NXcCydNS76izSDDw&index=1&feature=plcp
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The target drone does fly it does require quite a bit of work to get it into the air with setting of wing incidence twisting of the wings and recalculating the CG. With the wing design it flies quite fast. I have been working on this now on and off for two weeks and will have another test fly this week-end. What is needed is at least another Target drone to optomize the the wing incidence and CG settings so that I can have confidence in the final setup. For those wanting to experiment the starting point is as follows: wing incidence 2 degrees positive at root - wing twisting to Zero degrees at tip, CG 125 - 128mm behind leading edge at root.



Good Luck

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The good: Quality and Value exceptional - Mine arrived well packaged with no damage, the plane went together well, and apart from a bit of mucking around on the nose wheel it was really good. I beefed up the nosewheel and the fiberglass around the wing mounting and glued the wings in. Was planning on mounting the motor internally however there wasnt enough room to play with installing it. Installed recommended motor, 45A ESC and micro servos as well as FPV pan/tilt camera setup and tx.
The Bad: 3 failed attempts at maidening this plane, have tried the middle of the recommended C of G as well as both extremes and every time it lunged vertically on take off, stalled, and then fell on its back.

If this plane flew and was stable it would be a solid 5/5 but until that time it is completely unflyable. Hopefully someone gets this sorted and can report on the right C of G, until then mine will be gathering dust which is a shame for such a nice looking model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Really catch looking model, but not for beginners. Would be nice to have the front wheel hole pre-drilled. Wings have to be glued on.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
not bad but a little week in the front and the wheal will fold on landing . , all out ,difficult to use as a reliable FPV ,and is not a slow plane.,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received mine in good condition.
No instruction on where the CG should be.
Based on CG calculator about 188mm from front leading edge.
Nose heavy with 2200 3S lipo.
Ready to maiden, but i think I will need the flight stabilizer to maiden it.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is just a manufacturing and packaging review... I still have to fly it.



1 stars, both wings have the tip bumped and there is also some bump here and there in the top surface.



One wing has the hole for the carbon rod closed by excessive glue usage (I will have to drill it hoping that there is not glue also deep inside the hole where my drill can't arrive).



The place for carbon tube inside the fuselage is not aligned with the fuselage and the right is lower than left and anyway it's also too large for the carbon rod, there is a lot of play. wings won't be solid with the fuselage.



There are no air scoops for motor/esc ventilation.



Will post more once the airplane is ready and maiden.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
buen producto, plusplusplusplusplus
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Target Drone

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.