Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Turnigy DSR-A Einziehfahrwerk

Turnigy DSR-A Einziehfahrwerk

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
285 g
SKU:
TGY-DSRA
Product
Description

Turnigy DSR-Serie elektronische Rückzugs-Systeme verfügen über alle Metallgetriebe und Advanced Micro-Controller mit einem integrierten Schaltkreis automatisch die Rückzugs zu stoppen und ein Verklemmen Probleme zu erholen. Die integrierte Schaltung schützt auch gegen Überstrom zu ziehen. Turnigy DSR Serie fährt auch Feature Arbeits Aufhängung, lenkbaren Bugrad und alle erforderlichen Teile, die zieht sich zurück in Ihr Flugzeug zu installieren.

spec:
Bugrad: 35x10mm
Nasenbein: 110mm (vom Drehpunkt nach unten des Rades)
Haupt Rad: 40x12mm
Hauptstrebe: 115mm (vom Drehpunkt nach unten des Rades)
Montageplatte: 35x33mm
Systemgewicht: 173g (Inc alle Leitungen und Hardware)
AUW Belastung: 3,4 kg
Spannung: 4.8 ~ 6.0V
Stromaufnahme: 0.32A für 2 Sek

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    TGY-DSRA
  • Brand:
    Nicht zutreffend
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    285.00
  • Länge:
    205.00
  • Breite:
    56.00
  • Höhe
    85.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The pins that are connected to the retract where the oleo leg is sitting in are week break ezy had to remove and put stainless steel shaft in for stronger support
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wont be ordering again. I placed an order when there was 8 in stock I got an email saying there on back order. Not happy!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice looking retracts ezy to install work great.The only thing that Hobby king should add in there listing information is for what size plain that they are suited for as the wheels are small even though the dimension of wheels are described,the length of the arms are good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered these, and overall they're pretty awesome so far. Unfortunately the struts are much longer than advertised. Both the mains and front are 149mm from the pivot to the bottom of the wheel. Unfortunately the struts are only drilled down 25mm, so trimming them down will take a lot of work. I won't be able to use them in the plane I ordered them for (based on HK recommendation), but I can find something to put them in.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Avec impatience j'ai reu mon ensemble de train rtractable. Les essais de fonctionnement sont parfaits. Il faut calibrer les roues en mousse par un passage sur une perceuse rapide et un morceau de papier de verre.L'ensemble est mont sur un Fournier RF4.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice, sturdy retracts. Setting up nose wheel steering is a fiddly task (my issue was that the gear bay I had to work with was very narrow) but works well once you get there.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice built gear. Nice and smooth operation. Also servo-less and no extra space using servos needed. Nice quality wheels. And actual suspension for forgiving landings.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have cycled these with 6v. they run pretty smooth. Build quality is nice
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered these by mistake for my F16 model. They are of the wrong configuration for it, because the wheels are mounted at 0 degrees, and i needed the type 'C' wheels, which are mounted at a 20 degree offset. Having been pleasantly surprised at the speed of delivery, I was mad at myself for making this mistake. But instead of returning them for the correct ones, and having to wait another 3 or 4 weeks, I decided to see if I could adapt them for my F16. I undid the grubscrews that hold the wheel axle to the strut, and measured the thickness. I then bought a length of steel rod the same size, bent a 20 degree angle into it, and then trimmed them to length. Refitted them to the struts, and retained the wheels onto the axles with collets from the original kit wheels...and they are perfect!! Such an easy fix, and I am surprised the manufacturers don't make this simple for themselves AND us, by supplying a kit of two different axles for either 0 degree or 20 degree offsets. Would save themselves a lot of production costs.

Thanks Hobbyking! Shame you don't carry more products in Europe to facilitate delivery here...how about it?

Nick Cann
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very riggy, though a littlt bit expensive, but it's worthy
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.