Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy 3639 Brushless Motor 750KV

Turnigy 3639 Brushless Motor 750KV

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

23,92 €
Status:
Auf Lager
SKU:
T3639-750
WANT FREE SHIPPING? Click here to find out more!
Dimension: 37mm x 42mm, 62mm (mit Welle)
Gewicht: 136g (kv750) (ohne Stecker)
Der Durchmesser der Welle: 5mm
Länge der vorderen Welle: 18,8mm
Schichtstärke:. 2mm
Magnettyp: 45SH

Max Leistung
Spannung: 2-3S
Max Strom: 30 ~ 35A
Prop: 12x8 ~ 14x10
Schub: 1800 ~ 2000g
Leistung: 600W
Für 1500 ~ 2000g 3D-Modellflugzeug.



Download von Daten-Dateien:
Turnigy MOTORDATEN

  • Artikelbezeichnung T3639-750
  • Brand Turnigy
  • Gewicht 209.0000
  • Länge 87.00
  • Packaging Width 47.00
  • Höhe 50.00
  • Kv (rpm / v) 750.00
  • Max Current (A) 35.00
  • Widerstand ( mh) 0.00
  • Max Spannung (V) 11.00
  • Leistung ( W) 600.00
  • Welle A ( mm) 5.00
  • Länge B (mm) 42.00
  • Durchmesser C (mm) 37.00
  • Kann Länge D (mm) 21.00
  • Gesamtlänge E ( mm) 62.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Although this motor is listed as a 3S motor with a maximum of 11 volts it is an excellent motor on 4S with 13" and 14" props. On 3S the current will exceed the specified maximum current of 35 Amps long before you get to the specified maximum of 600 watts. I am using one with a 4S battery with a 13" x 6.5" APC prop and it runs great. Could easily go to a 13" x 8" prop without overloading the motor. I haven't tried it with 4S and 14" props but it should be fine.

Hoby King should revise the motor specs to 4S with a maximum voltage of 16.8 volts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Although this motor is listed as a 3S motor with a maximum of 11 volts it is an excellent motor on 4S with 13" and 14" props. On 3S the current will exceed the specified maximum current of 35 Amps long before you get to the specified maximum of 600 watts. I am using one with a 4S battery with a 13" x 6.5" APC prop and it runs great. Could easily go to a 13" x 8" prop without overloading the motor. I haven't tried it with 4S and 14" props but it should be fine.

Hoby King should revise the motor specs to 4S with a maximum voltage of 16.8 volts.

Ordered it to mein freund. All good nice package, tight packing and all extras included.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered it to mein freund. All good nice package, tight packing and all extras included.

Made my first three flights this morning with this motor in a Gary Wright E3D running a 5000MAH 3s. 12/7 prop pulled 30amps and 350 watts. Problem: bearings are already bad! After less than 10 minutes flying time, I have bearing noise and some prop wobble. Obviously very poor quality bearings used in this motor. Look elsewhere for your next motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Made my first three flights this morning with this motor in a Gary Wright E3D running a 5000MAH 3s. 12/7 prop pulled 30amps and 350 watts. Problem: bearings are already bad! After less than 10 minutes flying time, I have bearing noise and some prop wobble. Obviously very poor quality bearings used in this motor. Look elsewhere for your next motor.

Compre este motor para una piper fun cub de 1,40 metros y funciona perfecto, tiene un funcionamiento muy suave y el avion al 60pcnt de potencia trepa en vertical, ademas no tiene vibraciones ninguna y es muy economico con los consumos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Compre este motor para una piper fun cub de 1,40 metros y funciona perfecto, tiene un funcionamiento muy suave y el avion al 60pcnt de potencia trepa en vertical, ademas no tiene vibraciones ninguna y es muy economico con los consumos.

Use this motor in a 2.2m hotliner, in combination with a 14x8 folding prop, power is awesome

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Use this motor in a 2.2m hotliner, in combination with a 14x8 folding prop, power is awesome

Pulled 54 amps and 796 watts peak on 4s with 1600g sukhoi and a 14x10 tgy light elec prop.Motor gets a little more than handwarm.Had to replace the rear bearing after about 30 flights.Good motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pulled 54 amps and 796 watts peak on 4s with 1600g sukhoi and a 14x10 tgy light elec prop.Motor gets a little more than handwarm.Had to replace the rear bearing after about 30 flights.Good motor

en las especificaciones de da hobbyking de este motor dice que la tension para este motor es de 2 o 3 S pero en este link http://www.hobbycity.com/hobbycity/forum/uploads/84/TURNIGY_BR_Series.zip podeis ver que puede utilizar hasta 5 S (parece mas razonable debido a las revoluciones de este motor ( 750 Kv)) de todas formas , cual de las dos es la correcta ? debiera hobbyking hacer una revision y aclarar este termino

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

en las especificaciones de da hobbyking de este motor dice que la tension para este motor es de 2 o 3 S pero en este link http://www.hobbycity.com/hobbycity/forum/uploads/84/TURNIGY_BR_Series.zip podeis ver que puede utilizar hasta 5 S (parece mas razonable debido a las revoluciones de este motor ( 750 Kv)) de todas formas , cual de las dos es la correcta ? debiera hobbyking hacer una revision y aclarar este termino

En realidad es un 650Kv, pero lleno de fuerza y muy equilibrado

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

En realidad es un 650Kv, pero lleno de fuerza y muy equilibrado

This is an okay motor, the advertised weight is correct in the ad. I purchased this to use in my PA Ultimate AMR. It was a drop-in replacement for the Thrust 40 (size wise), fit the original holes exactly. However, I think this is more of a 4S motor unfortunately. I use a 3s 2200 25C Zippy, 13x8 Turnigy Light electric prop, only got 325 Watts and 29 amps. 13x6.5 APCe prop, got the same results. You either need 14"-15" props with lots of ground clearance or a 4S lipo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is an okay motor, the advertised weight is correct in the ad. I purchased this to use in my PA Ultimate AMR. It was a drop-in replacement for the Thrust 40 (size wise), fit the original holes exactly. However, I think this is more of a 4S motor unfortunately. I use a 3s 2200 25C Zippy, 13x8 Turnigy Light electric prop, only got 325 Watts and 29 amps. 13x6.5 APCe prop, got the same results. You either need 14"-15" props with lots of ground clearance or a 4S lipo.

I have this motor but I'm finding it difficult to find a plane that will accept it. Most planes have the motor mounted with the can in front of the mount. How can you mount this motor in planes where that is the case?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this motor but I'm finding it difficult to find a plane that will accept it. Most planes have the motor mounted with the can in front of the mount. How can you mount this motor in planes where that is the case?

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags