Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Der Teufel 1/10 4WD Drift Car (ARR)

Generating Links

Der Teufel 1/10 4WD Drift Car (ARR)

Preis:

Now save speichern 0,00 € 0,00 €

132,38 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
432000085-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der Teufel 4WD Drift Car ist ohne Zweifel der beste Wert in R / C Drift Autos auf dem Markt heute! Als ein ARR (Almost Ready to Run) Modell, das Auto komplett montiert und Setup direkt aus der Box. Sie müssen lediglich Ihre eigenen 2-Kanal-Funksystem und ein 2S 7.4V LiPoly Batterie hinzufügen zu driften, bereit zu sein!

Die Teufels Chassis verfügt über einen Riemen 4WD-System angetrieben, das sehr effizient, wartungsarm ist und legt wirklich die Kraft nach unten auf alle vier Räder. Ein Front montiert 12.5T, 3000kv Track Brushless - Motor mit wasserdichte ESC spannt die Gewichtsverteilung auf der Vorderseite des Fahrzeugs, so dass der hintere Zug leicht zu brechen. Das Chassis nutzt Kugellager überall und gefangen Stift CVD die einen reibungslosen und effizienten Antrieb zu geben.

Die Teufels Suspension ist voll einstellbar. Die Stoßdämpfer sind Öl aus langlebigem, leichtem Aluminium gefüllt und gebaut. Sie können den Schock Einbaulage, Sturz / Nachlauf (vorne) und Sturz (hinten) einzustellen. Eine einfache Einweg vordere Differential mit einer verriegelten Hinterachse auf der Rückseite geben eine optimale Leistung und beständigsten Driftkontrolle tragen. All dies, dachte mit dem gut kombiniert aus Elektronik dieses Chassismontage und verstellbare Batterie Platzierung macht so gut ausbalanciert, dass auch eine komplette Anfänger wie ein Profi driften kann in kürzester Zeit!

Die richtige harte Mischung, Hartgummi glatt Driftreifen kommen vorinstalliert auf 3mm Offset Rennrädern. Die Karosserie kommt vorlackiertes und getrimmt, müssen Sie einfach die Flügel Ihrer Wahl (zwei optionale Flügel im Lieferumfang enthalten) zu installieren.

Eigenschaften:
• ARR (Almost Ready to Run), einfach Ihr eigenes Funksystem und Batterie hinzufügen
• Hocheffiziente Riemenantrieb 4WD-System
• Ein-Wege-diff und verriegelt Hinterachse
• Brushless wasserdicht Trackstar Brushless-Motor vorinstalliert
• Front montierter Motor
• Mehrere Batterieposition
• Hohes Drehmoment Lenkservo vorinstalliert
• Festverbindung Skala treaded Driftreifen
• Komplett einstellbare Aufhängung
• Einfach zu ändern Lenkeinstellung ohne zusätzliche Teile zu begegnen
• Öl gefüllt Aluminium Schocks
• Vorlackierte / getrimmten Rohkarosserie
• Hohe Skala Detail

Specs:
Gesamtlänge: 440mm
Gesamtbreite: 195mm
Radstand: 260 mm
Höhe: 123 mm
Motor: Track 12.5T 3000kv
ESC: Track 45A wasserdichte ESC
Servo: Hohes Drehmoment Standardgröße

Benötigt:
2-Kanal-Sender und Empfänger
2S 7.4V LiPoly Batterie (Hartschalenetui Batterie empfohlen)

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Elia | Verifizierter Käufer

  • Overall
  • Quality
  • Value

INFO

Jun 10, 2018

Assali di trazione e sospensioni un pochettino scadenti il resto ottima macchina!!

Alucai | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Needs work

Nov 16, 2017

Just so you know this right off the bat, the axles that come with this car will wear out and break before you can run 2 full packs(most likely). The good news is that there are axles that are a perfect fit, you need 51mm for the front and 48.5mm for the back. http://www.broadtech.hk/eagleshop/shop/ShopProductDetail.aspx?id=R31-15-L51
http://www.broadtech.hk/eagleshop/shop/ShopProductDetail.aspx?id=R31-15
These are a perfect fit and go to the extreme angles necessary for drift. The other thing i did was add a washer on the outside of the center belt guide to keep the belt from jumping off the bearing. After doing these things this car is AMAZING. It drifts so nice and smooth, everyone is spinning out and hitting walls with their hard to drive cars but this thing is so easy to control and smooth. The belts are very strong, i have not had any problems with anything other than what i already mentioned. The advantage or effect of having the motor in the front is that it makes the car very smooth in its drifting and transitioning action which makes this car easy to drift....and that makes you look good. Once you do what i said, this car is simply awesome, ordered another one for my friend. here is my video: https://www.youtube.com/watch?v=HaBmQBhhEKQ

Alucai | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Needs work

Nov 16, 2017

Just so you know this right off the bat, the axles that come with this car will wear out and break before you can run 2 full packs(most likely). The good news is that there are axles that are a perfect fit, you need 51mm for the front and 48.5mm for the back. http://www.broadtech.hk/eagleshop/shop/ShopProductDetail.aspx?id=R31-15-L51
http://www.broadtech.hk/eagleshop/shop/ShopProductDetail.aspx?id=R31-15
These are a perfect fit and go to the extreme angles necessary for drift. The other thing i did was add a washer on the outside of the center belt guide to keep the belt from jumping off the bearing. After doing these things this car is AMAZING. It drifts so nice and smooth, everyone is spinning out and hitting walls with their hard to drive cars but this thing is so easy to control and smooth. The belts are very strong, i have not had any problems with anything other than what i already mentioned. The advantage or effect of having the motor in the front is that it makes the car very smooth in its drifting and transitioning action which makes this car easy to drift....and that makes you look good. Once you do what i said, this car is simply awesome, ordered another one for my friend. here is my video: https://www.youtube.com/watch?v=HaBmQBhhEKQ

Chopperflyboy | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 26, 2016

Absolute rubbish axles lasted ten mins and no upgrade avaliable play for ten mins wait two months for replacment axles then play for another ten mins for the same again.
Cost me $54 to send back to HK
HK will offer you 7.95 replacment part thats never in stock and are the same as the ones you get with the car .
Come on Lets get the problem fixed and stop ripping off customers by goving them rubbish.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 22, 2016

he same time!

The Devil 1/10 4WD Drift Car (ARR)

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 11, 2016

its a very most car drift

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 23, 2015

brilliant drifter , drive shafts are very weak tho so get some spares incase ! but gotta love hobby king !

DarkSyd3D | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 03, 2015

This is a VERY fragile model with almost zero parts support. All the most important parts either HK does not stock, or can not be found anywhere online in stock. Before my first battery was over I snapped the front dog bone drive axle. I have spent an hour on line looking for the part number that IS ON THE SPARE PARTS SHEET and the only place i found it said it wasnt an actual site.
The belts slip off the idlers constantly at the recommended belt tension. I wish I would have paid the extra few dollars and bought a car that has not been discontinued for the last year!!

jarell | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

May 31, 2015

Garbage electronics I am currently going through a 2nd return. And you have to pay to ship it back then wait 2 or more weeks. Other then that I like the chassis drifts well holds a angle very well at all speeds. But my advice is to just get the chassis kit and you own esc and motor. Trackstar is a cheap company and I would rate there products as faulty . I'm not happy at all with the outcome of this purchase as of yet.the cvd broke as well 1st couple minutes I sent that back with the 1st esc and motor and never recived a replacement. Like I said chassis good don't expect much but headaches from there electronics..

Jason | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

May 04, 2015

I received "The Devil" and drove it at a drift track that night out of the box. It handled very well and some of the guys running 50/50, not countersteer like this, wanted to drive it. I replaced the electronics with sensored elec. because the unsensored motor and speed control would sometimes "stall" in low speed corners messing up the drift or stopping it. I kept the steering servo and continue to use it. The second night i drifted with it the right rear axle snapped. I replaced the rear axles(cvds) with 48.5mm axles from broadtech. I replaced the front axles with 51mm axles(cvds) from broadtech. I added a shim to the belt tensioner for the longer belt as it was flexing and the belt would run off it sometimes. The stock tires were too slippery for concrete, i put hpi tdrifts on it. The chassis right now is solid, no problems after what ive done to it. When you get this, you must order the axles mentioned, mine broke within 2 houres of use at the rear, the fronts were a little better, less abuse in front. This car performed very well, drifting on concrete and carpet. The car was very easy to be precise with and get close to the walls, the rear end kicks out and slides very nicely. I do recommend this car because of how well it performs on the track.

  1. 1
  2. 2
Kundendateien
Manual - Devil better quality Download [1310]
manual - Devil drift car Download [6007]
Devil Spare Parts 2 Download [302]
Devil Spare Parts 1 Download [368]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!