Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy AE-25A Brushless Regler

Turnigy AE-25A Brushless Regler

Discontinued Product

Please continue searching for a similar product.
SKU:
TAE-25A
WANT FREE SHIPPING? Click here to find out more!

Die Turnigy AE-Serie sind auf neue leistungsstarke Mikroprozessor basiert.
Die neue CPU bedeutet ultraschnelle Sync Timing, schärfere Kehlenantwort, weniger Batteriebelastung und reduziert FET Wärmestau. Auch gibt es eine separate Spannungsregler-IC für den Mikroprozessor bietet gute Anti-Jamming-Fähigkeit.

Spezifikation:
Ausgang: Stetig 25A, 35A Burst bis zu 10 Sekunden.
Eingangsspannung: 2-4 Zellen-Lithium-Batterie oder 5-12 Zellen NiMH-Akku.
BEC: Linear 2A @ 5V
Steuersignalübertragung: Optisch gekoppeltes System.
Höchstgeschwindigkeit:
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000RPM
Größe: 50mm (L) * 26mm (W) * 12mm (H).
Gewicht: 25g.

Eigenschaften:
Hochleistungs-Mikroprozessor bringt mit allen Arten von Motoren die beste Kompatibilität und höchste Fahreffizienz.
Weit offenen Kühlkörper-Design die beste Wärmeableitung Effekt zu erhalten.
Verbesserte Normal, weich, sehr-Soft-Start-Modus, kompatibel mit Flugzeugen und Hubschrauber.
Glatt, linear, schnell und präzise Gasannahme.
Mehrere Schutzfunktionen: Niederspannungsabschaltung Schutz / Hitzeschutz / Drosselsignalverlust Schutz
Programmierbarer über den Sender

Programmierung Features:
Bremseinstellung (wir empfehlen die Verwendung von Bremse für nur Falten Requisiten-Anwendungen)
Batterietyp (Li-xx oder Ni-xx)
Niederspannungs-Cutoff-Einstellung
Werksstandardeinstellungen wiederherstellen
Timing-Einstellungen (zu erhöhen ESC Effizienz und Glätte)
Weiche Beschleunigung Start-ups (für empfindliche Getriebeanwendungen)
Niederspannungs-Cutoff-Typ (Leistungsreduzierung orirnmediate Abschaltung)

Werkseinstellungen:
Brake: off
Akku-Typ: Li-xx (Li-Ion oder Li-Po)
Niederspannungs-Cutoff-Schwelle: Weiche cut-off (2.6V)
Timing-Setup: Low
Weiche Beschleunigung Start Up: Normal
Niederspannungs-Cutoff-Typ: Medium

  • Artikelbezeichnung TAE-25A
  • Brand Turnigy AE
  • Kapazität ( mAh) -
  • Gewicht 39.0000
  • Länge 235.00
  • Breite 10.00
  • Höhe 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The first one of these I bought. Cut out (killed power, once killed all controls) at random times during flight, twice at launch. Replaced with a proven esc on hand and system worked fine. I'm 0 for 1 on these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The first one of these I bought. Cut out (killed power, once killed all controls) at random times during flight, twice at launch. Replaced with a proven esc on hand and system worked fine. I'm 0 for 1 on these.

ESC basique, mais qui joue tr?s bien son r?le. Fonctions de base, programmation avec la radiocommande uniquement car il n'est pas reconnu par la carte de programmation Turnigy Plush, dommage.petit prix, je recommande.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ESC basique, mais qui joue tr?s bien son r?le. Fonctions de base, programmation avec la radiocommande uniquement car il n'est pas reconnu par la carte de programmation Turnigy Plush, dommage.petit prix, je recommande.

Good esc for the price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good esc for the price

I buy this esc and I plug it with the battery and the motor, after I turn on the power and I program the esc. Finaly I try it in my hand, and after few seconds, the reciever reset like when we plug the battery.

I also try it with a HobbyKing esc 20A and it work perfectly!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I buy this esc and I plug it with the battery and the motor, after I turn on the power and I program the esc. Finaly I try it in my hand, and after few seconds, the reciever reset like when we plug the battery.

I also try it with a HobbyKing esc 20A and it work perfectly!

Heavy duty heat sink, this ESC throws tha powah!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Heavy duty heat sink, this ESC throws tha powah!

Excellent ESC. I have started using these in my smaller planes. Have not had any trouble with them. My son also uses these. No problems. Another fine product from Turnigy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent ESC. I have started using these in my smaller planes. Have not had any trouble with them. My son also uses these. No problems. Another fine product from Turnigy.

Connected this today just to be sure it was working fine and item came with full instructions and performed fine. This items has a heat sink on it that I will likely partially expose to allow better airflow over the fins.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Connected this today just to be sure it was working fine and item came with full instructions and performed fine. This items has a heat sink on it that I will likely partially expose to allow better airflow over the fins.

This is strange ? All servos C929MG work fine with a Orange Rx But after abut 60 seconds everything goes dead ??? I have tried different 2200mha 3S lipos and still the same issue ? I have to unplug everything and start again any one else had any similar issues ?

Regards Marc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is strange ? All servos C929MG work fine with a Orange Rx But after abut 60 seconds everything goes dead ??? I have tried different 2200mha 3S lipos and still the same issue ? I have to unplug everything and start again any one else had any similar issues ?

Regards Marc

Bought this for the Hobby King Yak-55. Does not work with 4 servo's - only with 3. The BEC is rated at 2A. When connecting the fourth servo (or Y-Cable to the fourth) the ESC shuts down. The 5,6V line drops to 2,6V and the servo's jitter and the throttle does not work. If you are planning to set up a plane for acrobatics, it will be better to have BEC current of 3A or more. Each of the servos' I used peaked at 450mA and if all four peaks at the same time and you add the 100mA the receiver draws, the margin towards the 2A BEC is not enough. Little dissapointed here, but I guess I should have read the specs more accurately.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this for the Hobby King Yak-55. Does not work with 4 servo's - only with 3. The BEC is rated at 2A. When connecting the fourth servo (or Y-Cable to the fourth) the ESC shuts down. The 5,6V line drops to 2,6V and the servo's jitter and the throttle does not work. If you are planning to set up a plane for acrobatics, it will be better to have BEC current of 3A or more. Each of the servos' I used peaked at 450mA and if all four peaks at the same time and you add the 100mA the receiver draws, the margin towards the 2A BEC is not enough. Little dissapointed here, but I guess I should have read the specs more accurately.

I just bought four of these for my quadcopter. Three worked fine, the fourth smoked after about thirty seconds at idle speed. I put back one of me old ESC's and the quad is working fine now. It looks like it shorted out inside. Noe I have to figure out how to get it replaced from Hobby King.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just bought four of these for my quadcopter. Three worked fine, the fourth smoked after about thirty seconds at idle speed. I put back one of me old ESC's and the quad is working fine now. It looks like it shorted out inside. Noe I have to figure out how to get it replaced from Hobby King.

Customer files
Reference model Download [468]
HK manual TAE ESC Download [109]
Manual Download [945]
Theunsie s setup manual better explaine Download [4]
Programmation Série AE en Français Download [216]
Programaton ESC série AE Download [216]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!