Turnigy 450 H2218 Brushless Outrunner 3200KV

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 08, 2014

Nice motor for scale flying and some stunts, runs smooth and cool when not pushed to its limits. Very good motor for headspeeds around 1600 - 2500 rpm with 10 - 12 teeth pinion gear. Be sure you loctite the little grub screw holding the can on the shaft, it is not secured and could come loose, leaving your heli without power when you need it. After securing this grub screw, the motor is reliable and runs smooth for a long time.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 03, 2013

Turnigy 450 H2218 Brushless outrunner 3200KVTurnigy 450 H2218 Brushless outrunner 3200KV

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 06, 2013

Fine powerful motor for 450 sized copter. I got one in my 450PRo with 4S setup.

• Overall
• Quality
• Value

Customer Rated

Jan 28, 2013

hi put this motor on my 450 PRO, Very nice power in 4S !
Look my vido on this page(test H2218 3200kv).
My setup Heli : 3xHenge MD933
1xTGY 306G
ESC Himodel 60A Gov store
CX-3X1000 Flashed ZYX 3.5
Helical gear 121x11T
Idel 2 at 45pcnt on the vido

• Overall
• Quality
• Value

Customer Rated

Jan 06, 2013

on a 60amp esc (the recmmended is 50amp) and half throttle ,the motor became extremly hot after only few seconds(untouchable) so it melted the hot glue around the mounting plate...very dissapointed..

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 14, 2012

Luft einwandfrei rund. Dieser Motor hat 8 Pole (fr die Programmierung ev. wichtig).

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 06, 2012

Nice quality finish and well balanced and smooth these are a nice quality unit well suited to either heli small prop or edf use

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 30, 2012

Good product at a great price!

• Overall
• Quality
• Value

Customer Rated

Sep 08, 2012

We built this outrunner in a 1/10 kyosho nitro-truggy (kyosho tr-15 st).
It has a lot of power. Great acceleration and good top speed with a 13T pinion gear (also available at hobbyking - but sadly only on the international warehouse.
We use it with the 35A HobbyKing esc. We know it is too small - but it is tho only car esc available from the EU warehouse. And it seems to work really good.
Btw: At first we used a HK inrunner (S2838-2800 Brushless Inrunner) but it got really hot and one day it burned... this outrunner seems to be the better choice - stays cool, no tickling at low speed and a lot of power ;)

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 26, 2012

powerful motor in a T-REX 450 and 3 cells