Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy Glocke 2409 1600kv Kundschafterschulterstücke

Generating Links

Turnigy Glocke 2409 1600kv Kundschafterschulterstücke

Preis:

Now save speichern 0,00 € 0,00 €

5,79 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
TR_2409_1600
Kostenloser Versand? Klicke hier um mehr zu lernen!

Die Turnigy Glocke Motor aussieht und läuft genau das gleiche wie das Towerpros, bei 2/3 der Kosten!

Turnigy Glocke 2409 1600Kv

Gewicht: 56 g
Spannung: 10 V (2 ~ 3 Zellen Lipo-Pack)
Ruhestrom: 0,9
Kv: 1600
Schaft: 3 mm Durchmesser
Max effiziente Strom: 15A
Max Belastung: 20A
Max Leistung: 180W
Empfohlene Propeller: 9x3.8 E- Propeller

* Dies wird durch TowerPro nicht gemacht.

  • Kv (rpm / v) 1600.00
  • Max Current (A) 20.00
  • Widerstand ( mh) 0.00
  • Max Spannung (V) 10.00
  • Leistung ( W) 180.00
  • Welle A ( mm) 3.00
  • Länge B (mm) 37.00
  • Durchmesser C (mm) 31.00
  • Kann Länge D (mm) 12.00
  • Gesamtlänge E ( mm) 64.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

ikahraman | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 19, 2011

Katalog bilgileri dahilinde kullanlabilir bir motor.

Foamflyer | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2011

With Towerpro 8x3.8 prop and Turnigy 3S1800, I measure 10.6 volts, 26 amps, 277 watts. A pleasant surprise since it's more power than the similar Towerpro motors, but a little disappointing since I was using a 25-amp controller! Controller got warm and cut out, should be OK. This is one of my favorite battery/motor/prop combinations, I'll see about getting some 30-amp controllers.

hipertommy | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 24, 2011

nice motor good and economic

totovz | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 17, 2011

Superior engine for small money.

Works very well and has a lot of power.

It is much better prepared and better than the same product TowerPro.

5 stars!

Flip__3D | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 16, 2011

I give this motor 5 starts becuse of how powerful it is but DO NO use any bigger prop then 7x5 or your frie ur motor as i did to two of mne :P sucked , but theres a looooooad of poer in this baby.

rog123 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2011

i made a set up for my axn floater and because i don't have the choice I use this motor with a 6x4e prop with 4s 2200 zippy and give me a good performance at 245watt and 15 A at full trottle but anyway the motor have enougth cooling so for now leave it like that but if can find a 2200kv motor will be better !

ottoha | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 12, 2011

als Alternative zum Towerpro

2409-12T

noch nicht getestet.

Qualitativ guter Eindruck !

Rooks | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2011

Energy saving motor when use it on 7x6E to fly parkjet. you can easily fly 8-10mins with 2200mah 3s. But the shaft is unchangeable making it less perfect

DavidB CZ | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2011

TGS 8x4E, 3S 1300 Turnigy 20C, Tower pro 40A - 200W for F4U fighter "pirate" or ME-109 from HK

Sumeet | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 24, 2011

The magnets are strong and seems like stopping the bell from rotating easily. But checked again and powered it with 2200mAh 2S Lipo. The motor runs fine. Nice product for the price.

Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!