ToolkitRC Q6AC (US Plug) 1~6S 15A 400W AC/1000W DC Quad Balance Charger/Discharger w/Wireless Charging

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

Navigation and programming of the Q6AC 4 menu channels are made very easy with the wide-angle, back-lit, IPS 3.5"x480x320 resolution full-color LCD screen, and metal scrolling wheel. A wide variety of different chemistry batteries can be charged, these include, LiPo, LiHV, LiFe, Li-ion, and LTO (Lithium-Titanium-Oxide) @ 1~6S, NiMh @ 1~16S, and Pb @ 1~10S. With a DC power input, the charger operates as 4 independent 250W channels, this gives a combined total output of 1000W. With an AC power input, the charge power is reduced to 100W per channel, this gives a maximum for the charger of 400W. However, 2 channels can be combined when using AC, this will allow for up to 250W of charging power.

Because each channel is completely independent, different parameters can be set for each of the 4 channels, this includes charging or discharging different chemistry batteries. Inputs include an AC mains socket, a DC XT90 socket, and a USB port for updating the firmware. Outputs include 4 x XT60 charging ports, the 2 side ports can be switched between XT60 and XT30 via a slider, 4 x 2~6S balance ports, and a USB A/C. When required, the powerful, intelligent, high-flow cooling fan cuts in at half speed when internal temperatures of the charger exceed 42°C, this will then switch to full power when temperatures exceed 50°C. The Q6AC also supports USB fast charging, the "C" can supply up to 65W, and the "A" port up to 30W. Protocols supported are PD, QC, AFC, FCP, SCP, PE, SFCP, and VOC.

The ToolkitRC Q6AC quad balance charger/discharger is a must for every modeler's workshop due to its versatility of being able to charge, or discharge 4 batteries simultaneously, and independently, its ability to run from AC and DC power sources, and its easy-to-use, intuitive programming menus.

Features:
• Dual AC/DC power inputs, 100~240V AC or 7~30V DC
• Ability to charge, or discharge 4 batteries simultaneously, and independently of each other
• Multiple language support
• Multi-protocol wireless charging of up to 15W for mobile phones, etc
• Supports USB fast charging of up to 65W
• Unit utilizes a 32 Bit Arm processor for high-precision charging management and balancing accuracy to <0.005V

Specs:
Type: ToolkitRC Q6AC 1~6S 15A 400W AC/1000W DC Quad Balance Charger/Discharger w/Wireless Charging
Input Voltage: 7~30V DC/100~240V AC
Charging Power: 4 x 0.1~15A@250W DC/4 x 0.1~15A@100W AC, or 2 x 0.1~15A@250W AC
Discharge Power (Recycle): 4 x 0.1~15A@250W
Discharge Power (Normal): 4 x 0.1~3A@12W
Balance Current: 800mA@2~6S
Battery Types: LiPo/LiHV/LiFe/Li-ion/LTO@1-6S, NiMh@1-16S, Pb@1-10S
Internal Resistance Measurement: 1~100mR@1~6S
USB (Upgrades): USB-A 30W
USB (Charge): USB-C 20V@65W
Supported USB Protocols: PD/QC/AFC/FCP/SCP/PE/SFCP/VOC
Display Screen: IPS full color, wide angle, backlit 2.4"x320x240 resolution LCD
Dimensions: 260x220x120mm
Weight: 1120g
Mains Input: Mains cable w/US type plug
DC Input Connector: XT90

Includes:
1 x ToolkitRC Q6AC 1~6S 15A 400W AC/1000W DC Quad Balance Charger/Discharger w/Wireless Charging
1 x Mains lead w/US type plug

Please note: A copy of the user manual which includes a full list of all the functions is available under the "Manual/Files" tab above.