Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy CA120 150kV Brushless Outrunner (100cc equiv)

Turnigy CA120 150kV Brushless Outrunner (100cc equiv)

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

302,96 €
Status:
Auf Lager
SKU:
12070-15-150
WANT FREE SHIPPING? Click here to find out more!

Konzipiert als 100cc Gasmotor Ersatz dieser Motor ist eine großartige Alternative für 3D und Sportflugzeuge bis 35kg!

Der Motor ist sehr gut mit starken Befestigungen, Ende Glocke und eine konzentrische Doppellager auf der Rückseite eingebaute große Propeller und Drehen möglich zu unterstützen, vor allem bei harten 3D-Flug.

Dieser Motor ist sehr gut entwickelt und von höchster Qualität.
Die Fabrik kann bei der Abwägung und Bearbeitung ein so großes Objekt nur eine begrenzte Anzahl dieser Motoren pro Monat aufgrund der erhöhten Zeit produzieren.


Spec.
Modell: 120-70-15
Widerstand: 0.004ohm
ESC erforderlich: 250A
Eingangsspannung: 30 ~ 70V
Kv: 150 rpm / V
Gewicht: 2730g
Schaft: 10mm
20v Nichtlaststrom: 13A @ 20V
Maße: 150x120x118mm (einschließlich Mount)
Äquivalent: 100cc Twin Gasmotor (20 PS +)

  • Artikelbezeichnung 12070-15-150
  • Brand Turnigy
  • Gewicht 3752.0000
  • Länge 170.00
  • Breite 155.00
  • Höhe 160.00
  • Kv (rpm / v) 150.00
  • Max Current (A) 0.00
  • Widerstand ( mh) 5.00
  • Max Spannung (V) 70.00
  • Leistung ( W) 0.00
  • Welle A ( mm) 10.00
  • Länge B (mm) 120.00
  • Durchmesser C (mm) 118.00
  • Kann Länge D (mm) 58.00
  • Gesamtlänge E ( mm) 150.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ich betreibe diesen "Monstermotor" mit 12 und mit 14s!
In beiden Konfigurationen hat er ausreichend Leistung für jedes Flugzeug bis 20 kg Abfluggewicht.
Mein Doppeldecker (Ultimate) mit 2,45 m Spannweite geht endlos senkrecht!
Der Motor ist uneingeschränkt zu empfehlen!
Man darf jedoch keine Angst vor brachialer Brushlesspower haben.
Viele meiner Fliegerkollegen machen einen großen Bogen um das Flugzeug sobald die Akkus scharf geschaltet sind!

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

Ich betreibe diesen "Monstermotor" mit 12 und mit 14s!
In beiden Konfigurationen hat er ausreichend Leistung für jedes Flugzeug bis 20 kg Abfluggewicht.
Mein Doppeldecker (Ultimate) mit 2,45 m Spannweite geht endlos senkrecht!
Der Motor ist uneingeschränkt zu empfehlen!
Man darf jedoch keine Angst vor brachialer Brushlesspower haben.
Viele meiner Fliegerkollegen machen einen großen Bogen um das Flugzeug sobald die Akkus scharf geschaltet sind!

i am running this motor with fat boy speedy on 2x 4x 3s 5000ma turnigy lipo batteries in parallel with a 28x12 pt prop flying 3D getting about 10 minutes flight with about 50pcnt battery charge left hope to learn how to download darta next and will repost the results shortly regards john snr.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i am running this motor with fat boy speedy on 2x 4x 3s 5000ma turnigy lipo batteries in parallel with a 28x12 pt prop flying 3D getting about 10 minutes flight with about 50pcnt battery charge left hope to learn how to download darta next and will repost the results shortly regards john snr.

this motor made by Zhuhai GS Model Accessories MFG., Ltd.
Hobbyking descriptions and product configuration table don't match the product. Hobbyking, could you fix it please to prevent confusion. I bought one already until I discover the manufacturer website. they have the bigger version, which what I want for my application. It's the CA 120-80-13 , 15000W, 130kV. Hobbyking, when are you going to list this motor ? thank you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motor made by Zhuhai GS Model Accessories MFG., Ltd.
Hobbyking descriptions and product configuration table don't match the product. Hobbyking, could you fix it please to prevent confusion. I bought one already until I discover the manufacturer website. they have the bigger version, which what I want for my application. It's the CA 120-80-13 , 15000W, 130kV. Hobbyking, when are you going to list this motor ? thank you.

Hello everyone, I just bought this motor and Fatboy300 ESC. can someone advice me what size propeller and what battery set up do I need to achieve the MAXIMUM output power (thrust ?). I was thinking to purchase 6 packs of 5cells nanotech 5000mAh, 45C-90C discharge rate. making 15cells 10000mAh unit. Any advice if this is good ? Thank you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello everyone, I just bought this motor and Fatboy300 ESC. can someone advice me what size propeller and what battery set up do I need to achieve the MAXIMUM output power (thrust ?). I was thinking to purchase 6 packs of 5cells nanotech 5000mAh, 45C-90C discharge rate. making 15cells 10000mAh unit. Any advice if this is good ? Thank you.

1st: Very good Quality!
2nd: PLEASE OFFER SOME SPARE PARTS FOR THIS MOTOR HOBBYKING!!! I ordered now 3 from this motors. After 2 crashes (my fault), the engine shaft is bent and i think also the front and rear plate (the rotating ones) and also the prop-shank. It would be great, if you can sell these 4 spare parts in your shop Hobbyking!? 300 bucks for this motor is cheap, yes, but too expensive if you must buy a complete new motor after a crash.
3rd: Here are some test results: 2,6m Edge 540t from xtreme composite, flying weight 18kg, Turnigy 2200 mah 12s4p, 26x10 carbon-prop from Hobbyking, 6600 rpm, 150A, torqueroll not really possible, thrust is about also 18kg. 27x10 Carbon-prop from HK, 6300 rpm, 180A, better torque performance but I think a 28x10 Carbon-prop would be perfect for this heavy model! Best wishes from Europe, Michael

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

1st: Very good Quality!
2nd: PLEASE OFFER SOME SPARE PARTS FOR THIS MOTOR HOBBYKING!!! I ordered now 3 from this motors. After 2 crashes (my fault), the engine shaft is bent and i think also the front and rear plate (the rotating ones) and also the prop-shank. It would be great, if you can sell these 4 spare parts in your shop Hobbyking!? 300 bucks for this motor is cheap, yes, but too expensive if you must buy a complete new motor after a crash.
3rd: Here are some test results: 2,6m Edge 540t from xtreme composite, flying weight 18kg, Turnigy 2200 mah 12s4p, 26x10 carbon-prop from Hobbyking, 6600 rpm, 150A, torqueroll not really possible, thrust is about also 18kg. 27x10 Carbon-prop from HK, 6300 rpm, 180A, better torque performance but I think a 28x10 Carbon-prop would be perfect for this heavy model! Best wishes from Europe, Michael

The photos and video of my World Models 42pcnt Ultimate say it all.

Add the appropriate WWW header to the link below.

rcuniverse.com/forum/m_9933628/anchors_10551694/mpage_12/key_/anchor/tm.htm#10551694

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The photos and video of my World Models 42pcnt Ultimate say it all.

Add the appropriate WWW header to the link below.

rcuniverse.com/forum/m_9933628/anchors_10551694/mpage_12/key_/anchor/tm.htm#10551694

I see some one has sent a test report using 14s lipols. Just a little warning, 14s lipols exceeds 50volt DC . Check your local electrical supply regulations. 95 of the worlds electrical regulators require a registered electrician to work on any thing over this voltage, and to provide an electrical permit! This is because 50 volts DC has the potential to KILL. Please take this warning seriously as criminal charges can result.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I see some one has sent a test report using 14s lipols. Just a little warning, 14s lipols exceeds 50volt DC . Check your local electrical supply regulations. 95 of the worlds electrical regulators require a registered electrician to work on any thing over this voltage, and to provide an electrical permit! This is because 50 volts DC has the potential to KILL. Please take this warning seriously as criminal charges can result.

Mine arrived now and I must say: WOOOW, perfect quality, all magnets (28) are installed in the right position! I dont let it run at this time, so i can tell you nothing about the performance, but the motor is also BALANCED!! Cant wait to power my 2,4m EDGE with it! Ps.: I ordered 25 Turnigy 3s 2200 40C for this monster too! Best price: Only 15 $/pack!!! And they are MATCHED!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine arrived now and I must say: WOOOW, perfect quality, all magnets (28) are installed in the right position! I dont let it run at this time, so i can tell you nothing about the performance, but the motor is also BALANCED!! Cant wait to power my 2,4m EDGE with it! Ps.: I ordered 25 Turnigy 3s 2200 40C for this monster too! Best price: Only 15 $/pack!!! And they are MATCHED!

WOW.. I just recived mine. This thing is nuts, looks really well made. Modified the heat wrap going in to the motor to be a bit more sustantial though. Have a good look for a speed controller to run this beast. there are not many around.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WOW.. I just recived mine. This thing is nuts, looks really well made. Modified the heat wrap going in to the motor to be a bit more sustantial though. Have a good look for a speed controller to run this beast. there are not many around.

I am testing the CA120-70 motor for use in my World Models 42 Ultimate conversion to electric power. For details, photos, and videos, check out my build thread on RC Universe.

http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=14427

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am testing the CA120-70 motor for use in my World Models 42 Ultimate conversion to electric power. For details, photos, and videos, check out my build thread on RC Universe.

http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=14427

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!