Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Turnigy DLUX 80A HV Brushless-Regler (OPTO)

Turnigy DLUX 80A HV Brushless-Regler (OPTO)

Discontinued Product

Please continue searching for a similar product.
SKU:
TGY_DEL80HV
WANT FREE SHIPPING? Click here to find out more!

Turnigy® DLUX WSR haben eine neue Benchmark in Qualität und Leistung setzen. Jeder ESC verwendet eine Doppel PCB-Design-Spannungsversorgung des Motors und MCU trennen. Diese Konstruktion ermöglicht eine optimale Anordnung der Komponenten auf jeder Leiterplatte und bietet die ideale Konfiguration für die Wärmeableitung und thermischen Wirkungsgrad. Beide Platinen werden in einem vollen Aluminium-Kühlkörper Gehäuse eingeschlossen, um maximale Wärmeableitung zu gewährleisten. Alle Turnigy DLUX WSR kann über eine programing Karte oder per Sender programmiert werden. Klare und leicht verständliche Anweisungen enthalten sind.

Spec.
Max Cont Strom: 80A
Max Burst Strom: 95A
BEC: N / A
LiPo: 6 ~ 12S
NiMH: 16 ~ 36cells
Gewicht: 112grams
Max RPM (2-polig): 200,000rpm
Größe: 52 x 33 x 23mm
Motor Stecker: Weiblich 4mm Kugel - Anschluss
Batterie - Stecker: Nil
Features: Spark - Eliminator Blei mit 2mm Stecker

Eigenschaften.
Extrem niedrige Innenwiderstand
Sehr niedrige Betriebstemperatur
Übertemperaturschutz
APEC-MOSFETS (Taiwain)

Programmiermöglichkeiten.
Akku-Typ: 6S ~ 12S
Vorwärts, rückwärts
Weicher Start
LV Cut off Typ (Ignorieren, Reduce Leistung, Stopp-Motor)
LV Cut off-Einstellung (2,5 ~ 3,5 V in 0,1 V-Schritten)
Timing (Auto, Sehr niedrig, Niedrig, Normal, Hoch, Sehr hGH)
Switching (8,16kHz)
Werkswiederherstellung
Aktive RPM-Steuerung: Ein / Aus (Governor Modus)

Standardwerkseinstellungen.
Brake: off
Akku: LiPo Auto Detect
Low Voltage: 3,2 V (Power-Down-Motor)
Timing: Auto
Frequenz: 8 kHz

Hinweis: Die Programmierung Box ab sofort verfügbar, überprüfen Sie die zugehörige Artikel unten.

  • Artikelbezeichnung TGY_DEL80HV
  • Brand DLUX
  • Kapazität ( mAh) -
  • Gewicht 153.0000
  • Länge 140.00
  • Packaging Width 27.00
  • Höhe 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I purchased this speed controller after the one I wanted was out of stock. I am running 12s on a large turnigy aerodrive motor on a Sig Rascal 110 inch. I have not been able to get it to function with 12s. First I thought it was my solder connections, but I redid them all and they are good. I discovered it runs perfectly on one 6s battery. I am programming with the transmitter. Also, some of the description on this page is incorrect. It does not autosense cells and the timing only does automatic, medium and high. I am waiting on the programming box to get here. Maybe I will have better luck with that. If it ends up working on 12s I will amend my review. Right now I cannot use it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this speed controller after the one I wanted was out of stock. I am running 12s on a large turnigy aerodrive motor on a Sig Rascal 110 inch. I have not been able to get it to function with 12s. First I thought it was my solder connections, but I redid them all and they are good. I discovered it runs perfectly on one 6s battery. I am programming with the transmitter. Also, some of the description on this page is incorrect. It does not autosense cells and the timing only does automatic, medium and high. I am waiting on the programming box to get here. Maybe I will have better luck with that. If it ends up working on 12s I will amend my review. Right now I cannot use it.

as i have got the 55 low vloltage, i needed

a HV esc so i gave it a go.

Well All i can say it IS as good as a Castle

very smooth ran 8 cell on a AXI 4130/16

was over 2000watts very easy no drama, just got on with it

yes i would get another one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

as i have got the 55 low vloltage, i needed

a HV esc so i gave it a go.

Well All i can say it IS as good as a Castle

very smooth ran 8 cell on a AXI 4130/16

was over 2000watts very easy no drama, just got on with it

yes i would get another one

Used the programming box to set-up, running 12s @ 60A full load current, can't fault it prefer it to my Hobbywing 100A HV ESC. Very good value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used the programming box to set-up, running 12s @ 60A full load current, can't fault it prefer it to my Hobbywing 100A HV ESC. Very good value.

Horrible. Lit on fire while on a SK3 6374. Burned my model down.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Horrible. Lit on fire while on a SK3 6374. Burned my model down.

Running an APC 16x12 on 8 cells works perfectly. Have had not one issue with this esc for over 2 years now. Would buy again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Running an APC 16x12 on 8 cells works perfectly. Have had not one issue with this esc for over 2 years now. Would buy again.

Eigentlich wrde ich dem Teil keinen eintzigen Stern verleihen. Nur nach zwei Rundflge ist das Teil abgeraucht. Schwach.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Eigentlich wrde ich dem Teil keinen eintzigen Stern verleihen. Nur nach zwei Rundflge ist das Teil abgeraucht. Schwach.

Does what it is made for. Runs on 10S and motor is smooth, regulation is linear and it seems to reach its specs. So as of now, good product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does what it is made for. Runs on 10S and motor is smooth, regulation is linear and it seems to reach its specs. So as of now, good product.

Works as it should. No issues so far. recomended product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works as it should. No issues so far. recomended product.

Der Regler arbeitet mit einem SK 6354/245 und 10S perfekt. Gutes Leerlaufverhalten.
Preis/Leistung passt. Wrde ich wieder kaufen

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Der Regler arbeitet mit einem SK 6354/245 und 10S perfekt. Gutes Leerlaufverhalten.
Preis/Leistung passt. Wrde ich wieder kaufen

I am using this for my mountainboard. Don't buy those for your project if you don't have V-brakes. Braking with this esc will block your wheel. Overall good preformance on 10S with 2.7kW 6364 SK3. Smooth throttle response. I have aprox. 50km on my board and everything seems fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using this for my mountainboard. Don't buy those for your project if you don't have V-brakes. Braking with this esc will block your wheel. Overall good preformance on 10S with 2.7kW 6364 SK3. Smooth throttle response. I have aprox. 50km on my board and everything seems fine.

  1. 1
  2. 2
Customer files
Nick's Turnigy Dlux HV Programming Guide Download [192]
Heatsink expansion Download [218]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!