Tomcat X-Tail 2.5 Metre Composite Sport or F3F Slope Glider w/Flaps ARF (Blue/Yellow)

The Tomcat X-Tail composite glider has been designed for the intermediate to experienced model flyer. It is very fast, agile, and very maneuverable and has been designed with F3F sustained slope soaring in mind. It will fly in virtually all conditions which makes it an all-round contender in light or strong wind conditions. Clean and with the flaps set for speed the Tomcat will fly like a rocket, set the camber or crow braking then the Tomcat will fly slowly or make precise landings. The wing has an elliptical planform which gives the Tomcat a very wide speed envelope with no nasty habits at slow speeds. A very versatile and fantastic glider that you will never want to stop flying.

This new generation of the composite glider is manufactured to a very high standard using fiberglass and carbon which gives it torsional strength and excellent stiffness. The fuselage is carbon-reinforced at the root and carbon ribbon reinforces the rear parts. The wings are hollow molded in fiberglass with carbon reinforcing and come in 2 parts for easy transportation with a square carbon wing joiner, also the tail is removable. The finish is outstanding, it is a smooth high gloss gel-coat finish with pre-painted graphics, it looks stunning. The Tomcat has ailerons, elevator, rudder, and flaps which will require a minimum of a 6ch radio with mixing so that you can program in camber for different flight modes and crow braking for pinpoint landings. Hardware includes a ballast tube so that you can weight the glider up in windy conditions, pushrods and clevises, control horns, wing and tail joiner, servo plates, and covers.

Features:
• Smooth high gloss gel-coat finish with pre-painted graphics
• Ballast tube to increase the glider's weight
• Fiberglass and carbon construction
• Hollow molded 2 part composite wing for lightness
• High torsional strength and stiffness
• Flaps for camber modes and crow braking
• Very wide speed range

Specs:
Type: Composite F3F Slope Glider w/Flaps
Wingspan: 2.48 meters
Length: 1280mm
Wing Area: 44dm²
Construction: Fiberglass and carbon
Empty Weight: 1240g
Color: Blue and yellow

Required:
Radio: 6 channels or more with mixing
Servos: 4 x MG slim wing servo, 2 x MG mini or micro servo
Battery: 4.8~6V Nimh with switch harness or 7.4V lipoly with BEC unit