Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Tarot ZYZ22 GOPRO Brushless Kamera Gimbal-Controller

Tarot ZYZ22 GOPRO Brushless Kamera Gimbal-Controller

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

38,77 €
Status:
Auf Lager
SKU:
297000033-0
WANT FREE SHIPPING? Click here to find out more!

Tarot braucht keine Einführung, ihr Name ist ein Synonym für Qualität und dort 2 Achsen ZYX22 Gimbal-Controller ist keine Ausnahme.

Der Tarot ZYX22 Brushless Kardan-Controller von allen anderen Lauf von der Mühle BLGC einzigartig auf dem Markt ist, entfernt sie die FTDI-Chip von Bord Größe und Gewicht zu sparen, sondern ist genauso einfach mit dem mitgelieferten USB-Adapter verwenden. Und Tarot Computer-Benutzeroberfläche für das Setup und Tuning (falls erforderlich) ist die einfachste und intuitive noch nicht gesehen. Die Tarot-Packs in mehr Optionen, wie die Unterstützung für Ratenmodus oder Positionsmodus als-auch benutzerdefinierte anfängliche Steigungswinkel und die Unterstützung für Standard-RC-Eingang sowie SBUS und Direct DSM2 / DSMX Eingang über einen Satellitenempfänger. Das Tarot ZYX22 ist einfach die raffinierteste Brushless Gimbal-Steuerung und IMU auf dem Markt und perfekt für die T-2D-Gimbal oder andere 100-300 Gramm Kamera Gimbal-Systeme.

Eigenschaften:
• Versorgungsspannung Verpolungsschutz und Spannungskompensation
• Kurzschlussschutz
• Benutzerdefinierte anfängliche Steigungswinkel
• Empfindlichkeit Parametereinstellung Support und Software
• Unterstützt Joystick-Rate-Modus und Positions-Modus
• Dual 32-Bit-High-Speed-ARM-Core-Prozessor
• Einfach zu bedienende Software

Technische Daten:
Betriebsspannung: DC 7.4V ~ 14.8V (empfohlen 12V, drei Lithium - Batterie)
Arbeitsstrom: 200mA-500mA (Stromversorgungsspannung und den Motor bezogen)
Arbeitstemperatur: -15 ° C ~ 65c
Prozessor: Dual 32-Bit - High-Speed ​​- ARM - Core - Prozessor
Sensor: Drei Rotor MEMS - Gyroskop Rotor MEMS Beschleunigungsmesser
Maximale Winkelgeschwindigkeit: 2000 ° / s
Maximale Beschleunigung: 16g
Steuerfrequenz: 2000Hz
Motorantriebsfrequenz: 20 kHz (kein Lärm Glättungs Laufwerk)
Regelgenauigkeit: 0,1 °
Steuerwinkelbereich: -45 ° ~ 45 ° (Rolle), -135 ° ~ 90 ° (Tilt)
Power Interface: DC 7.4V ~ 14.8V (empfohlen 12V, drei Lithium - Batterie)

Eingeschlossen sind:
ZYX3 Kreisel USB-Kabel Gruppe × 1
Zwei-Achsen-Gyrosensor Sensorkopf × 1
Zwei-Achsen-Gyrosensor Kopf Master-Controller × 1
USB-Computer-Schnittstelle x 1
ZYX22 Brushless-Kardan-Controller

  • Artikelbezeichnung 297000033-0
  • Brand Tarot
  • Kapazität ( mAh) -
  • Gewicht 90.0000
  • Länge 80.00
  • Breite 35.00
  • Höhe 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good! Tarot ZYZ22 GOPRO Brushless Camera Gimbal Controller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good! Tarot ZYZ22 GOPRO Brushless Camera Gimbal Controller

mi era capitato di invertire l'aggancio dell'accellerometro su un kit completo tarot 2D e per mia sorpresa vendevano anche solo l'elettronica di ricambio. Invece di riacquistare tutto il gimbal ho riacquistato solo l'elettronica che identica a quella a corredo con il gimbal. Per sostituirla basta aprire l'alloggio dell'accellerometro e via. Non ci sono controindicazioni. Se pu essere fatta una nota negativa, i contatti sono facilmente invertibili e scambiabili, infatti mi capitato di bruciare la scheda inserendo il contatto dell'accellerometro nell'apposita presa per collegare l'usb. Si bruciato sia l'accellerometro che la scheda.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

mi era capitato di invertire l'aggancio dell'accellerometro su un kit completo tarot 2D e per mia sorpresa vendevano anche solo l'elettronica di ricambio. Invece di riacquistare tutto il gimbal ho riacquistato solo l'elettronica che identica a quella a corredo con il gimbal. Per sostituirla basta aprire l'alloggio dell'accellerometro e via. Non ci sono controindicazioni. Se pu essere fatta una nota negativa, i contatti sono facilmente invertibili e scambiabili, infatti mi capitato di bruciare la scheda inserendo il contatto dell'accellerometro nell'apposita presa per collegare l'usb. Si bruciato sia l'accellerometro che la scheda.

It works but LOTS of small nagging issues.
1. No standard servo connectors. Micro connectors on the board (1.25/Molex) so you should purchase adapter or solder wires directly. These are not mentioned in suggested to buy section, needless to say. Annoying, especially for post orders.
2. USB interface is based on old Prolific chip which is NOT supported in Win 8. The other chip will work but interface socket on board is 4 pin 1.25 Molex with unlabelled pins. Had to dig up my Win7 notebook. Annoying.
3.No protection case for sensor. Sensor wire is to short to mount it on gimball for larger frames.
4.Long init after power is plugged.

But it work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It works but LOTS of small nagging issues.
1. No standard servo connectors. Micro connectors on the board (1.25/Molex) so you should purchase adapter or solder wires directly. These are not mentioned in suggested to buy section, needless to say. Annoying, especially for post orders.
2. USB interface is based on old Prolific chip which is NOT supported in Win 8. The other chip will work but interface socket on board is 4 pin 1.25 Molex with unlabelled pins. Had to dig up my Win7 notebook. Annoying.
3.No protection case for sensor. Sensor wire is to short to mount it on gimball for larger frames.
4.Long init after power is plugged.

But it work.

Works perfectly! But the sensor cable should be longer...
Mounted mine on the HobbyKing Brushless ActionCam Gimbal With 2208 Motors and 3K Carbon Construction and GOPRO Hero 2.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works perfectly! But the sensor cable should be longer...
Mounted mine on the HobbyKing Brushless ActionCam Gimbal With 2208 Motors and 3K Carbon Construction and GOPRO Hero 2.

Nice little controller for the price, just a bit hard to tune up, but once it is tuned, I think it works well. I had to order my replacement after burning up the first in a failed firmware update process...OOPS!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little controller for the price, just a bit hard to tune up, but once it is tuned, I think it works well. I had to order my replacement after burning up the first in a failed firmware update process...OOPS!

Customer files
No File Name Download [2]
No File Name Download [594]
No File Name Download [35]
994156982X437860X40.JPG Download [97]
Tarot 2 ejes Manual spanish Download [533]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save