Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Aerodrive SK3 - 3548- 1050kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 3548- 1050kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

33,89 €
Status:
Auf Lager
SKU:
SK3-3548-1050
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors sind der nächste Schritt nach vorn im Motor Qualität und Design. Wir beauftragt, unsere Ingenieure die besten Qualitätskomponenten zur Verfügung zu Quelle und einen Motor zu entwickeln, die die Qualität von vielen führenden Automobilhersteller auf dem Markt übertreffen würde.

Das Ergebnis ist eine effiziente, qualitativ hochwertige Motor doppelt geschirmt Lager mit, gesintertem Neodym-Magneten und eine Schnur gewickelt Stator eine robuste, präzise und konsistente Wicklung jedes Mal zu gewährleisten.

Die Turnigy SK3 Motoren sind Modellierer geeignet, die eine Qualität Brushless-Motor ohne Kompromisse suchen.

Specs:
Schaltet: 8T
Kv: 1050
Innenwiderstand: 0,016 Ohm
Spannung: 11,1 ~ 14,8 V (3 ~ 4S LiPoly)
Max Belastung: 50A max
Leistung: 820W
Wellendurchmesser: 5,0 mm
Befestigungsschrauben: 25mm x M3
Anschlüsse: 3,5 mm Kugel
Gewicht: 176g

  • Artikelbezeichnung SK3-3548-1050
  • Brand SK3
  • Gewicht 292.0000
  • Länge 110.00
  • Packaging Width 40.00
  • Höhe 80.00
  • Kv (rpm / v) 1050.00
  • Max Current (A) 50.00
  • Widerstand ( mh) 16.00
  • Max Spannung (V) 15.00
  • Leistung ( W) 820.00
  • Welle A ( mm) 5.00
  • Länge B (mm) 50.00
  • Durchmesser C (mm) 37.00
  • Kann Länge D (mm) 28.00
  • Gesamtlänge E ( mm) 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Installed this Motor in an Multiplex Mentor in combinaten with 3S Lipos and a 11x5,5 Electric prop. Runs amazingly smooth and quiet and just gets slightly warm after 20 min of flying. 5 STARS!

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Installed this Motor in an Multiplex Mentor in combinaten with 3S Lipos and a 11x5,5 Electric prop. Runs amazingly smooth and quiet and just gets slightly warm after 20 min of flying. 5 STARS!

On receiving the motor, I needed to reverse the shaft - whilst trying to loosen the 2 grub screws on the shaft, one of the screws stripped out. Impossible to remove as it was flush with the shaft.

Sent back to hobbyking, who delivered a new one. (very good service by the way) Opened up new motor to reverse shaft and exactly the same thing happened.

Grub screws are made of extremely soft metal. Not impressed with the quality - although in fairness, it isn't an expensive motor. Sent the second one back and gave up on the motor. I think the saying - 'You get what you pay for' holds true when it comes to electric motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

On receiving the motor, I needed to reverse the shaft - whilst trying to loosen the 2 grub screws on the shaft, one of the screws stripped out. Impossible to remove as it was flush with the shaft.

Sent back to hobbyking, who delivered a new one. (very good service by the way) Opened up new motor to reverse shaft and exactly the same thing happened.

Grub screws are made of extremely soft metal. Not impressed with the quality - although in fairness, it isn't an expensive motor. Sent the second one back and gave up on the motor. I think the saying - 'You get what you pay for' holds true when it comes to electric motors.

Well made and very light I like the overall product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well made and very light I like the overall product.

Great motor, better than Axi 2820/08 for my Multiplex Tucan.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, better than Axi 2820/08 for my Multiplex Tucan.

good Turnigy Aerodrive SK3 - 3548- 1050kv Brushless Outrunner Motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good Turnigy Aerodrive SK3 - 3548- 1050kv Brushless Outrunner Motor

Purchased two of this motor, First impression seems to be nice quality for the money, nice packaging and well protected. Accessory kit is also very decent quality
I did notice there to be a few looser windings on one of the stator arms that they kind of just mushed them over to make them lay down for clearance, but not to serious.
Upon installing the first of my two new motors I removed the bell to inspect and oil the bearings and found the two front bearings to be less then smooth, Back bearing is fine.
I oiled them up and reassembled it, run it up and sure enough those bearings are done within 5 minutes of running.
There is a bearing kit available SKU: 192000081 But I think I will go to Boca and search out a quality bearing.
I do like the availability of shafts and accessory kits for this motor and the power does seem very good. All in all I would rate this a good motor with poor quality bearings. Expect to replace them.
3 crowns for value for poor bearings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased two of this motor, First impression seems to be nice quality for the money, nice packaging and well protected. Accessory kit is also very decent quality
I did notice there to be a few looser windings on one of the stator arms that they kind of just mushed them over to make them lay down for clearance, but not to serious.
Upon installing the first of my two new motors I removed the bell to inspect and oil the bearings and found the two front bearings to be less then smooth, Back bearing is fine.
I oiled them up and reassembled it, run it up and sure enough those bearings are done within 5 minutes of running.
There is a bearing kit available SKU: 192000081 But I think I will go to Boca and search out a quality bearing.
I do like the availability of shafts and accessory kits for this motor and the power does seem very good. All in all I would rate this a good motor with poor quality bearings. Expect to replace them.
3 crowns for value for poor bearings.

guter Motor luft gut mit 4S. Prop. 12x6 Power genug fr meine DO 27 3,8 Kg

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

guter Motor luft gut mit 4S. Prop. 12x6 Power genug fr meine DO 27 3,8 Kg

Very powerfull power.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerfull power.

Well made motor and accessories. Nice to have flexible silicon coated wires on a motor for a change. Vibration free and easy to install.

Put it in my 1250mm Tigermoth and it max's out at 30 amps on 3S with an 11 x 4 Master Airscrew prop and 39 amps with 11 x 5.

I am going to go with the 11 x 4.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well made motor and accessories. Nice to have flexible silicon coated wires on a motor for a change. Vibration free and easy to install.

Put it in my 1250mm Tigermoth and it max's out at 30 amps on 3S with an 11 x 4 Master Airscrew prop and 39 amps with 11 x 5.

I am going to go with the 11 x 4.

warto zaplacic kilka dolarw wiecej za ta seie silnikw , rznice widac i slychac

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

warto zaplacic kilka dolarw wiecej za ta seie silnikw , rznice widac i slychac

  1. 1
  2. 2
Customer files
SK3-3548(DT3025-14P) MOTOR (edited).pdf Download [128]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save