Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

TM Überwachung XP 45inch ARF

TM Überwachung XP 45inch ARF

Discontinued Product

Please continue searching for a similar product.
SKU:
TM-SuperVisionXP
WANT FREE SHIPPING? Click here to find out more!

Überwachung XP

Die Überwachung XP ist die perfekte elektrische Energie 3D / IMAC Flugzeug.
Ein großes Modell mit hervorragender Qualität das ist zu diesem Preis abelievable!
Wie man
es von einem Modell dieses Kalibers erwarten würde es super große Steuerflächen, die alle Laser geschnitten hochwertige Balsaholz und hervorragend abgeschlossen.
Die Motorhaube ist aus Fiberglas hergestellt, und die Solarfolienabdeckung ist einwandfrei.

Canopy ist an ihrem Platz gehalten mit Magneten , die , wenn sie mit der Entdeckung Kraft der Ebene kombiniert, die Haube an Ort und Stelle zu sperren, wird es nie im Flug abspringen.

Diese Ebene ist mit Halterungen für beide EP oder Gas aufbaut.
Modell kommt mit voller Anweisungen und Abziehbilder.


Dies ist ein extrem leichtes Flugzeug.

Spannweite: 45inch
Flügelfläche: 380sq. Im.
Länge: 43inch
Gewicht (nicht Motor / batt inkl): 1.9lbs
Funkfernsteuerung : 4 - Kanal
Recomended Motoren;
KDA36-12M
HXT35-30B-1400

Das Buildprotokoll.
Lesen Sie alles über und sehen Sie Bilder von unseren Buildprotokoll zu diesem Modell.
http://myhobbycity.com/blog.php?b=73

  • Artikelbezeichnung TM-SuperVisionXP
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 2750.0000
  • Länge 0.00
  • Breite 0.00
  • Höhe 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

El avin, por montar an, tiene un aspecto absolutamente impecable.



El corte lser es perfecto pero quiz el fuselaje est demasiado aligerado para mi gusto.



Quiz cambie el tren por uno de cable de piano pues para nuestra pista bacheada la zona donde se ancla parece excesivamente aligerada para un tren rgido de duraluminio como el que trae.



Dos traviesas diagonales a mitad de cola han llegado partidas lo que me obliga a hacer ciruja menor.



Estoy pensando en ponerle un AXI 2808 o similar, aunque casi seguro le sobrar potencia.



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

El avin, por montar an, tiene un aspecto absolutamente impecable.



El corte lser es perfecto pero quiz el fuselaje est demasiado aligerado para mi gusto.



Quiz cambie el tren por uno de cable de piano pues para nuestra pista bacheada la zona donde se ancla parece excesivamente aligerada para un tren rgido de duraluminio como el que trae.



Dos traviesas diagonales a mitad de cola han llegado partidas lo que me obliga a hacer ciruja menor.



Estoy pensando en ponerle un AXI 2808 o similar, aunque casi seguro le sobrar potencia.



This plane finishing is neat and tidy

It compares in price and it is visible a superior air performance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane finishing is neat and tidy

It compares in price and it is visible a superior air performance

tres bel avion bien finis

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

tres bel avion bien finis

very good airplane well finished, with nice color. the notice included is ok for me.I put a HXT 35-36A1450kv and it is great with 3s 2200mah

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good airplane well finished, with nice color. the notice included is ok for me.I put a HXT 35-36A1450kv and it is great with 3s 2200mah

Very good plane, good quality, good performance, very accurate on flying, and the best of all is cheap, for its price is more than a good airplane!!!!!!



Use it with at least 35 ampers speed controller and motor HXT35-30B-1400, this setup is more than enough, to fly.

Also with 20gr servos is ok.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good plane, good quality, good performance, very accurate on flying, and the best of all is cheap, for its price is more than a good airplane!!!!!!



Use it with at least 35 ampers speed controller and motor HXT35-30B-1400, this setup is more than enough, to fly.

Also with 20gr servos is ok.

It's a great plane :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a great plane :)

After several month, my SuperVision is still flying great. However, the ultralight wood structure is fragile and one must be careful during transport or when the plane is manipulated.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After several month, my SuperVision is still flying great. However, the ultralight wood structure is fragile and one must be careful during transport or when the plane is manipulated.

This is my first order with HC and the plane exceeded my expectations quite a bit. The covering is excellent, the parts fit generally well...

I compared it to a mate's Ultrafly Extra and the Supervision was far better built at a lower price.

I needed 2-3 solid building evenings to complete the plane. Reinforced the fuse with CA and some epoxy. Used epoxy on the hinges instead CA. The manual is absolutely sufficient.

Installed a tail wheel, used stiffer push rods than the ones that came with it and installed bigger wheels.



Whenever you need to cut the film use a soldering iron! That gives clean cuts and welds the film to the wood!



Someone wrote he needed 2 hours to finish the plane...I want to see that...



This plane looks very much like a Brio 10, there are many reviews out there on that plane, have a look! The Supervision should perform very similarly!



You have to be a good pilot for this baby, it is incredible responsive, but it glides surprisingly well despite the AUW of 900gr. Landings are therefore quite relaxed.

Enjoy!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my first order with HC and the plane exceeded my expectations quite a bit. The covering is excellent, the parts fit generally well...

I compared it to a mate's Ultrafly Extra and the Supervision was far better built at a lower price.

I needed 2-3 solid building evenings to complete the plane. Reinforced the fuse with CA and some epoxy. Used epoxy on the hinges instead CA. The manual is absolutely sufficient.

Installed a tail wheel, used stiffer push rods than the ones that came with it and installed bigger wheels.



Whenever you need to cut the film use a soldering iron! That gives clean cuts and welds the film to the wood!



Someone wrote he needed 2 hours to finish the plane...I want to see that...



This plane looks very much like a Brio 10, there are many reviews out there on that plane, have a look! The Supervision should perform very similarly!



You have to be a good pilot for this baby, it is incredible responsive, but it glides surprisingly well despite the AUW of 900gr. Landings are therefore quite relaxed.

Enjoy!

ergvregbzxcfgbxXxafcdt

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ergvregbzxcfgbxXxafcdt

A nice kit with a superb fiberglass cowl and undercarriage. Cockpit assembly is nicely done and works well.

Color lines match on mine.

I changed the wheels (the one in the kit are just good for an aircraft half that weight) and replaced the skid for a tailwheel.

The carbon tube for the wing joiner is missing, it has been replaced by a beech dowel, easy to find in a DIY shop. UH said they would send the missing part but none as came.

Fitted with a BM 2915, 2200 3S lipo and four 18gr servos AUW is 1100 gr.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A nice kit with a superb fiberglass cowl and undercarriage. Cockpit assembly is nicely done and works well.

Color lines match on mine.

I changed the wheels (the one in the kit are just good for an aircraft half that weight) and replaced the skid for a tailwheel.

The carbon tube for the wing joiner is missing, it has been replaced by a beech dowel, easy to find in a DIY shop. UH said they would send the missing part but none as came.

Fitted with a BM 2915, 2200 3S lipo and four 18gr servos AUW is 1100 gr.

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!