Eingangsspannung: max. 48V
Kv: 170 rpm / V
Stator Größe: 77x80mm
Äquivalent: 50-70cc Gasmotor
Gewicht ( g)
Kv (rpm / v)
Max Currents (A)
Leistung ( W):
Länge B (mm):
Kann Länge D (mm)
Max Spannung (V)
Welle A ( mm):
Unit Weight (g):
Durchmesser C (mm)
Gesamtlänge E ( mm)
Widerstand ( mh):
Schreiben Sie Ihr eigenes ReviewAmazing, with 120A ESC and 22x12 APC E Prop we pulles 105 A. @ near 18kg of trust!!! The engine is mounted in an verry old but solid 2m Aircraft :-)muito bem acabado e bem maior pessoaalmente, vou usa-lo em um pa-18 com 4m de emvergadura.Just received mine.
Overall looks ok, but.....
1) No Manual is included
2) There is no template for drilling the 4 holes required to fit a propellor
3) The 4 prop bolt heads need to be recessed into the wood of the prop hence you need to drill concentric different diamater holes into the prop in order to fit the front washer and nut. This is not easy to achieve unless you have a vertical drill press.
4) The weight of the motor is 1640 grams and not the advertised 1230 grams. A difference of 410 grams or 33 more. This is bad when you are ordering a motor which needs to fulfill certain weight requirements
Had I known I would have bought the 80-100 which is more powerful. But then again the weight of that one also looks wrong.
Motor works relly well in sensored drive as shown here: http://www.youtube.com/watch?v=3EiDExMfxq0Yikes! The quality control on these motors is kind of lacking. We tore down five of the six 8085s we purchased, and four of them had loose windings (the many-stranded wire had some strands hanging loose into the magnets!). Two had their phase leads rubbing on the bell skirt, which is a guaranteed future short!
Fortunately, it was something a bit of super glue fixed and OMG THEY KICK SO MUCH ASS IT'S FREAKIN INCREDIBLE. HK NEEDS MORE CAPACITY!!here is a test http://www.youtube.com/watch?v=am8b1tFbkQAPowerfull motor. I've use it in my 1:2.6 scale Inland Sport, with 10s 5800mAh LiPo and 28x12 JXF prop. The 14 kg plane is going vertical, and the motor is not warm. Video of maiden here:
My homepage: http://www.smartweb.no/pernil/I have 2 mountain boards with outrunners from here, and you don't need this big unless you want to go over 45 mph. I have a sk5065-270kv on the first one, which is just 1 wheel drive. My second one has 2 sk6374-170kv, had it running 2 sentilon 100amp HV speed controls. Was way to fast had it geared to 45 mph. I stacked the first ride, probably 35 mph then i tried to hit full throttle, wheelied and when came down i speed wobbled.Hi,
Look what I'm doing with this motors.
http://www.evalbum.com/3063I use the new assembled Engines in a Paramotor and they are AWESOME !!!!
Ich benutze die neu gebauten Motoren in einem Paramotor und sie sind der Wahnsinn!!! Die Magneten lsten sich bei den alten, die neuen haben viel bessere Lager und sind so zusammengebaut dass die Magneten sich nicht mehr lsen knne, auch bei voller Power ber Lngere zeit...
Thanks Hobby King for this great product