Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Tarot 680Pro Hexacopter Faltrahmen 3K Kohlenstoff (KIT)

Generating Links

Tarot 680Pro Hexacopter Faltrahmen 3K Kohlenstoff (KIT)

Preis:

Now save speichern 0,00 € 0,00 €

115,99 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
297000036-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Tarot fügt die neue PRO680 der beliebten 680-Serie von Hexacopter Frames. Die neue 680Pro wurde mit einem größeren verfügbaren Fläche für Geräte optimiert und neu gestaltet Klapp Geometrie es noch bequemer zu machen. Dieser Entwurf hat einen niedrigeren Schwerpunkt und ist stabiler mit einer stärkeren visuellen Eindruck.

Das PRO680 hat eine hohe Festigkeit Mattgold Verbund PCB Leiterverbindungen verarbeitet, damit es effizienter wird und das Hinzufügen von Sicherheit. Die 16mm 3K hohle reine Kohlefaserrohr ist alle CNC-Bearbeitung, so dass es stärker und leichter als die Aluminiumversion. Die Klappsitze Kohlenstoff Arm wurden verbreitert und 3-Punkt-Unterstützung verbessert zu verhindern Knacken und Brechen mit einem besseren Gefühl in verriegelt.

Die neue C-Rohr Hardware-Set besteht aus importierten faserverstärkten Nylonmaterial. Die neuen Klapp bipod Design und Sicherheitsschlösser sind verbesserte Stoßkräfte zu verhindern, dass die Struktur zu beschädigen. Der Pro680 hat neue einstellbare Motorbefestigungspositionen und Kabelbaumschutz.

Die Tarot Serie 680 mit seiner hohen Portabilität eignet sich für abseits der ausgetretenen Pfade fliegen und Aufgaben wie Luftaufnahmen, Fernerkundung, Kartierung, Leben Exploration und die Liste geht weiter. Wenn Sie bereit für eine pro Klasse Acromodelle Plattform sind, suchen Sie nicht weiter als das Tarot PRO680.

Eigenschaften:
• Falten-Fähigkeit für Transport und Lagerung
• 3K Carbon-Konstruktion
• Vergoldete PCB-Verbindungen
• Leicht
• 15-Minuten-Flugzeiten (je nach Konfiguration)
• Klapp Fahrwerk

Specs:
Größe Motor zu Motor: 685mm
Gewicht: 780g
Höhe vom Boden bis unteren Stangen: 180mm
Höhe vom Boden nach oben: 220mm

Erforderlich:
5ch Funksystem
Lotse
Propellergröße: 12 ~ 13-Zoll-Carbonfaser-Propeller
Motor: 620KV 4006 Brushless Motor
Batterie-Spezifikationen: 14.8V 4000 ~ 5000mAh
Brushless Regler: 20 ~ 30A

  • Tarot 680PRO Hexacopter Frame
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2016

easy to setup and durable. love it

Lee-ann | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Parts missing from the kit. Hobbyking useless with regards replacement. Got this frame from the EU warehouse and hobbyking send 1 set of missing parts not the 2 as required so had to buy a full replacement frame as this was a build for a customer. Found its quicker to get a replacement frame from China than it is for hobbyking to sort out the problems. WONT BE BUYING AGAIN!!

Jason | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 28, 2016

Good quality of carbon used.
Sturdy frame when all put together.
PDB is a bit awkwardly made in the upper center plate, and the battery connection tabs are also on the front when you would like to use the according canopy.
All in all that are a couple of improvements for TAROT to make.

A downside personally is the plastic T-piece on the lower part of the landing gear.
The grubscrew sollution is just not working... It is flimsy and if you go wrong you can't fasten them anymore.
My Advice: buy the original ALU CNC T-piece from tarot directly. That sollution is even LIGHTER!

But for the price it is definitely a verry good product

Klima | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 02, 2016

Some parts were missing, but I was still able to build the whole frame and put it in the air. Manual could be better. Still, impressed with the frame quality and low overall weight.

My Tarot 680PRO test:
https://www.youtube.com/watch?v=hCC8L1d0aMA

Tarot 680PRO heavy lift:
https://www.youtube.com/watch?v=cikLxBqk8_0

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 25, 2015

This frame is amazing with the full carbon fiber. Very strong and very easy to put together. I would buy this frame again if I needed to. The only complaint I have is that the screws can strip somewhat easily and it is unusual screw so it is hard to find.

Scipy | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 04, 2015

Perfekt kann man nur Empfehlen, die Qualitt ist Super.
Die Anleitung die dabei ist aber sehr drftig.

Sutemos | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 18, 2015

Good frame, all parts included, even some spare.
Currently I'm flying with emax 2213 - 935 KV motors and 4S 5000 mAh pack with no problems. My take off weight ~2.6 KG, flight time ~ 7-8 min (20pcnt power left after landing).

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 21, 2015

Really impressed with the Tarot 680 Pro, works well and is high quality! lots of spares too for when you land it hard etc!



Its easy to put together but I would suggest watching a video on youtube over following the instructions as they tend to be fairly lacking.



its easy to balance and can take a fair load!

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 24, 2015

Awesome frame. I shortened the arms to make it about 550 size. Works perfect for me. Very compact.

Six7One | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 08, 2015

LOW QUALITY Plastics.
2 Arm locks broke on first use (red ones)
Brass inserts for motor mounts have pulled out of the plastic on 5 of the 24 holes. Pulled out as soon as ANY force was applied to the screw. Not talking about torquing them down to tighten the motor mounts to arms.

GARBAGE. Buy a different frame.

  1. 1
  2. 2
  3. 3
  4. 4
Kundendateien
Tarot 680 pro Download [389]
Motor Plate Download [128]
Assembly tips and tricks Download [645]
680 Pro, 620kv, octo esc, dji naza m2, q Download [4570]
motor and esc Download [2047]
motor, ESC mounting Download [2282]
motor, ESC mounting Download [2611]
motor, ESC mounting Download [2047]
680Pro with Canopy Download [2609]
Carbon plate on top with electronics Download [2383]
  1. 1
  2. 2
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!