Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Aerodrive SK3 - 3530-1460kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 3530-1460kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

23,04 €
Status:
Auf Lager
SKU:
SK3-3530-1460
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sind der nächste Schritt nach vorn im Motor Qualität und Design. Wir wiesen die Ingenieure die beste Qualität Magnete, Lager und Materialien zur Verfügung zu beziehen und einen Motor zu entwickeln, das würde nicht nur Rivalen, sondern übertreffen die Qualität vieler führender Motor auf dem Markt produziert.

Das Ergebnis ist eine effiziente, hochqualifizierte Motor mit Qualität doppelt geschirmt Lager, gesintertem Neodym-Magneten und eine Schnur gewickelt Stator eine genaue und konsistente Wicklung jedes Mal zu gewährleisten.

Die Turnigy SK3 Motoren sind Modellierer geeignet , die eine Qualität Brushless - Motor ohne Kompromisse suchen.

Specs.
Schaltet: 22T
Spannung: 2 ~ 3S Lipo
RPM / V: 1.460 kv
Innenwiderstand: 0,045 Ohm
Max Belastung: 33A
Max Leistung: 430W
Wellen - Ø: 4,0mm
Bolzenlöcher: 25mm
Bolzengewinde: M3
Gewicht: 75g
Motor Stecker: 3,5 - mm - Rundstecker

  • Artikelbezeichnung SK3-3530-1460
  • Brand SK3
  • Gewicht 170.0000
  • Länge 110.00
  • Packaging Width 45.00
  • Höhe 80.00
  • Kv (rpm / v) 1460.00
  • Max Current (A) 33.00
  • Widerstand ( mh) 45.00
  • Max Spannung (V) 11.00
  • Leistung ( W) 430.00
  • Welle A ( mm) 4.00
  • Länge B (mm) 31.00
  • Durchmesser C (mm) 37.00
  • Kann Länge D (mm) 10.00
  • Gesamtlänge E ( mm) 52.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good motor for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor for the price.

Smooth running, good quality.

Testet 8x5 sport Propeller. Unless it is an "E" Proppel or a bigger one a 8x5 is too small. In Comparison with motor size and amp capabilities

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Smooth running, good quality.

Testet 8x5 sport Propeller. Unless it is an "E" Proppel or a bigger one a 8x5 is too small. In Comparison with motor size and amp capabilities

Motor has terrible vibration and it is unusable. Even with no propeller it makes strange noises. Bearings or shaft is bad. I will need to buy some other more quality motor...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor has terrible vibration and it is unusable. Even with no propeller it makes strange noises. Bearings or shaft is bad. I will need to buy some other more quality motor...

Flies in my Cosmic Wind<br>

On 3S1P 2200mAh<BR>
With an APC 8x6E prop - 384W at 34A<br>
With an APC 8x8E prop - 430W at 43A<br>
<br>
On 4S1P 2200mAh<br>
With an APC 8x6E prop - 599W at 41A<br>

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flies in my Cosmic Wind<br>

On 3S1P 2200mAh<BR>
With an APC 8x6E prop - 384W at 34A<br>
With an APC 8x8E prop - 430W at 43A<br>
<br>
On 4S1P 2200mAh<br>
With an APC 8x6E prop - 599W at 41A<br>

Very nice motor and I highly recommend these as a very good value. Nice accessory pack with prop adapters for front or rear mount and nice mount. 378Watt; 36 amps with 2200mAh 30C Lipo and 9x4 APC (genuine not copy) prop. cruise (50pcnt throttle over five minutes) I get about 135W or - a 10 inch prop beyond the safe limit, but in reality the RPMs are likely well below theoretical, unfortunately I don't have good enough lighting to get a reliable reading from my prop Tacho. Powers my 820g AUW 1000mm wingspan scratch build Spitfire perfectly, great power at cruise, and unlimited vertical at less than 3/4 throttle. Handled a straight in WOT crash on first scratch build without a scratch... loads of mud cleaned out with HOT water jet, WD40 soak, and machine oil lube ... makes a bit of bearing noise now but runs great ... two dozen flights since and going great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice motor and I highly recommend these as a very good value. Nice accessory pack with prop adapters for front or rear mount and nice mount. 378Watt; 36 amps with 2200mAh 30C Lipo and 9x4 APC (genuine not copy) prop. cruise (50pcnt throttle over five minutes) I get about 135W or - a 10 inch prop beyond the safe limit, but in reality the RPMs are likely well below theoretical, unfortunately I don't have good enough lighting to get a reliable reading from my prop Tacho. Powers my 820g AUW 1000mm wingspan scratch build Spitfire perfectly, great power at cruise, and unlimited vertical at less than 3/4 throttle. Handled a straight in WOT crash on first scratch build without a scratch... loads of mud cleaned out with HOT water jet, WD40 soak, and machine oil lube ... makes a bit of bearing noise now but runs great ... two dozen flights since and going great!

Current draw with a 8x3.8 prop = 34 amps (peak). Seems to be the recommended prop for this motor. Haven't checked the flight performance yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Current draw with a 8x3.8 prop = 34 amps (peak). Seems to be the recommended prop for this motor. Haven't checked the flight performance yet.

Ein Qualitativ hochstehender Antrieb. Sehr schn verarbeitet, smliches bentigtes Zubehr inklusive. Sehr gut verpackt, verwende ihn in einem You can Fly von Hype, zusammen mit dem 40A BlueSeries Brushless Speed Controler als Ersatz fr die abgebrannte Originalausrstung.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ein Qualitativ hochstehender Antrieb. Sehr schn verarbeitet, smliches bentigtes Zubehr inklusive. Sehr gut verpackt, verwende ihn in einem You can Fly von Hype, zusammen mit dem 40A BlueSeries Brushless Speed Controler als Ersatz fr die abgebrannte Originalausrstung.

, 10*6, 35-70 3S 55A , 3 0.35 1 0.25, 4 0.35 , .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, 10*6, 35-70 3S 55A , 3 0.35 1 0.25, 4 0.35 , .

Hi, im using it with turnigy plush 40a and 11x6 carbon fibre folding prop on my phoenix 1600 glider , it is super power full , very pleased with it .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, im using it with turnigy plush 40a and 11x6 carbon fibre folding prop on my phoenix 1600 glider , it is super power full , very pleased with it .

you cannot use full power running a 10x6 folding prop. i just burn my motor. use 9 or 8 inch props with this motor. oh well, would be nice if prop sizes were tested to go with the motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

you cannot use full power running a 10x6 folding prop. i just burn my motor. use 9 or 8 inch props with this motor. oh well, would be nice if prop sizes were tested to go with the motor.

  1. 1
  2. 2
Customer files
SK3-3530(DT3007-14P) MOTOR (edited).pdf Download [131]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save