Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy 1015 Brushless Motor Inrunner 11500kv

Generating Links

Turnigy 1015 Brushless Motor Inrunner 11500kv

Preis:

Now save speichern 0,00 € 0,00 €

11,70 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
C1015-11500
Kostenloser Versand? Klicke hier um mehr zu lernen!
Micro Brushless inrunner.

Spec.
Batterie: 1 Zelle 1S / 3.7V
RPM: 11500kv
Max Strom: 4A
Leerlaufstrom: 3,7 V / 0,4 A
Strombelastbarkeit: 4A / 1sec
Innenwiderstand: 0.51ohm
Abmessungen: 10x15mm
Gewicht: 5,1 g (kv11500) (ohne Stecker)
Der Durchmesser der Welle: 1mm
Länge der vorderen Welle: 5mm
Geeignet für Mini EDF oder Micro Brushless Autos.
  • Kv (rpm / v) 11500.00
  • Max Current (A) 4.00
  • Widerstand ( mh) 0.57
  • Max Spannung (V) 5.00
  • Leistung ( W) 15.00
  • Welle A ( mm) 1.00
  • Länge B (mm) 15.00
  • Durchmesser C (mm) 10.00
  • Kann Länge D (mm) 14.00
  • Gesamtlänge E ( mm) 21.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

TOMRE | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 10, 2012

She's good, a bit bodged, especially considering she caught fire almost immediately but it makes an excellent paperweight. After it has burnt out, I did a watt meter test;

Voltage: 11.1v
Current: 0.0A
Pitch speed: 0kmh
Temperature: 115'C

I highly recommend buying some of these and using them as dead weight to balance your planes. When I no longer have any papers to weigh down with this motor, I will flog it on ebay.

Dave W | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2012

Powered up and works but no other testing yet. Bought this because they are rarely in stock. Don't know what I'm gonna use it in yet. Very tiny motor! I may put it in a small edf or make a tiny profile foam jet. Any ideas? What does everyone else use it for?

mary | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 06, 2012

I bought mine for the micro t, if you want to get it for the micro t you would have to make a custom chassis

joseph | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 08, 2012

i am testing this motor on 3s in the gws 30mmedf and 6blade cut to 3 rotor and the amazing thing it is holding up i havent took amp draw or trust measurements but 10 to 15 sec burst it isnt getting very hot but the motor is turning in its case so i will need to glue it in sense i have no screws for it ill do more testing in the morning probly to the piont i destroy it

emilthesaint | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 03, 2011

Very tiny and light, not too much torque though. Still not sure for what application to use it. Works well with the 3A ESC.

RobT | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 01, 2011

Mine has just arrived but it is ball raced, I have read some reviews that say it is plain bushed. Have HK changed it ?



I intend to use it with 30mm GWS EDF, I can only get a 6 blade impeller, do you cut 3 blades off ?



Thanks



Rob

edf freak | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 30, 2010

wanted to use it with 2S / 300 mah/ 30 mm
6 bladed ducted fan.

low trust, high temperature.

will use it for direct drive,
not for edf anymore.

Kunde | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 22, 2010

Bought one of these to put in a 1S gearbox. Less than 1.6A current will spin a GWS 5030 prop at over 7500 RPM and produce over 50 grams of thrust, using a 4.2:1 gearbox. This just might be my new favorite 1S brushless motor.

Kunde | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 19, 2010

good motor for micro t,not the same umbelivable power that the losi,but cheaper option,for a brushless convertion,use it with 2s lipo,gets a bit hot,but still works fine

bastelspezi | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 12, 2010

very impressive super small motor. this really has some power hidden within. i tested it in the 30mm edf from gws and with 2s lifepo

  1. 1
  2. 2
  3. 3
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!