Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Aerodrive SK3 - 2826-1130kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 2826-1130kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

16,45 €
Status:
Auf Lager
SKU:
SK3-2826-1130
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sind der nächste Schritt nach vorn im Motor Qualität und Design. Wir wiesen die Ingenieure die beste Qualität Magnete, Lager und Materialien zur Verfügung zu beziehen und einen Motor zu entwickeln, das würde nicht nur Rivalen, sondern übertreffen die Qualität vieler führender Motor auf dem Markt produziert.

Das Ergebnis ist eine effiziente, hochqualifizierte Motor mit Qualität doppelt geschirmt Lager, gesintertem Neodym-Magneten und eine Schnur gewickelt Stator eine genaue und konsistente Wicklung jedes Mal zu gewährleisten.

Die Turnigy SK3 Motoren sind Modellierer geeignet , die eine Qualität Brushless - Motor ohne Kompromisse suchen.

Specs.
Schaltet: 26T
Spannung: 2 ~ 3S Lipo
RPM / V: 1130 kv
Innenwiderstand: 0,120 Ohm
Max Belastung: 13A
Max Leistung: 125W
Schaft - Durchmesser: 3,0 mm
Bolzenlöcher: 16mm & 19mm
Bolzengewinde: M3
Gewicht: 44 g
Motor Stecker: 3,5 - mm - Rundstecker

  • Artikelbezeichnung SK3-2826-1130
  • Brand SK3
  • Gewicht 114.0000
  • Länge 110.00
  • Packaging Width 45.00
  • Höhe 80.00
  • Kv (rpm / v) 1130.00
  • Max Current (A) 13.00
  • Widerstand ( mh) 120.00
  • Max Spannung (V) 11.00
  • Leistung ( W) 125.00
  • Welle A ( mm) 3.00
  • Länge B (mm) 26.00
  • Durchmesser C (mm) 28.00
  • Kann Länge D (mm) 12.00
  • Gesamtlänge E ( mm) 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Has plenty of torque for a small motor. if you want a motor for a small glider, quad copter or small plane, I recommend this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Has plenty of torque for a small motor. if you want a motor for a small glider, quad copter or small plane, I recommend this motor.

These are nice motors. I bought 3 of them a year ago, and have been happy with all of them. My favourite prop for these has been a BlueBird 9x6E, basically equivalent to the APC 9x6E. (Note that this is NOT the SlowFly prop, although the 9x4.7SF is also decent.) With 2200 mAh, 25C, 3S LiPo and 15A to 18A ESC, one of these will haul 25 oz (700 g) around the sky with authority. Search YouTube for "flying over Rouge Beach" for one example.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are nice motors. I bought 3 of them a year ago, and have been happy with all of them. My favourite prop for these has been a BlueBird 9x6E, basically equivalent to the APC 9x6E. (Note that this is NOT the SlowFly prop, although the 9x4.7SF is also decent.) With 2200 mAh, 25C, 3S LiPo and 15A to 18A ESC, one of these will haul 25 oz (700 g) around the sky with authority. Search YouTube for "flying over Rouge Beach" for one example.

Very good motors, used on quad. everything needed in the box. Just choose your mounting.
A bit of equilibration and done. Multicopter flies superbly with flips. 9x6 props give largely enough thrust. Loops and Rolls.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good motors, used on quad. everything needed in the box. Just choose your mounting.
A bit of equilibration and done. Multicopter flies superbly with flips. 9x6 props give largely enough thrust. Loops and Rolls.

Engine very well balanced. Hardly needed to be balanced. I bought 5 engines and only one required a little adjustment, if you are too picky, otherwise do not require adjustment. Makes very little noise. Undecided what propeller to use, but probably 8" once the engine has a max load of 13A.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Engine very well balanced. Hardly needed to be balanced. I bought 5 engines and only one required a little adjustment, if you are too picky, otherwise do not require adjustment. Makes very little noise. Undecided what propeller to use, but probably 8" once the engine has a max load of 13A.

Very good little motor. Got 4 of them form my quad. Very lightweight, very powerful. Feels more then 125w.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good little motor. Got 4 of them form my quad. Very lightweight, very powerful. Feels more then 125w.

Got these for a quad 450. shiny stainless /chrome appearance. Very smooth and responsive with 30a blue series esc (sim.k firm.). Just warm after 10 minutes flight.Comes with prop adapters but you'll need 3mm mounting screws.
Noticed Motor spins freely and smooth with gentle flick before flight (cold), after flight (warm ),motor wont spin as well. Bearing well lubed with scorpion motor oil. Not sure if its bearing issues ,still very quite and smooth in flight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got these for a quad 450. shiny stainless /chrome appearance. Very smooth and responsive with 30a blue series esc (sim.k firm.). Just warm after 10 minutes flight.Comes with prop adapters but you'll need 3mm mounting screws.
Noticed Motor spins freely and smooth with gentle flick before flight (cold), after flight (warm ),motor wont spin as well. Bearing well lubed with scorpion motor oil. Not sure if its bearing issues ,still very quite and smooth in flight.

I have 8 of these motors on two quads. A couple of them seemed like the bearings were a bit rough at first and they were noisy when running. After a few hours flying time they seem to have smoothed out. Plenty of power using 8x4.7x3 props. I have tried running 10x4.7 two blade and they fly great, but seem a bit warm after an 8 min flight. Quad is more responsive with the 8x4.7 three blade. Hovers at half throttle with both size props. I have some 9x4.7 two blade on the way and will update as to how these work. So far so good. I am running the HK SS Series 18-20 amp ESC and they work fine with this motor. I like the bolt on prop adapter that come with the motors. I have crashed several times with no motor or shaft damage, even though I broke all the blades off the props. I will buy these motors again for my next project. It's going to be real hard to beat these for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 8 of these motors on two quads. A couple of them seemed like the bearings were a bit rough at first and they were noisy when running. After a few hours flying time they seem to have smoothed out. Plenty of power using 8x4.7x3 props. I have tried running 10x4.7 two blade and they fly great, but seem a bit warm after an 8 min flight. Quad is more responsive with the 8x4.7 three blade. Hovers at half throttle with both size props. I have some 9x4.7 two blade on the way and will update as to how these work. So far so good. I am running the HK SS Series 18-20 amp ESC and they work fine with this motor. I like the bolt on prop adapter that come with the motors. I have crashed several times with no motor or shaft damage, even though I broke all the blades off the props. I will buy these motors again for my next project. It's going to be real hard to beat these for the price.

Value plusplusplus! Very smooth acceleration. Very professional in all aspects at a price not really different from the rest. Comes in a sleek black foam padded box along with prop adaptors for whatever end you want to drive your prop from. Gold plugs come already attached so no faulty motor fear from soldering plugs yourself. Spoil yourself!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Value plusplusplus! Very smooth acceleration. Very professional in all aspects at a price not really different from the rest. Comes in a sleek black foam padded box along with prop adaptors for whatever end you want to drive your prop from. Gold plugs come already attached so no faulty motor fear from soldering plugs yourself. Spoil yourself!

These motors are excellent. I bought 5 of these (4plus1 spare) for a quad copter and the 4 I used worked perfectly and consistently. the bearings are smooth, and stayed that way after about an hour of various flying indoor and out in the cold and snow. The insulation is a bit thin though, and one of the wires of one of the motors got knicked in a crash. Still works though ;) I use these with the cheap plastic 8x4.5 props, they work well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors are excellent. I bought 5 of these (4plus1 spare) for a quad copter and the 4 I used worked perfectly and consistently. the bearings are smooth, and stayed that way after about an hour of various flying indoor and out in the cold and snow. The insulation is a bit thin though, and one of the wires of one of the motors got knicked in a crash. Still works though ;) I use these with the cheap plastic 8x4.5 props, they work well.

This is my first aerodrive sk3 motor. I have bought other turnigy motors, but this is the best one I got. Well machined, it's exatly the weight declared. I put it in my acrobatic Oxalis , and you can't almost ear it when it turns. No vibrations at all. I will get a bigger aerodrive SK3 for my Great Planes Spitfire.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my first aerodrive sk3 motor. I have bought other turnigy motors, but this is the best one I got. Well machined, it's exatly the weight declared. I put it in my acrobatic Oxalis , and you can't almost ear it when it turns. No vibrations at all. I will get a bigger aerodrive SK3 for my Great Planes Spitfire.

  1. 1
  2. 2
Customer files
Drawing Download [85]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save