Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Tarot 680Pro Hexacopter Faltrahmen 3K Kohlenstoff (KIT)

Tarot 680Pro Hexacopter Faltrahmen 3K Kohlenstoff (KIT)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1200 g
SKU:
297000036-0

Combine

essential items and
esc
battery
  • Turnigy 5800mAh 4S 25C Lipo-Pack

    Turnigy 5800mAh 4S 25C Lipo-Pack

    Now save Speichern 46,36 € 46,36 €

    Special Price 4,08 € 4,08 €

    You save Speichern 46,36 € 46,36 €

    Was  50,44 €

motor
acc
Product
Description

Tarot fügt die neue PRO680 der beliebten 680-Serie von Hexacopter Frames. Die neue 680Pro wurde mit einem größeren verfügbaren Fläche für Geräte optimiert und neu gestaltet Klapp Geometrie es noch bequemer zu machen. Dieser Entwurf hat einen niedrigeren Schwerpunkt und ist stabiler mit einer stärkeren visuellen Eindruck.

Das PRO680 hat eine hohe Festigkeit Mattgold Verbund PCB Leiterverbindungen verarbeitet, damit es effizienter wird und das Hinzufügen von Sicherheit. Die 16mm 3K hohle reine Kohlefaserrohr ist alle CNC-Bearbeitung, so dass es stärker und leichter als die Aluminiumversion. Die Klappsitze Kohlenstoff Arm wurden verbreitert und 3-Punkt-Unterstützung verbessert zu verhindern Knacken und Brechen mit einem besseren Gefühl in verriegelt.

Die neue C-Rohr Hardware-Set besteht aus importierten faserverstärkten Nylonmaterial. Die neuen Klapp bipod Design und Sicherheitsschlösser sind verbesserte Stoßkräfte zu verhindern, dass die Struktur zu beschädigen. Der Pro680 hat neue einstellbare Motorbefestigungspositionen und Kabelbaumschutz.

Die Tarot Serie 680 mit seiner hohen Portabilität eignet sich für abseits der ausgetretenen Pfade fliegen und Aufgaben wie Luftaufnahmen, Fernerkundung, Kartierung, Leben Exploration und die Liste geht weiter. Wenn Sie bereit für eine pro Klasse Acromodelle Plattform sind, suchen Sie nicht weiter als das Tarot PRO680.

Eigenschaften:
• Falten-Fähigkeit für Transport und Lagerung
• 3K Carbon-Konstruktion
• Vergoldete PCB-Verbindungen
• Leicht
• 15-Minuten-Flugzeiten (je nach Konfiguration)
• Klapp Fahrwerk

Specs:
Größe Motor zu Motor: 685mm
Gewicht: 780g
Höhe vom Boden bis unteren Stangen: 180mm
Höhe vom Boden nach oben: 220mm

Erforderlich:
5ch Funksystem
Lotse
Propellergröße: 12 ~ 13-Zoll-Carbonfaser-Propeller
Motor: 620KV 4006 Brushless Motor
Batterie-Spezifikationen: 14.8V 4000 ~ 5000mAh
Brushless Regler: 20 ~ 30A

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    297000036-0
  • Brand:
    Nein
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    1200.00
  • Länge:
    330.00
  • Breite:
    60.00
  • Höhe
    220.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
easy to setup and durable. love it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Parts missing from the kit. Hobbyking useless with regards replacement. Got this frame from the EU warehouse and hobbyking send 1 set of missing parts not the 2 as required so had to buy a full replacement frame as this was a build for a customer. Found its quicker to get a replacement frame from China than it is for hobbyking to sort out the problems. WONT BE BUYING AGAIN!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality of carbon used.
Sturdy frame when all put together.
PDB is a bit awkwardly made in the upper center plate, and the battery connection tabs are also on the front when you would like to use the according canopy.
All in all that are a couple of improvements for TAROT to make.

A downside personally is the plastic T-piece on the lower part of the landing gear.
The grubscrew sollution is just not working... It is flimsy and if you go wrong you can't fasten them anymore.
My Advice: buy the original ALU CNC T-piece from tarot directly. That sollution is even LIGHTER!

But for the price it is definitely a verry good product
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Some parts were missing, but I was still able to build the whole frame and put it in the air. Manual could be better. Still, impressed with the frame quality and low overall weight.

My Tarot 680PRO test:
https://www.youtube.com/watch?v=hCC8L1d0aMA

Tarot 680PRO heavy lift:
https://www.youtube.com/watch?v=cikLxBqk8_0
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This frame is amazing with the full carbon fiber. Very strong and very easy to put together. I would buy this frame again if I needed to. The only complaint I have is that the screws can strip somewhat easily and it is unusual screw so it is hard to find.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfekt kann man nur Empfehlen, die Qualitt ist Super.
Die Anleitung die dabei ist aber sehr drftig.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame, all parts included, even some spare.
Currently I'm flying with emax 2213 - 935 KV motors and 4S 5000 mAh pack with no problems. My take off weight ~2.6 KG, flight time ~ 7-8 min (20pcnt power left after landing).

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Really impressed with the Tarot 680 Pro, works well and is high quality! lots of spares too for when you land it hard etc!



Its easy to put together but I would suggest watching a video on youtube over following the instructions as they tend to be fairly lacking.



its easy to balance and can take a fair load!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome frame. I shortened the arms to make it about 550 size. Works perfect for me. Very compact.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
LOW QUALITY Plastics.
2 Arm locks broke on first use (red ones)
Brass inserts for motor mounts have pulled out of the plastic on 5 of the 24 holes. Pulled out as soon as ANY force was applied to the screw. Not talking about torquing them down to tighten the motor mounts to arms.

GARBAGE. Buy a different frame.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Tarot 680PRO Hexacopter Frame

Upload video
Upload
Files

Combine

essential items and
esc
battery
  • Turnigy 5800mAh 4S 25C Lipo-Pack

    Turnigy 5800mAh 4S 25C Lipo-Pack

    Now save Speichern 46,36 € 46,36 €

    Special Price 4,08 € 4,08 €

    You save Speichern 46,36 € 46,36 €

    Was  50,44 €

motor
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.