Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Aquastar 3520-1700KV Wassergekühlte Brushless Outrunner Motor

Generating Links

Turnigy Aquastar 3520-1700KV Wassergekühlte Brushless Outrunner Motor

Preis:

Now save speichern 0,00 € 0,00 €

24,83 €
Status:
Ausverkauft!
SKU:
9357000003-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der Turnigy Aquastar 3520-1700KV Brushless-Motor bietet hervorragende Leistung für Ihr Boot zu einem unglaublichen Preis!

Mit einer Qualität CNC-gefräste Aluminium-Motor kann, mit Handaufzug hochreinen Kupferwicklungen und leistungsstarke gesinterte Neodym-Magnet, werden Sie keinen besseren Preis Motor dieses Kalibers finden anderswo! Es verfügt über einen Aluminium-Wasserkühlmantel vorinstalliert und verfügt über eine Umluftkühlventilator für zusätzliche Kühlung in Ihrem Boot vormontiert.

Die Aquastar Brushless-Motoren sind eine gute Wahl für Ihre tiefe V, Hydro oder Boot Katamaran-Rennen und wird sicher sein, den Wettbewerb in Ihrem Gefolge zu verlassen!

Eigenschaften:
• CNC-gefräste Aluminium-Motor kann
• Hochreiner Kupferwicklungen
• 3,5-mm-Kugel-Anschlüsse vorinstalliert
• Inklusive 3,5-mm-Kugel-Anschlüsse für Ihre ESC
• Leistungsstarke gesinterte Neodym-Magnet
• Präzision entwickelt für maximale Energieumwandlung
• Wasserkühlmantel und Lüfter vorinstalliert


Specs:
RPM / V: 1700KV
Max Spannung: 14,8 V (4S)
Max Strom: 50A
Max Watt: 750W
Widerstand: 0.021ohm
Nein Ladestrom: 1.2A
Durchmesser: 35.4mm (tatsächliche Motor Durchmesser)
Länge: 62 mm
Schachtgröße: 5mm
Schaftlänge: 14,5 mm
Gewicht: 188 g

  • Kv (rpm / v) 1700.00
  • Max Current (A) 50.00
  • Widerstand ( mh) 0.00
  • Max Spannung (V) 15.00
  • Leistung ( W) 750.00
  • Welle A ( mm) 5.00
  • Länge B (mm) 62.00
  • Durchmesser C (mm) 35.00
  • Kann Länge D (mm) 37.00
  • Gesamtlänge E ( mm) 77.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Phil | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Excellent motor!

Jul 07, 2020

Runs the K&B 28mm water jet brilliantly on a 3 cell.
Yup, mine leaked water as well. Not much but also an easy fix by mixing a small amount of epoxy glue and filling the void where the wires enter the body. No more worries.

Scott | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great for the price!

Jun 24, 2020

Read other reviews stating it leaks water. Haven’t noticed that on mine but in a jet boat that eventually gets water in it anyway. I just glued up the spot where the wires enter as others have mentioned and it hasn’t caused any issues

Rowen | Verifizierter Käufer

  • Overall
  • Quality
  • Value

LEAKS

Mar 17, 2020

Bought two, both leaked.
There are copious reports on this problem and the suggested solution. Seems the water comes out through the wire aperture and not from the shaft seal. Which was also my experience.
Reported in to HK, but could see little point in sending back as probem is endemic to this motor. Out of stock anyway.
Decided to squeeze silicon sealant all around the wires to seal the aperture, fortunately had good access..
After a short amount of running, leak seems to be cured. Going to continue with model into further test runs but think problem is solved.

Phil | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great little motor.

Sep 15, 2019

I bought 3 and they all leaked but it's really easy to fix which I did to all three motors. They leak where the wires come out of the cooling ring. There is a space around the wires where they enter. Simply mix a bit if epoxy glue and pour it into the area around the base of the wires. Don't over fill. It only takes a small amount and it doesn't seem to enter the workings of the motor. Only put glue on the cooling ring area otherwise your going to glue the two parts of the motor together. You can test by blowing through the cooling tube and blocking the other end. If it leaks you'll hear it. Cheers and happy boating.

rinse | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Turnigy AquaStar 3520-1700KV

Dec 29, 2017

good powerfull motor , after ordering i got a leaking one , hk replaced it and now its ok , good power with 4s in a jet boat

Peter | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2015

nice Motor, good looking, powerful, but - I should have read the reviews before - it's leaking like hell. Gotta find another one and ask for refund for this. Can only recommend not to buy this one :(

Michio | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2015

Mine is leaking too, most of the water exits the motor via the axle. Will try to fix, after de-installing the fan you can unscrew the axle and open the motor. A bit dissapointed but should have read the reviews before buying.

Eddy | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2015

I purchased two, sending two back, leaks around shaft, should have headed other reviews.
Very tedious sending back and then I have to reconfigure the boat.

player1212 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 13, 2015

Two of purchased engines were leaking, moreover the replacement were leaking too. Now I have four leaking motor... So I don't recommend buying this part.

dexter70 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2014

I have bought this motor but its in the trashcan now.
The watercooling was leak and was running water right in the motor.

  1. 1
  2. 2
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!